Question about Targus Chill Mat PA248U Laptop Cooler

1 Answer

I cant find the power switch to turn it on

Anyone know where it is supposed to be located?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Its on the USB Cord.

Posted on Mar 02, 2009

  • myjoy2go
    myjoy2go Mar 02, 2009

    The power switch is on the USB Cord.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the door switch located?


All most sure to be a faulty door light switch, The switch is on the door opening frame not the door , most times it is incased in a rubber boot, sealing it from dust. One switch to each door including the trunk.

Mar 14, 2016 | TYC Ford Taurus Cooling Fan 96 97 98 99 00...

1 Answer

I have a Tripp Lite G1010USB uninterruptible power supply that only powers the surge surge-suppressor outlets and not the battery-backup outlets. Unless the UPS is unplugged from the wall, and then i


You know they have a TWO YEAR Warranty ?

Sounds to me that it is faulty (one of the relays or switches is not providing 'through' power to the supposed 'backup' socket when the AC power is on.).

Have you followed the manual ?
available here http://www.tripplite.com/support/model/mid/G1010USB

Have you done a 'self test' ?
'To Run a Self-Test: With your UPS plugged in and turned on, press and hold the MUTE/TEST button for two seconds. Continue holding the button until the alarm beeps several times and the UPS performs a self-test. See "Results of a Self-Test" below.
Note: You can leave connected equipment on during a self-test.' see manual

If the LCD does not give you the answer then it is faulty. Seems like something went faulty on restarting your UPS in the morning.

Seems like plenty of help available from this companys' website.

Sep 13, 2014 | Tripp Lite Ups Battery Backup G1010usb

1 Answer

How can i fix my Samsung sens x05that does not power on nor charge No Signs of Charging


There could be many causes for this.

Just maybe it is a faulty power connection where the power cord from the charger/PSU enters the laptop. A common problem with laptops/notebooks is that inside power connector becomes dislodged from the motherboard and so a faulty connection ensues; once the battery has run down, the machine has no power and no way of getting power. You could test your PSU (it might be a faulty PSU) by measuring the voltage when disconnected from your PC - I don't know what it's supposed to be though. You need to do some research on your computer.
Else take it to the repair shop, which you might have to do anyway.
This link might be useful
http://www.nodevice.com/manual/newmans/SENS_X05(smpccd)zip/get21115.html#.U5Hny3lOVjo
Join one of the computer forums on the internet and see what is suggested

6.June.2014

Jun 05, 2014 | Computer System Cooling

1 Answer

Sens x05 will not power nor charge, it gives no sign of charging pls help


There could be many causes for this.

Just maybe it is a faulty power connection where the power cord from the charger/PSU enters the laptop. A common problem with laptops/notebooks is that inside power connector becomes dislodged from the motherboard and so a faulty connection ensues; once the battery has run down, the machine has no power and no way of getting power. You could test your PSU (it might be a faulty PSU) by measuring the voltage when disconnected from your PC - I don't know what it's supposed to be though. You need to do some research on your computer.
Else take it to the repair shop, which you might have to do anyway.
This link might be useful
http://www.nodevice.com/manual/newmans/SENS_X05(smpccd)zip/get21115.html#.U5Hny3lOVjo
Join one of the computer forums on the internet and see what is suggested

6.June.2014

Jun 05, 2014 | Computer System Cooling

2 Answers

My computer was in the shop for something unrelated to this problem and now that I have it back it (the cpu fan) sounds like I'm running a vacume it's that loud.


Hi Tim,

I can not say for sure that this is whats happening, but from your description, it seems logical.

After work is done on a computer, sometimes one of the ribbon (data) or power cables isn't completely secured. It can move around within the case, especially if it is transported (like back from a shop).

On occasion one of the cables comes in contact with a CPU fan (or any of the fans in a computer).If it does, the noise they make is horrendous.

Fortunately, the fix is easy. Get a flashlight and a screwdriver.
  • Open the box.
  • Switch the computer on
  • Locate the noise source if possible paying attention to the areas around the fans.
  • When you find it switch off.
  • If it was a cable just relocate it out of the way.
If this turns out not to be the problem, please comment back with more detail.

Best regards

Mike

Feb 05, 2011 | Foxconn CPU Cooler Fan CPU Fan

1 Answer

IBM projector needs a fan replaced but can't find exact model


A locked rotor indication will stop the rotation of the fan completely, however if the fan is still rotating then it wont show "locked rotor signal". If the projector is still under warranty then locate their nearest service center and get it rectified..................sodeep

Jul 31, 2009 | Computer System Cooling

3 Answers

Laptop not booting


Before anything make sure the air vents are not clogged. You can used canned air to blow out the air vents to make sure there is no buildup of dirt or dust cause that can cause overheating problems.

Look to see if the CPU fan turns on at all during the whole bootup process. The CPU fan won't run all the time but as long at its turning on at all during the bootup process then you know the fan is good.

If the fan never turns on at all and the laptop gets very warm or hot and then shuts off then the motherboard is bad cause that means to much voltage is going thru the motherboard and it can't cool down properly.

Hope this helps. If you can't physically see the fan turn on then where the cpu fan is located put your hand there and see if you can feel air flowing thru, hopefully it won't be hot air but slightly warm.

If you need any other info, let me know and I'll help you further.




May 26, 2009 | ASUS Computer System Cooling

2 Answers

Can't find reset button (590 subzero)


No such thing as a reset button. There is an on/off behind the grill on the left, but it is a switch, it doesn't trip. If it is completely dead that switch could be bad or you could have a power supply issue such as a breaker or if it isn't a dedicated circuit and ther is a tripped ground fault on the same breaker.

May 23, 2009 | Thermaltake Subzero4G Thermo-Electric...

1 Answer

Could a faulty fan cause my pc not to switch on


Normally the computer will still come on even if the fan is not there but then will sometime display cpu fan warning and then sometimes turn off depending on motherboard and so on but unless the fan wires are shorted out or something this is most likely not the case

It sounds like your power supply has gone bad
Do you hear any type of winning sound or like a discharge sound that is barely noticeable when you turn it on? You would probably almost have to put your ear right next to it to hear it or listen carefully when you press power because that sound is one of the capacitors in the power supply that has gone bad and the power supply would need to be replaced

Do you have another power supply you can use to see if it works with a different one?

Nov 25, 2008 | Intel Foxconn: Foxconn CPU Cooler For P4...

Not finding what you are looking for?
Computer System Cooling Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Targus Computer System Cooling Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

tony wahlman
tony wahlman

Level 3 Expert

779 Answers

Are you a Targus Computer System Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...