Question about Audio & Video Receivers

1 Answer

I put new batteries (Duracell) in my Craig Personal cd player after listening to 1 and a 1/2 cd's the battery icon pops up. This has happened every time I use it. It it a defectice player or what? Thanks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

It's likely that the unit is using your batteries quickly due to a defect or that the unit simply uses a lot of power.

Posted on Dec 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I get my car radio unstuck from one station?


Try disconnecting the negative ground (-) cable from the battery. That will disconnect power to everything including your radio. It might reset it self when you restore power by reconnect the negative ground cable to the battery.

May 19, 2014 | Pioneer Deh-4100 Single Din Cd Player...

5 Answers

Onkyo just shuts off...


check whether any loose connection in the board of the unit.

Aug 15, 2008 | Onkyo TX-SR605 Receiver

1 Answer

I have a CD Portable radio for which I cannot find the manual, I am having a problem with the CD player. When I insert a CD and press play nothing happens. What am I doing wrong? Thank you.


1) Unit is Defective,
2) Hold Button is on.
3) Power Button is not On. (or Batteries are not in proper position or weak. Or Corrosion on Battery Contacts)
4) Dirty Lens (Clean the laser lens with swobbies gently)

-These are the only things that User can do. If this does not help, then Replacing would be better.-

Jan 29, 2009 | Audio & Video Receivers

1 Answer

I have a 2003 jeep liberty limited edition. My battery died and i replaced it and when i started up my jeep again i went to listen to a cd and it wont go to the cd menu anymore. what could be the problem?


Your Jeep has a security feature.When you replaced battery it caused the cd player to lock up. You need to contact your local Jeep dealership to obtain the security codes to unlock cd player. They usually have that information available. Good Luck

Oct 16, 2008 | Audio & Video Receivers

1 Answer

No subwoofer output


1. Try twisting the RCA plugs from CD player and see if they are not connecting right.
2. Replace the cable from the Cd player to the receiver
3. Try a different input
4. Try a different CD player

See if any of those solve your issue. Replacing the cable worked for me one time

Aug 30, 2008 | Yamaha RX-V995 Receiver

1 Answer

Number of inputs


Each CD Player has audio out put amplifier circuit and this output amp remains Mute until it receive signal to out it. While using Y-Connector, when you try to listen one player sound, other goes to Mute as its in Stop position and caused to minimize the out put of other player which is being played. That's why you listen good sound if just one is connected. If you want to connect both players at one amplifier, you need at-least 2 inputs in amplifier and since your Fisher amp has not 2 inputs, so I suggest to buy another amp equipped with 2 or more inputs. Hope this info will help you.

Aug 17, 2008 | Audio & Video Receivers

1 Answer

Kenwood KDC-MP832U display not working


I had this problem! It was the Cars Battery. Kenwoods unit's fade or go completely blank when there is little power to power the stereo. Try charging your battery or grabing a new one from a scrappy! I was all over the net looking for help but finally sorted it!

P.S. My younger brother had to do the exact thing and it worked for him as well!!!

Jul 20, 2008 | Kenwood 1080VR Receiver

1 Answer

Panasonic Receiver SA-XR25


I thought it might be heat related, so I put a small battery operated fan behind the receiver, and voila, no more clicking. I just have to invest in rechargable batteries or an electric fan.

Jun 26, 2008 | Panasonic SA-XR25 Receiver

1 Answer

Denon avr-3802


It sounds like this is one of two problems. 1) It has lost the connection to those inputs entirely. If so the solutions are rather simple. Unplug it and maybe even ground yourself. Open the receiver and check any wires going towards the inputs in question. Also check all the fuses, they should look just like a normal glass vial fuse with the two metal connections. If you can tell that the fuse is dead, find out what type of fuse it is (maybe printed in the user manual or on the fuse itself). Then replace the fuse. 2) If it has to be programed for the particular inputs then there might be a battery dead. simply begin the same way you did with the other solution and this time look for a round battery. It is most likely a 2032 and I would suggest replacing them all. To replace: If it is inset to the board note the polarity, pop it out with a screwdriver or fingers, put the new battery in the same way. If it is raised, note the polarity, remove from the connectors, push the connectors together so that they are slightly closer together than would allow a 2032 to fit passing through(so that it would be snug), and put the new battery in the same way.

Jul 07, 2007 | Denon AVR-3802 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...