Question about Vizio L32 32 in. LCD HDTV

1 Answer

Tv screen went blank

Tried to turn tv off,cannot turn power off to tv from remote or at tv.no volume control or channel contol.no channel,volume,or any other button either on tv or remote.unplug tv plug back in. power turns tv on with either remote or at tv unit,but no picture and still no function control from tv unit or remote. still no picture only vizio lite comes on then nothing.have to unplug to turn power off.
tv-vizio vw32l hdtv10a

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 88 Answers

Sound like the inverter circuit board problem. check & replace back same part# inverter circuit board. hopefully could help!!

Posted on May 17, 2010

  • scratchy head Nov 06, 2012

    Mr. Garlz sounds like the problem I'm having sir, any diy solution for *dummies* to help resolve this issue!?

  • scratchy head Nov 06, 2012

    Mr. Garlz sounds like I have this problem with my Vizio e470vle, any DIY solution for this issue to resolve. For *DUMMIES* Sir!?

×

2 Suggested Answers

  • 3 Answers

SOURCE: only vizio light on

why should i tell you (fixYa) how i fixed the problem for free? You wanted to charge me for your info so i think it's only fair that i charge you for mines. I did figure out and solved the problem.

Posted on Dec 31, 2008

  • 4 Answers

SOURCE: only vizio light come on then nothing. have to unplug to turn off

there a problem on power side.. chage the ic and the resistor going to ic and check also the signal diode.

Posted on Jan 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bauhn 80cm tv model no. ATV-32HDC1N


Could be internal power supply failure.

Dec 25, 2013 | Flat Panel Televisions

1 Answer

Volume at max and won't go down


This sounds like a common problem on these TVs. Try a factory reset:

1. Press and hold "Menu" and "Channel+" on the TV. (do not use the remote)
2. Using the other hand, press the Power button.
3. A small screen should appear in the top left part of the screen.
4. Using the remote, select "Memory Recall" and Enter.
5. Power off and reboot the TV and Computer.
6. Run channel auto-scan to regain the picture.

Aug 12, 2012 | AOC L42H861 42 in. LCD TV

1 Answer

My sony bravia klv40ex600 won't turn on,the light indicator for power,volume and channel is on, the screen is still black


Hi, have you tried pressing the TV button that is under the On/Off button on top right hand side of remote control? Some times its possible to accidently press the DVD or VCR controls and this by-passes the TV as a remote?
Another cause can be a poor or low battery in the remote itself. If you have no luck let me know & we can try some more things, however, I have heard that The On/Off Switch on the TV can be a problem. Goodluck, Jon..

Jul 22, 2012 | Sony BRAVIA KDL-40S2010 40 in. LCD...

1 Answer

It seems to forget its freeview channels and starts to run through every channel, interupting tv service provide by scart connection to talktalk box. First sympton is the sound volume icon appears on...


Tries tv and the box unplug,replug it back like about an hour later.For the tv to do a resetting itself back to the factory setting.The box to upgraded it softwares.Tv should be working again.If still have the same problems.Take ur tv backcover aparts and disconnection of the tv side manual control board PCB wire connection plug in that have like Power,Channel - +,Volme - + and Menu so on buttons switches.Turn the tv on and see if tv funtions correctly If yes than the tv manual cotrol buttons PCB board have to be change.If the manual contol board is diconnected from the tv Tuner signal board and have the same problems.Than ur tv have a bigger problems,the tv Tuner signal board is the causes and the problems.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish manual control PCB board or the tv Tuner signal boards for the replacement.

Apr 07, 2011 | Samsung B2230HD LCD TV

1 Answer

Need the tv code for samsung ph t4254 to program my bell remote to my tv


Hi,

The codes for Samsung TVs on a Bell remote are:

505, 506, 516, 523, 526, 566,

573, 612, 627, 647, 652, 653,

654, 655, 656, 658, 659, 664,

665, 667, 669, 670, 679, 680,
704, 717, 730, 738

Try each of the above codes in turn until you find the one which works best, i.e. controls most functions. This may be limited to contolling the power, volume and channel functions. I have also pasted the programming instructions for your remote below, in case you need them.

Regards,
BElectric.


Program your remote control to operate your TV

NOTE: Before you start, locate the remote codes for the TV and write them down.
Follow these steps to program your remote control to work with your TV:

  1. Press and hold the TV button on the remote until the SAT, VCR and AUX buttons light up.
  2. Let go of the TV button. It should start to flash.
  3. While the TV button is flashing, enter one of the 3-digit codes for the TV that you wrote down earlier.
  4. After entering the 3-digit code, press the # button on the remote. If the code was entered successfully, the TV light will flash 3 times.
  5. Try to control the TV's volume and power.
  6. If the remote did not control the TV, simply repeat steps 1 to 5 with another code from the list.
If you tried all the codes provided for the manufacturer, try the following steps to find another code.
  1. Make sure the TV is on.
  2. Press and hold the TV button on the remote until the SAT, TV and VCR buttons light up.
  3. Let go of the TV button. The TV button should start to flash.
  4. Press the Power button on the remote control. The TV button will stay lit.
  5. Press the up arrow on the remote every second until the TV turns off.
  6. When the TV turns off, press the # button on the remote to lock the code. If the scan was successful, the TV light will flash 3 times.
Your remote should now be programmed to work with your TV.

Nov 23, 2010 | Flat Panel Televisions

1 Answer

My tv is block and i dont know wat to do. how can i unblock it?


Don't use the remote control the signal it block.Go to ur manual contol on the tv right side.Push the power button to turn tv on.Push button Menu now U in the tv Menu,Use the volume + or - button move the Menu function to OPTION,now use the Channel + or - go down to the word said Operation lock out(ON) Now push manual contol button said INPUT.Now the word said Operation lock out(OFF).Now remote control is relase,u can use the remote control now.Tell me this work ok.This is how i unlock the Sharp Aquos tv.

May 09, 2010 | Hisense TL1700 17 in. LCD Television

1 Answer

Lg 42lc7d turns on to blank screen doesnt respond to any request


I need sreen for LG 4LC7D-UB because the screen is damaged

Mar 16, 2009 | LG 42LC7D-UB Television

2 Answers

Only vizio light on


why should i tell you (fixYa) how i fixed the problem for free? You wanted to charge me for your info so i think it's only fair that i charge you for mines. I did figure out and solved the problem.

Dec 30, 2008 | Vizio L32 32 in. LCD HDTV

1 Answer

Only vizio light come on then nothing. have to unplug to turn off


there a problem on power side.. chage the ic and the resistor going to ic and check also the signal diode.

Dec 30, 2008 | Vizio L32 32 in. LCD HDTV

2 Answers

Nothig bu a blue screen shows when turned on


Blue screen of Death?
No, this is not windoze.

can you change channels?
a blue screen usually means that you don't have a signal.
Is it hooked up through dvd/vcr player?

Try a straight connection to cable or antenna.

If it remains, then it requires surgery.

Sep 30, 2008 | LG 42LC2D 42 in. LCD HDTV

Not finding what you are looking for?
Vizio L32 32 in. LCD HDTV Logo

1,167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68427 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Vizio Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...