Question about Webcams

1 Answer

My webcam can't be detected. what should i do?

Posted by on

  • Anonymous May 19, 2009

    This does not fix the fact that Vista will not detect the webcam. This would be assuming the web cam is properly detected by windows and the issues with .. "yahoo" which im guessing is not the issue they are having.

    "Try disconnecting the Camera from the USB port and reinstall the software program. When the program asks you to connect the camera to the USB port, do so and it should work." The problem is that is what's NOT working....

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Try disconnecting the Camera from the USB port and reinstall the software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WEBCAM NOT DETECTED


1st You download Webcam Driver.
WEBCAM NOT DETECTED
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Apr 29, 2012 | Logitech Webcam

1 Answer

Compaq built in webcam is not detected


This sounds like the webcam driver is either corrupted or disabled. Try the steps in this webcam technical support guide to restore it.

Jul 09, 2010 | Compaq AVC00-AA Webcam

1 Answer

Webcamnot detected by the driver software


Did you try the webcam program in the windows control panel? It will detect many webcams that
other webcam programs have trouble with. Also,
some cam programs need you to select your cam from a long list. All the major IM programs should have no trouble with a Logitech webcam.

Jul 03, 2009 | Logitech Webcam

1 Answer

Mionet unable to detect Lifecam 7000


A camera icon will show up at the bottom of your My Resources in MioNet. If the camera does not appear, then a manual scan is required. To scan for a new camera, go to the MioNet application, select File, then click "Scan for Cameras and new Devices…" MioNet will report any changes in the computer configuration.

If the camera isn't detected and an icon is not available, then there may be two devices interfering with a scan:

1. Built-in webcam: MioNet does not support built-in webcams. This device should be disabled in Windows Device Manager, the computer rebooted, and a new "Scan for Cameras and new Devices…" performed with the USB webcam. Once the USB webcam is detected by MioNet, the onboard webcam can be re-enabled and the computer rebooted.

2. TV tuner card: MioNet also does not support TV tuner cards. This device should be disabled in Windows Device Manager, the computer rebooted, and a new "Scan for Cameras and new Devices…" performed with the USB webcam. Once the USB webcam is detected by MioNet, the TV tuner card can be re-enabled and the computer rebooted.

3. If the camera is being used by another program, MioNet will not be able to detect it. Please confirm no other program, including the camera view in Windows control panel, is not using the camera.

May 24, 2009 | Microsoft LifeCam NX-6000 Webcam

1 Answer

Cam was working now says no webcam detected or not working properly


This could be due to updates on your computer, faulty webcam or driver.

Check the properties in devices in control panel. Troubleshoot to see if the drivers need updating and if the webcam appears as working properly.

Then you can check if the webcam is working on another machine? Does it power up?

May 09, 2009 | Logitech Webcam

1 Answer

AVEOCAP


Hai
before start using the webcam, u need to install the driver for the webcam. The PC should detect the device when u connect it to the USB or COM port. If it does'nt detect ur device is faulty.
good luck
Rabby

Jun 16, 2008 | Umax AstraPix PC100 Webcam

1 Answer

Hi dear i have zenith webcam.


hihi dear i have zenith webcam my computer is not detecting it

May 04, 2008 | D-Link DCS-5300G Network Camera

2 Answers

Webacm


first you attach the webcam..
->put driver cd into drive
->let it to autoplay and detect if possiBle or browse and find the appropriate driver... only then your web cam will be detected"new hardware found"

Apr 12, 2008 | Logitech Webcam

Not finding what you are looking for?
Webcams Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Webcams Experts

micky dee

Level 3 Expert

2630 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...