Question about GE 25942GE2 Cordless Phone System

3 Answers

I have a Ge 25942EE4-C phone and the Cl is flashing I have looked the phone over for a button to set this can you please assist me?

Posted by on

  • katiea194 Jan 31, 2009

    I have the same annoying problem!

  • Anonymous May 07, 2009

    The CL is flashing and I find nothing in the manuel about how to solve the problem. I tried to answer a call and the noise was terrible so I believe that it does need to be set.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

We had this same problem and seeing that the Manual is incorrect, I searched GE website manuals to find a different one that at least looked like the right model and found out how to clear the CL message code. This is just a time/day setting and it is to be done by the handset, not the base unit, With the handset, press the flash key, then press #8. You should now see the time flashing in the display. Adjust the time then press the pound key. Now the day is flashing in the display. adjust the day with the up arrow, then press the pound key to finish. Your base unit will announce the time and day is set and the CL is gone.... good luck

Posted on Mar 20, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It took care of my problem! Thanks!

Posted on May 01, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If the "cl flashing" occurs after an interruption in your electricity or because your unit has been unplugged,

(1) unplug unit again from power source for 15 to 20 minutes
then,
(2) reset voice time/.day stamp as per jawolfe1962, thanks.

Posted on Sep 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

For ge 25942ee4 5.8 ghz - i can't locate instructions. need to know how to correct the day and time on main base phone.


1. Make sure the answering system is ON.
2. Press fash/answerer/call waiting button on the handset to enter answerer remote
mode.
3. Press key [8] to enter Time/Day set menu on handset.
4. To set Hour, key in [00]-[12].
5. To set Minutes, key in [00]-[59].
6. To set AM/PM, press the CALLER ID-VOLUME (5or6) button.
7. Press #PAUSE/ringer button to confrm the setting.

Sep 30, 2009 | GE 25952EE1 Cordless Phone

1 Answer

Phone not working


CL means, you need to set the MIN, HOUR, DAY/CHECK. These buttons are on the back of the unit. You need to start with MIN, then HOUR and last DAY/CHECK. Hold the MIN button down to start the set up. You release the button on the correct selection. The button is slow to react, you might need to circle around to get the correct timing to release your figure from the button. The same with the other buttons. I was very glad to stop the flashing of the CL and number of calls on the answering machine. (my house lost power and all the clocks needed to be reset, this was the biggest clue. So CL either means CLOCK or CLUE.)

Aug 28, 2009 | GE Lands Phones

1 Answer

Flashing CL


Find the button for day,and set the day, find the hour button, set the hour, and find the minute button and set the minute, then the phone will not flash CL

Feb 03, 2009 | GE Telephone pr521w

1 Answer

GE Base 25942 Flashes Cl


You can download the phone manual here:

http://www.home-electronics.net/ge/pc/IB/25942GE2_IB.pdf

It explains the time/date setting (done from the handset).

Jan 04, 2009 | GE 25942GE2 Cordless Phone System

1 Answer

Cl and 0 flashing


Your time needs set on your answering machine. If you have buttons on the top of your base, press and hold the day/check button to set the day of the week. Press and hold the hour button to set the hour. Press and hold the min button to set the min. If you don't have buttons on base, press flash button on handset to enter answerer remote mode. Press the 8 key to enter time set menu. Set hour and min using number buttons and set am/pm using caller id buttons. Press # pause to confirm the setting.

Dec 28, 2008 | Uniden Cordless Phone

2 Answers

Answering machine is flashing CL after I lost power


set the CLock by holding down the buttons on the side of the answering machine - top button for day, middle button for hour, bottom button for minute

Sep 25, 2008 | GE 25932 Cordless Phone

1 Answer

CL code


My phone was also flashing CL and the 0, after a power outage. After I set the date and time it was fixed. Press the flash button on the handset and use the caller ID buttons to set AM or PM; use the numbers to input the correct time. Then press #. Repeat for setting the day and press # again.

Aug 21, 2008 | GE 29871GE3 Digital Answering Machine

1 Answer

CL Flashing on LCD SCreen


Your time needs set on your answering machine. If you have buttons on the top of your base, press and hold the day/check button to set the day of the week. Press and hold the hour button to set the hour. Press and hold the min button to set the min. If you don't have buttons on base, press flash button on handset to enter answerer remote mode. Press the 8 key to enter time set menu. Set hour and min using number buttons and set am/pm using caller id buttons. Press # pause to confirm the setting.

May 21, 2008 | GE 27996 Twin Cordless Phone

2 Answers

GE 25942EE-C model date time stamp


I cant program my phone.The CL light flashes and I cant do anything.

May 20, 2008 | GE 25942GE2 Cordless Phone System

Not finding what you are looking for?
GE 25942GE2 Cordless Phone System Logo

1,155 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

4949 Answers

Dudeman321

Level 2 Expert

230 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...