Question about Labtec 961307-0914 Webcam

1 Answer

I have a webcam(LABTEC) but I haven't got the installer cd.

I already have got the softwer from the internet,I installed the softwer but the camera is still not working.(It's says 'No camera find...') What else I can try or what else I need to make work my webcam?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Try disconnecting the Camera from the USB port and reinstall the CD software or downloaded program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I dont hace the installation cd for my labtec camera


try to google it, or go to the cams website and see if they provide an installation software for their cameras there had the same problem with my webcam, couldnt find the the installation cd for my cam, but found the installation file at this place www.softpedia.com, try it maybe it will help.

Feb 24, 2013 | Labtec 961307-0914 Webcam

1 Answer

I don,t have the drive for using this in windows 7.i searched a lot in the internet but i can,t find the correct drive for this webcam.and i also searched in the labtec internet site but there is no...


Hi. Labtec does not exist anymore, as it was bought out by Logitech. So, you're not going to find any updated drivers for Labtec devices because Logitech discontinued all of the products. Unless you have the installation CD that came with the camera and it miraculously works, you may be out of luck. Sorry.


That being said, web cams are pretty cheap these days, so you may want to upgrade anyway.


Regards,


D

Aug 21, 2011 | Labtec WebCam 961307-0914

2 Answers

Labtec webcam not working why i did every thing my computer not detecting this ****** i install all the posible drivers already i used window xp. I hate this man.


ok, uninstall all related drivers to this camera,


Now using the supplied disk install the camera software but please do not connect the camera YET, if the camera is already connected,
remove the camera and reboot,

so you installed the camera software now plug the usb camera in, it will now detect the install camera software and work.

Regards
gewiz.

Dec 05, 2009 | Labtec 961307-0914 Webcam

1 Answer

My labtec camera is connected and the green light is on. but the person cannot view my cam


Put your PC on and left click at setting; control panel;
and add hardware wizard. Just follow the instruction,
and find out if your labtec camera is configured in your O.S.(operating system - xp, 07, etc.). Click to install it. Just follow the instruction prompted by your PC. Otherwise, you can install it in your PC through a Labtec CD software driver installer. Or get connected to the internet get your download. Just type at the
search engine (Download for software driver Labtec
(961307-0914) Camera). Get your download and
install it in your PC.

Nov 25, 2009 | Labtec 961307-0914 Webcam

2 Answers

Lost installation cd for my labtec webcam,any free download sites


Here is the download page for your camera's drivers. A rule of thumb for me is to NEVER use included software/install disks when I buy hardware, you can find them on the manufacturer's website and when downloading you can more easily find different builds (for example, my printer only came with the disks to install the suite of applications, whereas the basic operational drivers were available online).
here is the download site for your webcam brand, just pick out your model, download, and install!

http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764

Jan 14, 2009 | Labtec Webcam Plus 0403

3 Answers

My instalation cd lost


i need to istall the camera to my new pc but i lost the disc could you please help me
thank you rose

Sep 25, 2008 | Labtec 961307-0914 Webcam

1 Answer

Reinstall web cam


just copy it to internet explorer :www.download.com/IOXperts-USB-WebCam-Driver/3000-2285_4-10174911.html - 62k -

Dec 09, 2007 | Labtec Webcam Pro

9 Answers

Lost cd to install labtec cam


i lost my cd how do i fix this???

Nov 02, 2007 | Labtec Webcam Plus 0403

Not finding what you are looking for?
Labtec 961307-0914 Webcam Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Labtec Webcams Experts

micky dee

Level 3 Expert

2624 Answers

Shahzad  Waseem...
Shahzad Waseem...

Level 3 Expert

746 Answers

Robin Hill
Robin Hill

Level 3 Expert

1251 Answers

Are you a Labtec Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...