Question about Dishwashers

1 Answer

Whirlpool dishwasher Quiet Partner II: Can you help me reset the "blinking clean light" indicator? Yes or no.

Posted by on

  • 1 more comment 
  •  Patrick Murphy
    Patrick Murphy Dec 31, 2008

    No.. didn't help.

    I left it unplugged for about 4 hours andit did the same thing.

  • Anonymous Mar 26, 2009

    MY WHIRLPOOL DISHWASHER IS BLINKING CLEAN AND WONT RUN AS WELL WE WERE WITHOUT ELECTRICITY FOR FIVE DAYS AND WHEN IT CAME BACK ON IT STILL IS BLINKING CLEAN AND WONT RUN!!:(

  • icexangl Apr 29, 2009

    We have the same problem, clean light keeps blinking and washer will not do anything. Tried the drain button, make normal sound but it will not clean or anything. Anyone know how to reset it?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

Shut down the circuit breaker that controls the dishwasher for 20 - 30 minutes then turn it back on.

Posted on Dec 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

HOW TO RESET MY DISHWASHER


All you can do is turn the power off at the power point, leave it for a few minutes and then switch the power back on.

Jan 11, 2016 | Dishwashers

1 Answer

How do you reset the control panel on a whirlpool quiet partner II dishwasher?


It should reset automatically. There could be lint buildup inside the dryer airflow inlet that is located just inside the door on the bottom. There could be lint buildup at the exhaust vent at the back on the bottom of the dryer.

Nov 09, 2015 | Whirlpool Dryers

1 Answer

Quiet partner whirlpool III gold reset


TRY A RESET CODE
Press the "Sani Rinse," "Heated Dry," "Sani Rinse" and "Heated Dry" buttons on the dishwasher's electronic control panel in quick succession to put the appliance in diagnostic mode.
Close the dishwasher door and engage the door latch.
Wait 10 seconds before pressing the "Cancel" button to reset the dishwasher.

Dec 18, 2013 | Whirlpool Gold Dishwasher with Quiet...

1 Answer

How do I reset blinking lights?


Switch the breaker off for a minute.....

Aug 26, 2012 | Dishwashers

2 Answers

Whirpool dishwasher quiet partner 2 clean light blinking wont cancel or run a cycle


Hello,

press normal heated dryer normal heated dry normal the dishwasher should reset and start. You will need to check the heater this happens because the heater normally fails. Let me know,

http://www.appliancerepairlesson.com/

Mar 07, 2011 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool Quiet partner II


ck the float / it may be stuck . / water valve may have failed . mm

Dec 07, 2009 | Dishwashers

1 Answer

Whirlpool quiet partner III. Clean light keeps flashing clean.


Had the same problem. Press the sani-rinse and heated dry button back and forth and it should reset.

Aug 29, 2009 | KitchenAid 24 in. KUDI02IR Built-in...

1 Answer

Whirlpool quiet partner 1 # DU1055XTSQ2


Read this article, it should address your problem.

http://fixitnow.com/wp/2006/03/20/whirlpool-built-dishwasher-includes-kitchenaid-and-some-kenmores-wont-start-clean-led-blinks-seven-times/

http://tclaundryrepair.com/

Feb 24, 2009 | Whirlpool 24 in. DU1100XTPS Built-in...

26 Answers

Whirlpool Quiet Partner II


press back and forth between hi-tempwash and sani rinse several times to get all lights to come on if not then press sani rinse and heated dry back and forth several times. one of though combos will start the test mode. the test mode will stop the light from blinking and you can use the dishwasher again

Nov 26, 2007 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

543 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

66302 Answers

Brad Brown

Level 3 Expert

14360 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...