Question about Sanyo PLC-SW30 Multimedia Projector

2 Answers

Connecting my pc to a sanyo plc sw30 projector

Hi, I have bought a second hand plc sw30 projector and am having trouble getting my photos up on the screen. I have attached the usb lead and scart (?) lead and I have my images from my digital camera on my pc but they're not being shown through the projector. What am I doing wrong? Sorry, but i'm really not very good with computers...

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 43 Answers

True, The 15 pin connector at the back of your computer (the one your screen normally plucs into {its blue color coded}) Is your vga output, Now on the projector side, you have the same connector, Called your VGA input. You just need to connect a male-male vga cable between your projector, and pc, and puth the AUTOSEARCH button on the projector. And you should get an image.
Here is the repair schematic.. They cover EVERYTHING. from repairing, to usage.
http://yama.co.za/forum/index.php?topic=146.0

Posted on Dec 03, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

Never mind the usb, u need to only connect the video output ( yellow rcs connector ) to the vido input of the projector & it will work fine!!!

Posted on Feb 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sanyo plc-sw30 i have a problem when i power on the projector , there is no power lamp on a very slow light is visible and the projector shut down and the fan are in very high power


The uProcessor thinks that it has overheated and is frantically trying to cool down what it thinks is a hot lamp.
This condition has many causes from an exhausted lamp to lamp ballast fault or even a power supply fault or a heat sensor/fan fault.

Mar 30, 2011 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

How to fix shadow (stain) projected onto screen by projector Sanyo PLC-SW30


This could be showing the signs of the lamp needing replacement. if not dust has accumulated (clean filters) onto the mirrors in the projector.

May 15, 2010 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

I can't get my Sanyo Pro-X (PLC-SU22n) to communicate with my lap


Dont know what your problem with your PROJ is... But I have the same proj, And had enless cr@p with mine.
Fixed almost anything on it, Using the following service manual.
Good luck,

http://yama.co.za/forum/index.php?topic=146.0

Jun 13, 2009 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

Opening a Sanyo PLC SW35 projector


Hi There, Ive recently repaired my sanyo plc-sw30/35, Had many issues. Ive made the ful schematic available on my site http://www.entwan.netau.net/1_8_Repair-Schematics.html

This should help you.

Apr 20, 2009 | Sanyo PLC-SW35 Multimedia Projector

1 Answer

Can not make picture bigger on my Sanyo PLC-SW20 projector


depending on the size of the surface you are projecting on, and what the zoom capacity of your lens is, you probably only have one choice available to you, and that is to move your projector farther away from what you are trying to project onto.....

hope this helps!

Jan 10, 2009 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

Sanyo plc sw30 help


i had a sanyo plc sw30 wich had the same problem and it turned out to be the bulb replaced it with new one and this seemed to solve the problem. Theres a few places to get new ones but they are not cheap looking at between £150 to £180 hope this helps

Nov 02, 2008 | Sanyo PLC-SW30 Multimedia Projector

2 Answers

Sanyo PLC-SW30


The filters are starting to show their age. This is a normal occurance for projectors and is the result of heat. The filters and/or the mirrors might need to be changed.
Dan

May 08, 2008 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

Sanyo PLC-SW30 Multimedia... Problem


sanyo_plc_sw30_multimedia_problem i need support

Feb 27, 2008 | Sanyo PLC-SW30 Multimedia Projector

Not finding what you are looking for?
Sanyo PLC-SW30 Multimedia Projector Logo

441 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Multimedia Projectors Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68408 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Are you a Sanyo Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...