Question about Eureka Altima Upright Vacuum Model 2996AVS Vacuum
The hood will come off if you loosen two screws at the front on top of the hood by the brush bar bit that is slightly raised. Then there's a screw to the left hand side of the upright either below the hose or duster area. Once all screws are undone, the hood should pop off.
Posted on Jan 02, 2009
the belt is on the bottom right (looking at it from the front). the Eureka website does have the manual for download, http://www.eureka.com/service/manuals/80244.pdf
With the vacuum flattened (straightened) out, turn it over and remove the back roller cover, (2 screws) once off, the roller should just pop out on the opposite side (opposite from the belt). Don't forget to turn the roller to center the belt once you have it on.
Posted on Jun 14, 2009
SOURCE: broken belt
Eureka says size U BELT... NO!! I have tried this numerous times. I finally took off a belt from an old vac. and it works !!! dirt devil size 5 belt is the way to go!!
Posted on Aug 18, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 20, 2011 | Eureka Altima Upright Vacuum Model 2996AVS...
Dec 31, 2009 | Eureka Altima Upright Vacuum Model 2996AVS...
Nov 21, 2009 | Eureka Altima Upright Vacuum Model 2996AVS...
Nov 20, 2009 | Eureka Altima Upright Vacuum Model 2996AVS...
Nov 20, 2009 | Eureka Capture Upright Vacuum Vacuum
Nov 06, 2009 | Vacuums
Sep 18, 2009 | Eureka Altima Upright Vacuum Model 2996AVS...
Jun 14, 2009 | Eureka Altima Upright Vacuum Model 2996AVS...
89 people viewed this question
Usually answered in minutes!