Question about Philips Magnavox Learning Universal Remote

Open Question

Remote code for ATLAS DVR-1056 remote control

Hello, I just purchased a new HD Digital Video Recorder. It came with a Universal Electronics DVR-1056 remote control. The remote control is working as expected except when I try to program the AUDio device key. I am trying to use it to control my Kenwood KR-A4080 Audio Amp/Tuner. I have tried all the recommendations and Kenwood codes in the User Guide to no avail. I called the manufacturer of the Digital terminal to find out if there was another manufacturer code besides those listed in the user guide - they looked at your web site which did not provide additional codes. Here are some of the things I have done to further diagnose the problem:

  • I used the AUD key to successfully program my CD Player. This confirms that the AUD key is working as expected.
  • I followed the procedure to search for the correct code to no avail. I pressed the "CH+" key 100 times to make sure I was not stopping too soon. I also successfully tested this procedure with another device to confirm that I was following the procedure correctly.
  • I confirmed that my Kenwood Audio Amp/Tuner was working correctly: I used its remote to turn it on and off.
  • My previous Digital Cable unit was using a Universal Electronics Millennium-4 remote. This remote can still turn my Kenwood Audio Amp/Tuner on and off. Further confirming that I don't have a problem with my Kenwood Audio Amp/Tuner. The code it uses is 1027.
  • I tried code 1027 multiple times with my new DVR-1056 remote and it does not work: the AUD key does not blink twice after I enter the code and the Kenwood Audio Amp/Tuner does not turn On/Off. I also noted that the user guide does not list 1027 as a Kenwood code any longer. The Millennium-4 remote user guide listed 1027 for Kenwood.
It appears to me that the DVR-1056 remote does not produce code 1027 which is the code needed by my Kenwood Audio Amp/Tuner. Any help you can provide to correct this limitation with the DVR-1056 remote would be appreciated. I am wondering if there is a firmware update to resolve this. Many thanks, Renaud Caron

Posted by on

4 Suggested Answers

SOURCE: need set up code for my universal remote

Mail me also chainlu@yahoo.com

Posted on Oct 03, 2008


  • 7 Answers

SOURCE: Remote control OR Remote control code.

http://www.urc.philips.com/ This link will take you to the Philips Support site where you can download manuals and code sheets for your remote. You may have to do a manual search for you code. The manual has instructions to do this. Good Luck!!

Posted on Mar 29, 2009

dr reed
  • 379 Answers

SOURCE: Can't program universal remote for my 1994

This should help - http://www.urc.philips.com/
Hope I helped Dr Reed

Posted on Apr 05, 2010

gopakumarg43
  • 68250 Answers

SOURCE: I'm using a philips magnavox universal remote and

0004 0009 0044 0135 0049 0051 0189 0053 0147 0039 0130 0227 0233 0250 0252 0254 0257 0265 0266 0310 0325 0456 0040 0041 0042 0021 0023 0024 0179 0045 0025 0027 0030 0032 0034 0035 0037

Posted on Mar 19, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an HD access modeled ETA 1030 converter box and I have a Time Warner Cable universal remotes I was trying to see if there was a code for that?


      Universal Remote Control Code Finder. Philipsuniversal remote controls can operate audio and video devices of almost any brand. For each of your audio/video devices, you have to enter a Device Code in the universal remote control.

      Universal Remote Control Code Finder

      www.urc.philips.com/
    Feedback

    GE Universal Remote Codes ' Jasco

    https://jascoproducts.com/support/ge-universal-remote-codes
    Note: If your remote was purchased before January 2006 Click Here for the 3-digitremote code list. Program your GE Universal Remote using the correct code list and instructions.

    Universal Remote Control Codes

    www.remotecodelist.com/

Feb 05, 2016 | Universal Remote Controls

1 Answer

I'M LOOKING FOR THE 4 DIGIT CODES FOR A PIXEL TV TO SET UP A UNIVERSAL REMOTE CONTROL


How can I manually setup my universal remote control?

www.p4c.philips.com/cgi-bin/cpindex.pl?...
Philips LCD TV 32PFL7684H 81 cm (32") Full HD 1080p digital TV with Pixel Precise HD. 32PFL7684H/12. 32PFL7684H/12. Search for information about this product. Product ... Enter the 4-digit RC code of the device you wish to setup.

26PF7521D/10 26" LCD digital widescreen flat TV Pixel ...

www.p4c.philips.com/cgi-bin/cpindex.pl?...
Search for information about this product ... In digital mode, press the 'DIGITAL TV/MENU' button on the remote control to display the setup menu. Press the cursor up/down button to ACCESS RESTRICTIONS and press the cursor ... Note: If you have forgotten your personal 4-digit pin code, enter the universal code (0711).

Searching for Your Code - Universal Electronics Remote ...

www.urcsupport.com/html.php?page_id=314

Dec 22, 2015 | Universal Remote Control Remote Controls

1 Answer

NEED SET UP CODE FOR A "ONE-FOR-ALL UNIVERSAL REMOTE (4 DIGIT) REMOTE # URC-1056 1303...TV PLDE3992A TV IS PROSCAN


Check these codes. 0009 0186 0217 0206 0163. If you wish to get more codes, check this link.

Feb 12, 2013 | Remote Controls

1 Answer

Need a code for my Sony RM-Y16 Remote to split screen with my Comcast DVR


It is possible that this remote will not program to your Comcast dvr. Your DVR is probably newer than the remote and has new codes that the remote doesn't support. The only thing you can do now, is either purchase a new universal remote that supports both units. or use your Comcast remote to program it to your TV. the Comcast remotes are programmable.

Oct 07, 2012 | Sony RM-Y916 Remote Control

1 Answer

I need a replacement remote control for Everfocus EDVR16D1-250 Digital Video Recorder DVR DVD can any one help


you can purchase a programable universal remote at most electronic stores, if your looking for a factory replacement I would check out this web site. I hope this helps.

http://www.geminicomputersinc.com/security-everfocus-electronics-corp-.html

Sep 25, 2009 | Remote Controls

1 Answer

Universal remote control rf20 code for directv hd-dvr


you will have to buy the logtec harmony 520 remote it programs on internet and works great

Feb 14, 2009 | Universal Remote Control DIRECTV Universal...

1 Answer

Radio shack universal remote 15-2200...codes for dish dvr


http://www.radioshack.com/product/index.jsp?productId=2454737&tab=support

the manual is below on pdf format.
Greetings
Rolo.

Nov 27, 2008 | Remote Controls

1 Answer

Universal Remote


Try going to urcsupport.com. This is the site for universal electronics who manufacture the Atlas remote. You can search here for extra codes.

Oct 24, 2008 | Remote Controls

1 Answer

Need set up code for my universal remote


Mail me also chainlu@yahoo.com

May 18, 2008 | Remote Controls

Not finding what you are looking for?
Philips Magnavox Learning Universal Remote Logo

Related Topics:

1,962 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Remote Controls Experts

Ross Keen

Level 3 Expert

1138 Answers

gbob59

Level 3 Expert

2963 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

61 Answers

Are you a Philips Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...