Question about Kolcraft Universal 46250L-N

1 Answer

I need to put the straps back in seat

I took the seat apart to wash the belt and padding . now i cant seem to get the satrap back in it
the seat is a kolcraft auto mate

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 151 Answers

When I was doing research on your problem, I came across this recall. Please read and see if it relates to your product. RECALL ID# 66785 - CHILD SEAT Recall Date: July 28, 1993 Model Affected: AUTOMATE Recall Summary: THE TONGUE OF THE BUCKLE ASSEMBLY CAN CORRODE. THIS DOES NOT COMPLY WITH FMVSS 213, "CHILD RESTRAINT SYSTEMS." ALSO, THE LABEL WITH USE AND SAFETY INSTRUCTIONS IS MISSING FROM THE PLAYSKOOL MODEL. Consequences: BUCKLE ASSEMBLY CORROSION COULD AFFECT THE SAFETYPERFORMANCE OF THE CHILD RESTRAINT. THE MISSING LABEL MAY CAUSE IMPROPER USEOF THE CHILD SAFETY SEAT. Remedy: KOLCRAFT WILL PROVIDE OWNERS WITH A FREE REPLACEMENT HARNESS ASSEMBLY AND INSTALLATION INSTRUCTIONS. OWNERS OF THE AFFECTED CHILD SEATS SHOULD CALL KOLCRAFT TOLL-FREE AT 1-800-453-7673, TO OBTAIN A NEW REPLACEMENT HARNESS ASSEMBLY. Notes: KOLCRAFT ENTERPRISES, INC. Potential Car Seats Affected: 307017

Posted on Dec 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to put the shlder/lap strap back in


the center of the belt will be under the seat coming up through the holes, place the two clips on the strap followed by the chest clip, then the neck protector pads. Push the ends of the strap through the two top holes. Route it down over the metal but under the plastic (on the back side) and attach both ends to the metal adjuster underneath. The receiver clip, you just turn 90 degrees and push through desired hole until the end catches.

Jan 24, 2010 | Eddie Bauer 3-In-1 with Latch

2 Answers

Removing seat cover maxi cosi priorifix


To be able to remove the seat cover from your seat you have to 'unhook' the seat belts at the back of the seat:
First extend the seat belt to the maximum length.
Then put the seat at the maximum recline.
At the back of the seat-'shell' you will then see a metal hook that hold the shoulder straps: unhook and pull forward.

Reassembly is just the reverse.

A few more tips when removing the cover from a PrioriFix: take care not to damage the white extruded foam when pulling the belts forward and when taking off the cover. When the foam is not protected by the padding it may easily snap.

The seat padding is cold wash only and no spin-dry, otherwise the seams may loosen.

Please don't hesitate to use the contact form at http://www.babycare.nl if you need any further assistance.

With kind regards,
Babycare.nl Sales Desk,
Erwin de Raad

Jun 21, 2009 | Maxi-Cosi CabrioFix (Black Reflection)...

1 Answer

Need help reassembling the straps after washing the seat cover


First turn seat upside down. There should be a slot on each side under the seat, run strap through each slot and turn back over. Pull strap up evenly, put on clasp part on each side, then put chest clasps on, run your straps through back and secure to strap comes between legs.

May 08, 2009 | Century Encore 5-point Harness

1 Answer

Cant put the car seat back together


took the straps off and can't put back together

Apr 02, 2009 | Cosco Alpha Omega 22-180 - with Shield

1 Answer

Harness straps off cosco car seat to wash cover, help reattaching


I need help putting the straps back on a Cosco 5-point car seat. Took it apart to wash and can't get it back together

Mar 08, 2009 | Century Encore 5-point Harness

1 Answer

Cant tighten straps


To answer this in detail, I need the car seat name and manufacturer. Always the best bet is to look in the original owner's manual. If you don't have this, it can be downloaded from the manufacturer's website.

Sep 29, 2008 | Evenflo Chase Comfort Touch

2 Answers

Putting the belts back after washing


I need help with putting back on the straps on a Evenflo car seat. I lost the manual guide and now
I'm stuck on how to put it back together. Can you please help me?
E-Mail me with some instrutions. P-L-E-A-S-E.........

THANK YOU!!!!!!!

Sep 12, 2008 | Evenflo Triumph 5 Comfort Touch

2 Answers

The belts


did you have the user manual

May 07, 2008 | Cosco High Back Booster 22-200 /22-207

Not finding what you are looking for?
Kolcraft Universal 46250L-N Logo

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kolcraft Baby & Toddler Car Seats Experts

Iron
Iron

Level 3 Expert

3018 Answers

Rusty

Level 1 Expert

7 Answers

Jennifer Rock
Jennifer Rock

Level 2 Expert

105 Answers

Are you a Kolcraft Baby and Toddler Car Seat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...