Question about Amplifiers & Preamps

1 Answer

Balance switch for sansui au-g30x integrated amplifier

I cant seem to find anywhere where i can get a replacement balance switch as mine is well & truly broken beyond repair, can you recommend somewhere who might be able to help me??
kind regards
sam.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Finding a replacement control will probably be expensive (over $20 including shipping) so here's a cheap + dirty fix. Most people never use the balance control so losing it won't usually matter.

The control is probably labeled something like 10kohms. Take a digital multimeter and measure the value from each of the outside terminals to the center one then replace the control with two resistors with the values you just measured.

If you still want to replace it, ask over at www.audiokarma.org and somebody should be able to suggest a parts source.

Posted on Dec 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sansui AU D607 integrated amplifier. Where can I get a manual?


Service or owner?

There seems to be plenty of service ones. Just enter the model number into Google.
You might have a problem getting hold of the user.

Nov 16, 2015 | Amplifiers & Preamps

1 Answer

No output sound on one side (L) from Integrated Amplifier


Actually I think you are looking for an STK4204 MK5. I would search google for where to get one, depending where you live.

Mar 01, 2013 | Amplifiers & Preamps

1 Answer

Hi I have a Sansui Amplifier model AU-519 and the volume of this goes of quite often...only resumes when the volume knob is rotated anticlockwise and clockwise several times....is there a fix / solution to...


Sounds like it could be one of two things, either a bad soldering joint, weakend with time! Or dirt in the track of the control. This can be cleaned with Servisol Switch Cleaner (such as Video 40).

Aug 27, 2010 | Amplifiers & Preamps

1 Answer

Sansui AU-X410R Amp, at power on, lights on but no sound (surge protection click doesn't occur). Sometimes powers off for no apparent reason.


One thing you could look at is that thing that makes the click, it could be a relay and they do go wacky sometimes (hence why it shuts down). If you are lucky it will tell you (on the relay) everything you need to replace it.

Jun 11, 2010 | Amplifiers & Preamps

1 Answer

Sansui AU-7500 volume control problem - need replacement


Hi...

Is that the fancy pot with more than 6 leads..kinda square looking?

This place has some.

http://angela.com/

Rate my help if this helps...Thanks

Mar 11, 2010 | Amplifiers & Preamps

1 Answer

JVC AX-66 Integrated Amplifier seems to be muted?


You need to have a jumper between the 4 standalone jacks on the right side of the column of stereo connectors. A stereo RCA cable would work for this.

Oct 14, 2009 | JVC Amplifiers & Preamps

1 Answer

Proton 520 Integrated Amplifier with quiet left channel


Hi...
Flush all the switches and controls with De-Oxit D5 or better.
Then get back to me.
Thanks

Feb 02, 2009 | Amplifiers & Preamps

2 Answers

SANSUI AMP AU-D11-II


It is possible, but nlikely that the protection circuit is bad. More common are shorted output transistors or defective driver stage transistors. This should not be a difficult repair for anyone familiar with audio amps. Unsolder/remove Q22 and Q23 and measure the voltages at each of the 3 pads per transistor and post them here.

Thanks,
Dan

Nov 04, 2008 | Amplifiers & Preamps

1 Answer

Spares


Bass Treble,bal controls can be clened with contact cleaner.
Drive belts audio heads may be available at the sansui web site or mcm electronics.com.
GOOD LUCK
BIGRED

Apr 01, 2008 | Amplifiers & Preamps

Not finding what you are looking for?
Amplifiers & Preamps Logo

Related Topics:

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Amplifiers & Preamps Experts

 Grubhead
Grubhead

Level 3 Expert

4590 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Are you an Amplifier and Preamp Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...