Question about GE Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

Ge oven codes

I have a GE Profile gas stove/oven. It started flashing the code F2 and beeping.
The oven got extremely hot so I unplugged it. What does this code mean?Is it safe to plug my stove back in?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

F2 means your oven temp got too high. At least, that's what the control boards thinks. More than likely you have a bad oven sensor or bad wire to it or a bad connection somewhere between the board and sensor.

Posted on Dec 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Getting a PF7 code with beeping on my stove. Reset breaker, didn't fix it. Any help would be appreciated.


GE oven error code "F7" and how to fix it ' AskGene.com

www.askgene.com/.../oven...codes/ge-oven-error-code-f7-and-how-to-fi...
Jun 23, 2007 - The error code "F7" will be displayed along with a beeping sound if the ERC (Electronic ... We have a GE Spectra Oven - GAS - we keep getting F7 errorcodes and the oven will not heat. ... In my case it was the keypad.

Why is my GE Range model number JBP80SM2SS making ...

www.shopyourway.com > Manage My Life > Questions
Apr 6, 2010 - Get shopping advice from experts, friends and the community! I was boiling water on back burner of ceramic stove top GE range Model ... When anyappliance picks up an error code or starts beeping the problem that caused it ...

Jan 08, 2016 | GE Profile 30" Self-Cleaning Slide-In...

1 Answer

F2 flashing on screen of my GE Spectra oven.


Your oven temperature sensor has failed and must be replaced.

May 20, 2009 | GE Profile Spectra JGBP79 Gas Kitchen...

1 Answer

Flashes "bf"


I unplugged the stove and waited 5 minutes - I would really like to know what the code "BF" means

May 11, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

2 Answers

GE true temp oven f2


This happens every time I clean my oven. It overheats, shows the f2 light and BEEPS loudly. The only way to stop it is to turn the oven off at the breaker box, wait until it cools (usually 2-3 hours), flip the breaker back on and start the process all over again until the unit is clean. If it's not to dirty, sometimes it's easier to juat use Easy Off.
hope it helped

Jan 09, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE profile gas stove over does not work....F7 D8 on screen


spectra stove and it is beeping and reading f7 we have unplug it and replug please help me

Nov 20, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

2 Answers

F2 Code Problem


I can't take credit except searching and found this info.. I will order to see if it fixes my error messages..Tom

All, I hope that this helps everyone having this annoying problem. The problem is the F2 error that seems to come on everytime you use the oven. Well, it was driving my wife crazy, so I finally gave in, and had a GE technician come over to fix it. :) It cost me $190, with $80 for the part and $110 for the labor. Had I known what the problem was, I could have fixed it myself in 10 minutes, and only would have had to buy the part. My loss is your gain. The technician replaced the sensor, part #WB21X5301 (can find at (www.geappliances.com (http://www.geappliances.com)); cost is $76. If you open the oven door, the sensor is on the top left-hand side and is long and skinny. Instructions come with the part to replace it. Basically, you unplug the oven, take out two screws, and cut the two wires to the sensor. You then use wire nuts to connect the new sensor wires, and push the :) wires out of the oven area into the back panel. That's it. Problem fixed. Glad I could help out others!! Merry Christmas! JakeDecember 11th, 2005, 02:25 PMThanks for the information and update back on this problem you had.:)

You can also buy that same part#WB21X5301 from here, abit cheaper:
Oven sensor assembly (http://www.repairclinic.com/referral.asp?R=1265&N=252618)

May 04, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Ge gas oven/ranger xl44


The F2 is the code for the board seeing a temp higher than 600 degrees. It could be one of two things. The temp sensor is out of range, extreme high resistance. If you ohm it out it should read approx 1100 ohms at room temp. The other would be a welded bake relay on the board itself. Check the temp sensor first. If you are getting the F2 in the cleaning cycle, check the temp sensor, welded clean cycle contacts on the board or both contacts on the lock switch are closed at the same time. This is for the model posted JGBP90.

Nov 24, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

F2 error


I have the same problem... I unplug the range wait 30 seconds ...the plug it back in..usually works. Remodeling soon .. next range not GE!

Sep 09, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
GE Profile Spectra JGBP90 Gas Kitchen Range Logo

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...