Question about Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

How do I use my self cleaning option?

I bought a house with a self cleaning oven but it had no paperwork. I have never had an oven with this option, so I am not sure how to use it.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

It depends on which model you have. Some have automatic locks others have a lever but the door has to be locked in order for self clean to work. Then you will have a knob to turn to "self clean" or a button that says clean or self clean to push then you will very likely have to select a temp and maybe press start. It is a very high heat process it doesn't always smell pleasant normally takes several hours 3-5 hours. The door will remain locked untill clean cycle completes and the oven cools. Then you can open the door and wipe out the ash.

Posted on Jan 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Self cleaned it locked how do i unlock it


door locks on self cleaning ovens , lock automatically so that one cant open door and burn oneself , they should unlock after oven has cooled completely after cycle is over and is safe to touch again , this can take several hours to complete this cycle

Jan 20, 2016 | Samsung Stainless Steel Gas 30" 30 Inch...

1 Answer

Fisher-paykel GW712-AU


unplug. remove lid by opening and bumping to one side. two screws at front of machine under rubber covers. lift top gently, remove bowl ring, 8 clips and one spring. unscrew agitator. you can now remove the inner bowl and clean. theres not filters in this machine.

Dec 04, 2013 | Fisher and Paykel Washing Machines

1 Answer

How do I clean my Kenmore Elite self cleaning oven


Hi from retired Englishman in SW France,

Although you have posted onto the WASHING MACHINE forum I think I can help! With ours there is a switch selection which indicates 'self clean'. All 'self clean' really does is run the oven at a very high temperature which burns the residue to cinder, which you then wipe out!

Anyway methinks you could do with a manual for your oven (this pre-typed advice said 'washer' of course!)- for now and probably later but sorry, FixYa cannot do that direct. Members of the forum are just people from all over the world, probably working from home, and not representing any particular manufacturer ;-0)
???
Manual
You will need to type into your search engine/web browser '(make model number) oven manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount.
You could also try the manufacturer's web site direct ;-0)


If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.

Sep 03, 2011 | Washing Machines

1 Answer

I bought a moffat electric oven 16 months ago it is burning the bottom of the oven housing unit whot is the problem thank you


Hi from retired Englishman in SW France,

You might find it difficult obtaining an answer from us- close, but this is the washing machine forum ;-0(

Try re-posting on the oven one and good luck ;-0)
John C
P.S. if I knew what was causing your problem I would have answered!!!

Mar 13, 2011 | Washing Machines

2 Answers

Door won t lock


Check if the program has finished and returned to release. If not the latch wont operate.

Sep 11, 2010 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

How do I get the door to unlock so that I can restart the washer?


Hello,

There are two ways of solving this type of problem, here are the way out to solve it below
please carefully follow this instruction below

On these units they have a self resetting device that you will need to activate this is done by unplugging the oven for at least one hour then plugging it back in and wait for 5 min then press the normal cancel button or you might even hear a click sound then you will be allowed to unlock it ok and close the door hope this helps you out or

IF you can locate the model number tag (bottom left of door opening) you can look up the manual at www.geappliances.com
The only button on your stove that should make the door lock would be the clean button (self clean model) if that is pressed simply hit the clear/off or cancel key and wait for the door to unlock.
IF the self clean option ran for an hour or so, you will have to wait for the washer to cool down before the lock can un-lock (safety feature)

please rate this solution it helps get better results for our customers like you

thank
you and thanks for using fixya.

Sep 11, 2010 | Maytag Washing Machines

1 Answer

I recieved the following error code on my gas range with self cleaning oven... error code E2 F1... PLEASE HELP ME


Hi


Thanks for using FixYa. F1-E2 error indicates that the oven is too hot & the oven temperature sensor has gone bad and should be replaced to resolve the issue. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Aug 26, 2010 | Washing Machines

1 Answer

When I turn the oven on, it goes into self-cleaning mode.


This sounds to me like your oven may need a new controller board. :(

Dec 14, 2009 | Washing Machines

1 Answer

Amana Touchmatic Heavy Duty Washer Filter Light Flashing


I have the same washer unit and I purchased my washer new in 1989. The flashing filter light is normal. If the light doesn't flash, than the water filter is plugged up. The water filter is self cleaning each time the water empties. You can take off the front panel(two screws at the bottom and the top disengages with metal clips. The water filter in at the bottom on the right, white plastic housing. There is a drive belt from the motor that powers the pump. When the washer goes into the spin cycle, the motor changes rotation direction and the pump works in reverse, thus flushing out the lint that may have been captured during the agitation cycle. I hope this helps.

Mar 14, 2009 | Amana Washing Machines

Not finding what you are looking for?
Whirlpool Calypso GVW9959K Top Load Washer Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...