Question about Milwaukee 0822 24 V18 Driver Drill Kit

1 Answer

2 Milwaukee 18VDrills stopped working - NEED repair help

HI
I have 2 Milwaukee drills, and they both went out on the same day!! One simply stopped running (as if the battery suddenly died-- but it was charged), and the other went out, and when I tapped on it it would start again. Unfortunately it wouldnt run in the vertical position, and finally just stopped working all together after about 20minutes of this. I would like to repair them, It seems like it should be an easy fix. They re bout great drills, and I cant bring myself to just chuck a big$ item like these are!!
Thanks!

Posted by on

  • Anonymous Mar 29, 2014

    i have a milwaukee m18 cordless drill but it has stopped working, but if i tip it upside down and tap it it will work,Are there brushes on this model and if so could this be the problem and if so is it a easy job to replace and where do i buy the parts, Thanks

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 25 Answers

This may not be as easy as you think. The first one my have trouble with the trigger switch, but it could be the motor. Without checking continuity, or replacing them individually you will not be able to tell which one is bad.

Another problem could be the brushes. That is what is most likely wrong with the 2nd one. Remove the 2 black screw caps on the rear of the drill, and remove the carbon brushes. Do they look worn? If so they will need to be replaced. If this is the case the motor may be breaking down, and wearing the brushes down too fast.

The good news is that Milwaukee Tools, offer a 5 year limited warranty, If you have a receipt, or can read the serial number. Take it in, or mail it to a service center. They will take care of it for you if they are less then 5 years old.


Posted on Apr 18, 2009

  • Roeh Apr 19, 2009

    Sorry this model drill does not have brushes that are easily accessible. Also Milwaukee does not sell the brushes for this tool, individually.

    You may be able to disassemble the housing and check visually at the back of the motor. The brushes are able to contact the motor armature with the help of a spring for each brush. Check to see if the spring is still pushing. If the area is blackened excessively replace the motor.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drill works perfectly in gear 2, but its like gear 1 doesnt engage properly, it just rattles and doesnt rotate when it comes under even slight pressure


This sounds like stripped gears, happens if you switch the gears while unit is running. you have to disassemble and replace what is damaged. Not always very easy for a home repair, consider a tool shop for this task.

Oct 11, 2010 | Milwaukee Tool Milwaukee 2601 22 18V Li...

1 Answer

Need forward/reverse switch for older red and metal heavy duty 1/2 inch 7amp milwaukee drill serial number 0007196072.


Link to find parts list:

http://www.milwaukeetool.com/CMS/Diagrams/54-10-4006.pdf

You can google the 23-66-1020 part number and find numerous suppliers.



RECALL NOTICE!

Milwaukee is providing a no-charge warranty service to owners of 1610-1, 1630-1 1/2" Compact Hole-Shooter Drills and

1670-1, 1675-1 1/2" Hole-Hawg® Drills. We are taking this action because under certain circumstances the switch of the drill

may stick in the "on" position, which could lessen control of the product, posing a risk of injury to the operator.

1610-1, 1630-1 1/2" Compact Hole-Shooter Drills and 1670-1, 1675-1 1/2" Hole-Hawg® Drills within the serial number

ranges shown below and sold between May 30,2000 and February 27, 2001 are affected.

Nameplate Catalog Number Serial Number Range

1610-1 700B400200013 thru 700B400480097

1630-1 718B400230057 thru 718B400480118

1670-1 472B400200061 thru 472B400440188

1675-1 413B400190567 thru 413B400522000

Drills listed should be inspected for the presence of a 23-66-1020 Switch with a date code within 0 0 2 1 t h r o u g h 0044.

If the unit contains a subject dated coded 23-66-1020 switch, please return drill to the nearest Milwaukee factory Service Center

or Authorized Service station for no-charge warranty replacement of the switch.

Affected switches carry a manufacture's four [4] digit date code of 0 0 2 1 t h r u 0044 imprinted on its body.

If nameplate has an 'X' stamped into the tool's nameplate, next to the catalog number, the tool has been repaired and the

defective switch has already been replaced.

If you need assistance in locating the service facility nearest you or have questions please call 1.800.729.3878

Oct 05, 2010 | Milwaukee 1670 1 Drill 1/2 900 Hole Hawg

1 Answer

Milwaukee c 18 dd model parts list/manual


here is a site where you can see the schematics and buy the parts I hope it works for you:
http://www.toolpartsdirect.com/milwaukee/milwaukee-7.html

if it does, don't forget to rate me
thx

May 21, 2010 | Milwaukee Drills

1 Answer

Milwaukee 1/2 lithium ion 18v drill not working


I have the same problem and its about a year old too.

Dec 05, 2009 | Milwaukee 2610-20 18V Cordless M18 High...

2 Answers

Can I fixed my old 18v milwaukee battery. Jack


what is wrong with it? If it is dead usually there is nothing that can be done, if it is melted you can try cleaning the contacts and looking for a loose connection. Let me know and I will try and help

Nov 19, 2009 | Milwaukee Tool Milwaukee 48 11 2830...

1 Answer

Hi i have a problem with my v18 pd milwaukie drill/driver. The motor stop has stopped working and i would like to get it fixed. Any ideas?....


Sure give me the zip code and city/state and I will try and find an authorized service station close to you. You can also send it direct to Milwaukee but a center closer would probably be faster. Let me know

Sep 09, 2009 | Milwaukee Tool Drills

1 Answer

Milwaukee hole hawg fan replacement


the fan need a press to be installed and uninstalled.... handed the tool off to the owner of my company for professional repair

Mar 03, 2009 | Milwaukee Tool Drills

Not finding what you are looking for?
Milwaukee 0822 24 V18 Driver Drill Kit Logo

504 people viewed this question

Ask a Question

Usually answered in minutes!

Top Milwaukee Drills Experts

River bottom

Level 2 Expert

174 Answers

Jim Thurston

Level 3 Expert

669 Answers

Mike

Level 3 Expert

4332 Answers

Are you a Milwaukee Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...