Question about Insignia 37" LCD Flat-Panel HDTV

Open Question

Insignia LCD TV service menu access

Anyone know how to access the service menu of a 32 or 37 inch Insignia LCD HDTV to reconfigure the main board? Thanks.

Posted by on

  • scratch1956 May 19, 2009

    I can get to the service menu by pushing 2580 on the tv remote. I can not get in the part that shows service menu. When i push the arrows on the remote the screen disappears. How can i get in the service menu part?

×

5 Suggested Answers

  • 80 Answers

SOURCE: insignia 15 inch lcd tv cant find replace power cord

part # 485-10144-00
try http://bestbuy.partsearch.com or
https://www.vancebaldwin.com
neither have it but there you go

thanks
scott

Posted on May 30, 2008

  • 1 Answer

SOURCE: Code for cable TV remote - 26" Insignia 720p HDTV

I just bought a 32" Insignia NS-LCD32-09 using the Cox (suddenlink) remote and the code 0463 worked fantastically for me, Thanks!

Posted on Dec 12, 2008

RFICKES
  • 51 Answers

SOURCE: Red tint on my TV, instead of all colors? Reset doesnt work?

Sounds like the component cables are misplaced. Check that, and report back.

Posted on Jan 02, 2009

  • 33 Answers

SOURCE: Sharp aquos hdtv has sound but shows a white screen

yes and no. That particular tv you have is done for, but if you just purchased it 6 months ago, you are still within you 1 year warranty with sharp. they will ask you to take it to a authorized service center and you need to follow through with the process. about a week or 2 will pass and the service center will deem the unit unrepairable and sharp will replace it if they cant solve the problem. give em call..good luck 2u

Posted on Feb 19, 2009

  • 7 Answers

SOURCE: hook up speakers to 32 inch lcd hdtv

"Line" level audio output is available at the audio output phono jacks at the top of the rear panel, but not speaker-level output. So, you'll need an amplifier to use in conjunction with your external speakers. (An alternative would be "powered" or "amplified" speakers that have their own amplifier, but often are less satisfactory acoustically). You don't necessarily need to get a full-fledged "receiver" with multiple in's & out's... I simply used an inexpensive stereo amplifier.

Connect the "Audio L - R" jacks on the rear of the set to the "line" or "aux" inputs on your chosen amplifier and speakers. If you go into the set's Menu - Option - Output Select and set it to "Variable", the internal speakers will be disabled, and you can control the volume (and muting) of the audio sent to the amplifier, and still have "armchair" control of the volume as before... but now with better stereo!

Posted on May 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv image goes black, i dont know if its the back light, or power supple/ inverter how do i know? tv model: NS-32L430A11 Brand: Insignia


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electro-medical.blogspot.com/

To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jun 28, 2016 | Insignia NS-32L430A11 32in 720p Flat Panel...

1 Answer

I have an Insignia tv. I can see everything on the screen, but it flickers rapidly. Can someone help with how to fix?


Check and replace the damaged component/s at its main board. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Nov 10, 2015 | Insignia NS-LCD22-09 LCD HDTV

1 Answer

Hdmi port not working on plasma tv


Contact the authorized service center to rectify this fault. In most cases, the main board might need replacement.

Jul 23, 2013 | Insignia 42" LCD Flat-Panel HDTV

1 Answer

I have a non-functional Sharp LC-32D62U (32") TV.


It would be possible if you can go into service menu and write all settings and implement with the new board by going back in and changing what you wrote down.

Feb 17, 2011 | Sharp Aquos LC-32D62U 32 in. HDTV-Ready...

1 Answer

I have a Insignia 32 inch LCD TV Model number NS-LCD32. It recently started displaying no inputs. The backlight comes on but no inputs/ no sound. Green lines display if you press the menu,input, channel...


The first troubleshooting step would be to measure all the voltages from the power supply to the other circuits boards specially the 5 volts going to the main board. If you have the following: Insignia 6HA0112010 Power Supply, check FU502 for open conditions.
If all the voltages appear normal, then the main board should be replace since is hard to find individual components for a component level repair.
Let me know if you need further assistance.

Aug 21, 2010 | Insignia 32" 720p Flat-Panel LCD HDTV

1 Answer

I have 2 insignias that i changed the dsp board in and it give me a negative picture. how do you get into the service menu and devert it


The service menu is not owner accessible. You can schedule a technician to visit your home by calling 1-888-237-8289 in the U.S. or 1-866-237-8289 in Canada. I hope this helps.

Aug 28, 2009 | Insignia 37" LCD Flat-Panel HDTV

1 Answer

Dell 32 inch LCD Tv volume and menue problems


your main board is not communicating with the tv. it may be on the breaks of going bad, or simply needs a firmware update. questions, email me

May 24, 2009 | Dell W3706MC 37 in. LCD HDTV

1 Answer

My screen is narrower out of nowhere


You should use your on screen menu and move the down arrow to aspect ratio then press the side arrow to the right to change the picture size to the one most suitable for your viewing pleasure. If this does not solve you problem then you may have problems with the video chip and should call Insignia customer service at 1-877-4289 for service. Hope this helps you with your problem.

May 05, 2009 | Insignia 37" LCD Flat-Panel HDTV

1 Answer

Insignia 42" lcd, lost power, turns on and than right off again..


its the problem of ic 343 and ic 344 on the main board which needs replacement as if you are familiar with reparing you can try to check out main board.if not call the repair person. as its advisable.

Mar 05, 2009 | Insignia 42" LCD Flat-Panel HDTV

4 Answers

Hidden or Service menu


thank of you but i need access to menu service please help me
please mail key to access to menu service
thanks of you

Jan 07, 2008 | LG DU-42LZ30 42 in. LCD HDTV

Not finding what you are looking for?
Insignia 37" LCD Flat-Panel HDTV Logo

Related Topics:

2,262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69718 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Cindy Wells

Level 3 Expert

4801 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...