Question about Dryers

Open Question

Bosch dryer doesn't start. double beep.

Double beep when trying to start Bosch Exxcel dryer WTE86304GB/03. the dryer does not start, just does a double beep and the start/stop light flashes. what does the double beep mean and how do i fix it?

Posted by on

  • sia6 Apr 27, 2009

    Bosch Exxcel WTE84307GB dryer powers up then double beep then nothing. Must only be just over a year old. Not amused .. thought I was getting a decent product with Bosch but its the poorest tumble dryer performance Ive ever had as its tangklles clothes and takes ages to dry them whatever setting you use. Steer clear of this.

×

1 Suggested Answer

  • 1 Answer

SOURCE: I have a bosch WTE86304GB/03 tumble dryer red

Hi the problems is not a sensor its the codenser unit. Above the water collector should be a panel on the front of your machine, open the panel and you will see the condeser.covered in fluff, simply remove the condeser and clean it under an outside tap after removing as much fluff as possible by hand. Push back into place when clean and hey presto back to new again.

Posted on Aug 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch vented dryer stops after a few minutes with drying and crease hold/end lights flashing


It could be that it is over heating. I would check the vent tube to see if it's clogged or check the part where you hook up the vent to the dryer

Nov 26, 2015 | Bosch Dryers

2 Answers

Bosch dryer beeps


Two Beeps on my Bosch WTE84100au Condensing Dryer means a thermal overload but also means one of the thermal sensors is faulty .... as if it is always on.
Open the door, pull out the lint catcher and clean around the silver probe (it's like a shiny 1/8" nail sticking into the cavity below the lint catcher). If it still doesn't work (and still 2 beeps), just flick it lightly a couple of times. If it still doesn't work, flick again from the other direction.

bosch-dryer-beeps-0egsa4g0vt3f5pkv1piq2dve-1-0.jpg

bosch-dryer-beeps-0egsa4g0vt3f5pkv1piq2dve-1-2.png

Mar 24, 2014 | Dryers

1 Answer

BOSCH WTE84100 CONDENSOR DRYER .will not start .Power display on and flashing ,all filter are clean, but machine beeps when try to start.


Two Beeps means a thermal overload but also means one of the thermal sensors is faulty .... as if it is always on.
Open the door, pull out the lint catcher and clean around the silver probe (it's like a shiny 1/8" nail sticking into the cavity below the lint catcher). If it still doesn't work (and still 2 beeps), just flick it lightly a couple of times. If it still doesn't work, flick again from the other direction.

1b19dd8a-8b70-42f3-9e38-56109f59cf88.jpg


bosch-wte84100-condensor-dryer-will-0egsa4g0vt3f5pkv1piq2dve-1-2.png

Aug 15, 2011 | Bosch Dryers

1 Answer

I've got a 2 yr old Bosch Exxcel dryer but its in my garage and we've recently had unprecidented cold weather with night temps of -12C The dryer seems to work fine but it keeps stopping after one cycle...


Sorry to read about your problem, I hope this helps you out.

yes and it has to be around 35 to 40 to defrost...may take 3 days at that temp


I tried to help you. Please help me and Rate/Vote on my response, thanks and good luck

Dec 22, 2010 | Bosch Dryers

3 Answers

I have a bosch WTE86304GB/03 tumble dryer red light says empty container, but container is empty, machine keeps stoping and flashing this light on ?


Hi the problems is not a sensor its the codenser unit. Above the water collector should be a panel on the front of your machine, open the panel and you will see the condeser.covered in fluff, simply remove the condeser and clean it under an outside tap after removing as much fluff as possible by hand. Push back into place when clean and hey presto back to new again.

Feb 23, 2010 | Dryers

1 Answer

Filter light flashing on bosch exxcel condenser, repeatedly.


This should help you find a manual.
http://www.managemyhome.com/mmh/products/ManualSearchDisplay.action?psid=31378668&sid=MMHSx20070515x00001a

Tip: Always provide the complete information provided on the manufacturers product information data tag, located on the unit, and not in the user’s manual. This will help you acquire a more accurate and expeditious response to your complaint.


If my assistance helped resolve this issue, please show your appreciation by rating how effective my advice was in resolving this issue.
Thank you,
Dave E. (Illeagle)

"Your satisfaction is my personal reward"

Jun 19, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...