Question about Pioneer Televison & Video

1 Answer

I have a model pro 107 52 inch Pioneer TV that the power will not stay on. I replaced in May 2006 what I believed to be a Model # awz5142 refurbished module convergence assy that Beyer TV repair charged me $350 plus $240 labor to install. The green light on the front of the tv goes on for about 5 to ten minutes then shuts down, I believe it is the same problem I had in May 2006. Do you have any suggestions on what I need Please call me at 248-910-4521 cell Mike Callaway

Posted by on

  • mtc_thorpe Dec 29, 2008

    Ginko



    I am pretty sure the part was a convergence part awz5142, I live in Troy Michigan 48098 can you tell me where to go to find a reputable tv repair service to get this part again



    Thanks



    mike Callaway

    248-910-4521 cell

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pioneer Master
  • 19,396 Answers

It looks like ither a psu problem, or a convergence or deflection problem, let me know where you are located.

Posted on Dec 29, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a pioneer Pro 200 and have had it for a dozen years. I have an HD in my office and the picture is so good and bright on the Pioneer I just cannot bring myself to get rid of it. The TV blinks off...


Im going to guess that if you try turning it on, sometimes you hear a "click" and nothing then the problem persists over and over until it finally turns on? If so, it's a problem with the power that "jumpstarts" the screen. Worn out capacitors on older models don't hold the necessary charge it takes to "start" the inverter that powers the screen. Once those start to go, it's usually bye bye for the tv. That is IF this is your problem. Let me know. Sometimes it makes hissing or cracking noises along with it. hope this helps!

Jun 11, 2012 | Pioneer PRO-200 60" Rear Projection...

1 Answer

Have a Pioneer pro elite 730hdi. When you try to turn it on (main power, not standby), the tv cycles from the red (standby) light with the normal click to the green light, then one second later, it cycles...


Hello,

Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Hoping this will help in solving the problem....

Aug 09, 2011 | Pioneer PRO-730HDi 64 in. Rear Projection...

2 Answers

Pioneer elite tv turns off from a pop sound and manual says-will


It is most likely the power supply. Do not try to fix this yourself. There are LETHAL voltages inside such a TV, which can persist for WEEKS after it has been turned off.

Jan 09, 2010 | Pioneer PRO-710HD 64" Rear Projection...

1 Answer

Pioneer Pro 700HD picture distortion


horizontal capacitor parts should be replaced...

Dec 31, 2009 | Pioneer PRO-700HD 64" Rear Projection...

1 Answer

Pioneer elite pro 100


My set is doing the same thing again. The last time I fixed this (4 years ago) it was a capacitor gone bad in the power supply for the 24v standby circuit. (C166)
The service manuals can be ordered directly from Pioneer Part Number ARP3014 for Pro-100 model.

Apr 10, 2008 | Pioneer PRO-100 TV

1 Answer

Panel Door for the Pioneer Elite Pro-91


I am still awaiting someone to give me advice on how to proceed, or where I can go to get help. I have contacted Star Electronics here in Suwanee and the owner, Nafiz came out and took my chassis back to the shop with him. His prices are very reasonable and he is really pleasant to work with. I hope it all works out. Please keep me informed if you have any other suggestions.

Thanks,
Mz_O

Feb 20, 2008 | Pioneer PRO-700HD 64" Rear Projection...

1 Answer

Pioneer Pro-118 won't turn on


Take off back cover. The problem power board is to the right of the board where the power plug feeds into the TV. There is a large white fuse right bend the power plug. With a meter it read ok; about 8 inches deeper into the TV on that board was the resister next to two fuses. My 4 amp 125 volt fuse did not read on my meter. After replacing, it worked fine. Check all three fuses while you're in there.

Feb 12, 2008 | Pioneer PRO-200 60" Rear Projection...

2 Answers

Replacing power board on pioneer pro 200 elite


364.00 for a new Power/deflection board through pioneer. i am including a link to their site. You may find it cheaper someplace else on line, but pioneer will have better quality parts. hope this helps. heres the link.
http://parts.pioneerelectronics.com/model.asp?modelNum=PRO200

Jan 15, 2008 | Pioneer PRO-200 60" Rear Projection...

1 Answer

Picture is green and stays green


check the convergence area for bad solder connection
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
Sony Convergence
http://www.techlore.com/blog/entry/19694/Sony-Convergence-Repair-My-Sony-TV-has-a-distorted-picture-/
http://www.techlore.com/article/19631/Sony-Convergence-Procedure/

Aug 19, 2007 | Pioneer SD-643HD5 64" Rear Projection...

2 Answers

Pioneer PRO-510HD Elite


since your tv is 6yrs old it could be that the video circuit has cold solder that needs to be resolder if that does not work then a focus on the video circuit by replacing the component there, it could be an ic or transistors or diode.if you are not a tech get one to look at your set.good luck.for further help email me at nicodhem@yahoo.com

Apr 06, 2007 | Pioneer PRO-510HD 53" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69654 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6364 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...