Question about Intel 845GE Motherboard

2 Answers

Windows XP Pro hangs on reboot after installation

System components:
Intel D845GEBV2 motherboard with Celeron 2.4GHz CPU
(BIOS Version: RG84510A.86A.0028.P15)
512MB RAM (two 128MB 266 DDR modules)
80GB WD Hard Drive
ATI Radeon graphics card (in AGP slot and enabled)

Trying to load Windows XP Pro. The installation process appears to complete without error (formats NTFS filesystem, loads all files, selected localization settings, etc.) On reboot I see the Windows XP Pro splash screen, then the mouse cursor (arrow) and the screen stays black and it just hangs. Mouse is dead, keyboard is dead, system is hung. Any suggestions are greatly appreciated. Thanks!
Ken

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Try to boot into Safe Mode (press F5 before the splash screen) and see if it will successfully boot. If it works then it may be due to a driver issue. If you get the same result, try to reinstall the OS but totally remove the partition table before doing the installation. Specifically, remove the partition that you will be installing to and recreate it to your specifications.
You can also try to set the BIOS to fail-safe or defaults.
Hope this helps!

Posted on Dec 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 948 Answers

Try removing your AGP card and enabling the onboard graphics again. It is possible your Radeon is a 3.3v, but this board only supports 1.5v cards. Take a look at the manual at ftp://download.intel.com/support/motherboards/desktop/D845GERG2/BV2RG2_English.pdf

Posted on Dec 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I don't have board installer


You can download the motherboarddevice drivers from Intel WEB site. Select your model motherboard/device, andmake sure you select the Windows XP or Vista version of the drivers that
matches your Windows operating system. Please click on this link andselect your model motherboard : - http://downloadcenter.intel.com/default.aspx?iid=gg_support-au+home_downloadctr

Sep 09, 2011 | Intel CELERON 2.66Ghz CPU AND MOTHER BOARD...

1 Answer

How can I download absolutely free the D845GEBV2/D845PESV


You can download the motherboarddrivers from Intel WEB site. Select your model motherboard/device, and makesure you select the Windows XP or Vista version of the drivers that matchesyour Windows
operating system. Please click on this link andselect your model motherboard : - http://downloadcenter.intel.com/default.aspx?iid=gg_support-au+home_downloadctr

Apr 07, 2011 | Intel D845GEBV2 Motherboard

1 Answer

My cpu Intel D845GEBV2 / D845PESV Motherboard driver have u taken. pls send me thanks for u


You can download the motherboarddrivers from Intel WEB site. Select your model motherboard/device, and makesure you select the Windows XP or Vista version of the drivers that matchesyour Windows operating system. Please click on this link andselect your model motherboard : - http://downloadcenter.intel.com/default.aspx?iid=gg_support-au+home_downloadctr

Nov 20, 2010 | Intel D845GEBV2 Motherboard

1 Answer

I can not find the VGA driver of my computer , it is intel(R),celeron(R)


Normal 0

You can download the motherboard drivers from Intel WEB site. Select your model motherboard/device, and make sure you select the Windows XP or Vista version of the drivers that matches your Windows operating system.

Please click on this link and select your model motherboard : -

http://downloadcenter.intel.com/default.aspx?iid=gg_support-au+home_downloadctr

Oct 17, 2010 | Intel CELERON 2.80Ghz CPU AND MOTHER BOARD...

1 Answer

Where i can download Intel CELERON 2.80Ghz CPU AND MOTHER BOARD drivers i lost its cds.. plz help me urgently


You can download the motherboard drivers from Intel WEB site. Select your model motherboard/device, and make sure you select the Windows XP or Vista version of the drivers that matches your Windows operating system.

Please click on this link and select your model motherboard : -
http://downloadcenter.intel.com/default.aspx?iid=gg_support-au+home_downloadctr

Sep 20, 2010 | Intel CELERON 2.80Ghz CPU AND MOTHER BOARD...

1 Answer

Mother board is ak77 pro 133 vt8233 will not run xp proI


Hi,
The BSOD (blue screen of death) usually means that a computer component has failed. This could be a hard disc drive, a memory module, the cpu, or the motherboard. I would start by checking out the hard drive first. See if it is spinning and not making any clicking sounds. Try replacing it if you have another one. Then check memory and cpu. Some people actually like having an old computer hanging around. They install Windows 98 in it so they can play old dos games and games that don't require a blazing fast processor! Good luck...Hank

Jan 09, 2010 | Acer AOpen AK77 Pro(A) (91.89A10.104)...

2 Answers

Hi guys, I'm new in this forum and I really need some help. I have a p4vmm2 motherboard with Intel Celeron 2.0 Ghz CPU and I want to upgrade it with Intel Pentium 2.4 CPU motherboard. I have already tried...


Whenever you try to upgrade motherboard and CPU's with Windows XP, you're probably going to have to format your drive and re-install XP. When you originally install XP it detects the motherboard and IDE controlers for your hard drives and installs the drivers needed but it doesn't install all drivers for motherborads and IDE controlers. When you swap out motherboards and the system tries to fire it doesn't have drivers available for the new motherboard and can't complete the boot into windows. Every once in a while you get luck and the new and old motherboard can use the same drivers but this is very rare. So when upgrading motherboards plan on backing up your hard drive of all files you need to keep and being prepared to format and re-install windows.

May 15, 2009 | EliteGroup P4VMM2 V8.1 Motherboard

1 Answer

Problem loading XP Serve Pack 2 in Gigabyte 8I845GVM-RZ


I know this may sound mundane, but did you load the correct set of windows drivers for the Intel 845 chipset? I mistakenly loaded the Home drivers onto a unit I tried to install Pro on and I got all sorts of errors.

Mar 26, 2009 | Gigabyte GA-8I845GVM-RZ Motherboard

4 Answers

I have a toshiba L300 laptop with vista....i re installed that to XP...after that i download bios update (previous version insyde 1.3 v now 1.5v)from toshiba and installed....the setup was successfull......


I solved that problem with unpluging every kind of connectors (Usb..) Shuting completly down. Unplug the powersupply and restart the whole system. After that, go to BIOS and see the SATA Option, set to compatible and not ASHC(or whatever its called). After the BIOS Update some of my BIOS settings were changed.

Dec 07, 2008 | Intel D845GEBV2 Motherboard

3 Answers

Mouse not working after BIOS upgrade on Intel D845GRG motherboard


use usb mouse
othervise re format yours whole system low level
and re install win xp or whataver you want

Dec 14, 2007 | Computers & Internet

Not finding what you are looking for?
Intel 845GE Motherboard Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

David
David

Level 3 Expert

753 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...