Question about Panasonic TY-LA1000 Projector Lamp for PT60LC1

1 Answer

Reset lamp meter panasonic pt44lcx65

Ive changed the lamp but it says i need to reset meter....i
ve found an instruction to do that here....but it didnt work....is there a technical site that can walk me thru this

Posted by on

  • jdjdjdjdjd Feb 24, 2009

    Iam told to reset my lamp TY-LA1000-k on my tv how and what do i do to reset the lamp I put a new lamp in.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 56 Answers

Greetings!

It's been a while since I did one of these, but if I remember correctly:

- Turn on the set
- Push volume down on remote and at the same time....
- Push Split on the remote and hold both for 5 seconds

This should do it. The display should reset to "0". If not, try using the PIP button instead of the Split button. I have heard of a few sets using this sequence. Either way, the key is holding both buttons simulataneously for at least five seconds.

Good luck!
Rob

Posted on Mar 09, 2009

  • wing_guy_196 Mar 09, 2009

    Forgot to mention that on a few of these the sequence:



    - Must be performed AFTER the reset lamp message is cleared off the screen



    and/or



    The volume button on the set must be used instead of the volume button on the remote



    Sorry if there was any confusion.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the instruction for how to reset a timing on a pt56lcx16 when you replace the lamp


Turn on the projector
MENU-
OPTION-
LAMP RUNTIME-
Press and hold the ENTER button for 3 seconds.
Turn off the power.

We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

Jan 31, 2014 | Panasonic PT56LCX16 TV Lamp

Tip

Panasonic TYLA1001 Manual Lamp Replacement Instructions Models No. PT-52LCX66 /...


Panasonic TYLA1001 Manual
Lamp Replacement Instructions

Models No. PT-52LCX66 / PT-56LCX66 / PT-61LCX66
Models No. PT-52LCX16 / PT-56LCX16 / PT-61LCX16

9fe2fcd.jpg

Are you missing the Installation Instructions for your Panasonic TYLA1001 Replacement Projector Lamp?

A digital, pdf version of the TYLA1001 Lamp Replacement Instructions can be downloaded from here.

Once installed, reset the lamp timer of your Panasonic Multimedia Projection HDTV by following these steps.

I hope that helps.

on Apr 11, 2010 | Panasonic TYLA1001 TYLA1001 Projector Lamp

2 Answers

Reset lamp meter on panasonic pt 56lcx 16


Turn on the projector MENU- OPTION- LAMP RUNTIME- Press and hold the ENTER button for 3 seconds. Turn off the power.

Dec 07, 2013 | Panasonic 2 Projector Lamp

1 Answer

Where is my lcd lamp located on my panasonic rear projector tv?


How to change lamp on PT52LCX15K
Turn TV off and wait for the red light to stop blinking,then unplug it from the wall. IMPORTANT: Wait for a least a hour after turning off your TVfor the lamp to cool off. It is veryhot On a Panasonic PT52LCX15K the lamp is located under thefront panel that covers the speakers.
  1. Remove the front panel. Just grab it on both side and pull gently.
  1. TO THE RIGHT OF THE LEFT SPEAKER you will see a round locking knob on the lamp cover. Turn the knob to the left and remove the cover.
  1. Inside you will see a case with a handle on it. Pull it out and you will see the lamp assembly
  1. Remove the two screws holding the lamp assemble and remove. Use the handle.
Putting it back in just do everything in reverse. You will have to reset the lamp meter yourself.To reset the lamp hour meter:
Hold down the volume button on the TV and at the same timepress and hold the PIP (picture in picture) button on the remote. Watch the screen and you will see when it is complete. It only takes a few seconds.

Sep 11, 2010 | Panasonic 2 Projector Lamp

2 Answers

How to lamp reset in panasonic model no. PT-DW5100U (lamp model no. ET-LAD57W)


It's in the menu under "Option 2". Then look for "System Information" The lamp reset is there

Good luck

PS: Change/clean the filters too!

Aug 13, 2010 | Panasonic 2 Projector Lamp

1 Answer

After just recently replacing the bulb I am


Here is proceudre to reset lamp timer in your TV..
While pressing the VOL Down button on the projection display, hold down the PIP or SPLIT button on the remote control at same time for more than 5 seconds.
When reset procedure is complete, the screen message ' lamp time was reset to 0' will appear.
Hope this info will help you.
Thanks.

Nov 18, 2009 | Panasonic TY-LA1000 Projector Lamp for...

2 Answers

How do you reset a lamp hour meter in a panasonic TV


hold volume on TV (-) down and (0) zero on remote for five secs..

Jun 30, 2009 | Panasonic TY-LA1000 Projector Lamp for...

1 Answer

I have a panasonic model pt-52lcx15 and replaced the lamp part # ty-la1000. It works fine but I can't figure out how to reset the timer, do you have instructions for this, they weren't included with the...


Hi, I have the fix for you....EXIT out of the message telling you to reset you meter. Now you need to push the - vol (neg vol) button on you set, at the same time push the split button on your remote (very bottom of the remote is the split button with the vcr controles) You need to push these at the same time for 20 or more seconds and you will recieve a message that the metter has been reset. Exit out of that message and all should be fine. Took me about 15 minutes to get to a tech to walk me through it.

Jan 18, 2009 | Panasonic TY-LA1000 Projector Lamp for...

1 Answer

How to check for lamp life of my mitsubishi multimedia Projector xd 450u (DLP)


This should work:

How to reset the operation time meter
Plug in the power cord, switch on the projector, and
reset lamp time by pressing the (left and right arrow) and POWER buttons on the control panel simultaneously.
Important:
• If the 3 buttons was not pressed at the same time,
the lamp time may not be reset.
• Please confirm the TEMP indicator illuminates
about 2 seconds and the lamp time has been
reset.
• The projector will not turn on if you do not secure
the lamp lid.
• You must reset the operation time meter after you
replace the lamp.
• Do not reset the operation time meter unless the
lamp has been replaced.

Jul 14, 2008 | Projector Accessories

3 Answers

Set lamp timer


Jerico, If you will go on dlp lamps .com I believe they answer that question in their FAQ. You can also give them a call. Look on their site for number. All I know is that they make the whole process really easy.

Jul 11, 2008 | Panasonic TY-LA1000 Projector Lamp for...

Not finding what you are looking for?
Projector Accessories Logo

1,079 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projector Accessories Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5601 Answers

rostit

Level 3 Expert

495 Answers

ray gallant

Level 3 Expert

35999 Answers

Are you a Panasonic Projector Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...