- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sorry the tv is to old for us to help with the av change. I would recommend a RF modulator to hook your DVD to the Tv. If you use one of the modulators you will not need to change the input of the tv to the AV. You just turn on the DVD player and it will override the Tv signal coming from the antenna or cable. On the link below is what it looks like.
If your connecting the likes of a DVD player, Virgin, Sky etc to your Tv via a scart. Then these should turn your tv onto the required Av channel automatically as a scart send power to the Tv.
Just make sure that you have everything connected up first of all before you turn the power on. Then what I would suggest you do is turn the TV on first then turn the DVD, Cable, Sky on after the tv is already on this should then change to the AV your appliance is connected to.
Hope This helps you out. Please Leave a thumbs up if this clarify things for you.
Thanks but I no longer require assistance. I tried to remove my post but it does not seem possible. I no longer need assistance because I sent the TV back. There is no solution as there is no universal remote code --- ridiculous for a brand new TV set that most people are probably going to want to use with cable!
if the magic eye is used in conjunction with an aerial cable you have to retune one of the analouge channels . this should be in the opperating manual. if you no longer have this try www.tvs-services.com
I just bought a 32" dynex lcd and saw that i couldn't program my two $5 ge remotes to work it. From reading in this forum and others I'm not the only one with the problem, I thought I was stuck with only the dynex remote. But the dynex website tells you how to get universal remotes to work,
It tells you to try the codes for Orion, Emerson, Memorex, Sansui, Sylvania, Zenith. The second orion code worked for me. both my ge remotes look and work the same but one uses a four digit code and the other uses a three digit code. I used 0135 on one and 135 on the other. There is a good chance that if you try the codes for the brands dynex lists you will find one that works. The 0135 or 135 might work for most dynex tv's.
If you have a ge remote and haven't programmed it for volume punch through you might try it. It allows the tv volume to be controlled using the ge remote even when it's set to something other than tv.