Question about iLO (2 GB) MP3 Player

1 Answer

Ilo mp3 2gb

One morning i turn the mp3 on and it just blinks and stays on the main screen "ilo". it was working perfectly the day before. what's wrong with it?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 8,596 Answers

This is the worst mp3 player ever invented - i have to tell you this up front. There is no driver, the company does not support the product anymore - I would return it now while you still can.

Either the device is bad, the pc port is bad, or the software is faulty. Try connecting to different usb port, then a usb port on a different pc with a compatible os. If still not recognized, then there is physical damage to player.

Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

Posted on Jul 06, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Broksonic Flat Panel TV, tried to turn back on TV and Green LED light is blinking and screen pops up a few sec with white and colored lines and the turns off

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.

Oct 21, 2014 | Broksonic Televison & Video

1 Answer

Red light to turn on tv is blinking but the tv will not turn on with the tv remote or the cable remote what is wrong

Blinking red light indicates some fault to its main board. Contact any experienced service technician.

Oct 04, 2012 | iLO IWT3206 TV

2 Answers

Rca remote not programming with tv

I just got the same remote to work.  I did the auto scan method in the instructions.  turn on the tv, hold the tv and power button on the remote down until it stays lit.  Then press the play button, the remote will blink 10 times, press play again and the tv should turn off in a few blinks.  then when the remote finishes blinking, press the reverse button until the tv turns on again, when the tv turns on, press the stop button.  Hope this helps!

Mar 23, 2009 | iLO 2600 Television

1 Answer

Sound but no picture

check with a flashlight against the screen for picture, if present backlight inverter has failed.

Dec 07, 2008 | iLO 3200 32 in. LCD Television

1 Answer


note - dont use the media player in ilo player using computer.
a conflict between media player and mp3 player to copy songs to your player use real player gold it will sync your player perfectly

Apr 07, 2008 | iLO (2 GB) MP3 Player

1 Answer


My ilo model number mp-556 suddenly stopped working so I put in a new battery and all I could get out of it was a loading screen. I did some researching online and came up with this post <a herf=""></a> I followed what he said and it worked.

Feb 25, 2008 | iLO (2 GB) MP3 Player

2 Answers


In regards to the ILO 32HD TV, I too had problems with the remote stop working after 3 months and the buttons on the TV not working. I called Initial Technology (909)392-5583, informed them of my issue, letting them know I was highly upset at paying close to $1000 for a TV that hasn't lasted 4 months, and asked what was going to be done about it. They requested I send the TV to them for repairs free of charge. I didn't have the original box, so they sent me a box to send it in, as well as the labels to attach when I send it back. I was free of charge for me to send, I just had to get the package to UPS. I have yet to receive my TV back, so I can't comment on if the repairs worked. I must say I was stunned to see that ILO was selling such a bad product, and the problems with customer support. I have numerous ILO products and this is the first MAJOR disappointment. No more ILO products in my future.

Feb 22, 2008 | iLO 3200 32 in. LCD Television

1 Answer

ILO MP3 player not working if you have a ilo model mp-556 (on the back cover) this page has links to the firmware ... i follow the instruction and got mine working.

Aug 20, 2007 | iLO MP3 Player

Not finding what you are looking for?
iLO (2 GB) MP3 Player Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Audio Players & Recorders Experts

Mohamed Ismail
Mohamed Ismail

Level 3 Expert

462 Answers


Level 3 Expert

102366 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you an iLO Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides