Question about Nintendo DS Console

2 Answers

DS Enchanted - cliff climbing?

Does anyone know how to get to the lights in the cliff climbing level? Thanks for any help!

Posted by on

  • 5 more comments 
  • maxigoodboy Jan 04, 2009

    hmmm have tried the suggested solution - shimmied sied ways along the cliff face, past the mushroom, bear sat on the log, rainbow bridge appeared, over the bridge, up the pole but no star! what we doing wrong? any ideas gratefully received!

  • bowman598 Jan 08, 2009

    I have tried going to the "freaky" mushroom and pushing against the wall and nothing is happening.  I have tried utilizing Giselle in the "singing" mode and have tried using the bear to push against the wall but no such luck.  What am I missing.  Thanks!

  • Anonymous Jan 11, 2009

    I need help to go up the highest cliff for enchanted nintendo DS I tried everything

  • Anonymous Feb 05, 2009

    mee 2

  • Anonymous Mar 22, 2009

    I got past the mushroom but now i'm stuck on the cliff next to a tree.

  • Anonymous May 05, 2009

    ahhh

  • Kimberley Noel
    Kimberley Noel Feb 01, 2016

    Helphelp

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

U have 2 go 2 the ugly mushroom and face the wall FURTHEST to tyhe hedge and just press RIGHT on ur ds and Giselle should shimmy i guess thats wat they call it?.

Posted on Feb 05, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

All you have to do is go to were the freaky mushroom is push against the wall and you carry on going then you slide up the pole the way you do when you are on the cliff then you jump and grab onto the a werid thing coming out from the cliffs you swing to each thing and keep going then go to the big star and your there!!!!!!

Posted on Dec 30, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you use the Bluetooth headset with the Xbox 360


I use Bluetooth headsets with my Xbox360 but before u can do that u need to purchase the Bluetooth transmitter that plugs into ur unit.

Nov 27, 2014 | Video Game Consoles & Games

1 Answer

Level 1 cheat codes


You have come to the wrong place to get those!

Jun 04, 2014 | Video Game Consoles & Games

1 Answer

Pogo games wont let me in rooms


there are a few things that could be wrong. your java is out of date, ur browser is out of date, the rooms are private or you need to restart your computer.

Mar 10, 2012 | Video Game Consoles & Games

30 Answers

My sons leapPad screen is cracked can i get it fixed or do i have to buy a new one


Hi, you can purchase on amazon Amazon com leappad screen replacement If can't find exact part, contact any vendor (probably someone can provide parts) Hope this was helpful.

Dec 27, 2011 | Video Game Consoles & Games

2 Answers

Can't signing in Fifa 09 PC


Thanks for choosing fixya.
try this one
X8MM-RWM9-FIFA-KFLT-FIFA
VXQY-X83P-DF78-HDFV-CRLD
QK7F-BDJU-RNUM-WRNL-RRLD
dont know which one is right..

Apr 02, 2009 | Video Game Consoles & Games

5 Answers

Sys_no_graphics


for vista users and x64 users you need to right click the shortcut and select compatibility set the compatibility to windows xp and under settings check run in 640x480 screen resolution then ok back to the desktop. once the game lauches you can change the res back to whatever you want ok hope this helps GRUBBTEKK FOREVER

Jan 08, 2009 | Video Game Consoles & Games

10 Answers

PS3 cant go online with Belkin N1 wireless router


I have exactly the same issue as some of you above. As soon as I start my PS3 I manage to log onto the network for anywhere between 2 seconds and 2 minutes before I get the dreaded 80710102 error and have to reboot the PS3 to reconnect. I wrote to Belkin tech support and got the following reply... I Haven't tried it yet so don't know if it really works but thought I'd post it up here in case it helps anyone else out...

Hi Antony,

Thank you for contacting Belkin Technical Support.

We understand that the router does not support PS3. We apologize for the inconvenience caused.

A) To isolate the problem, please follow the steps given below to update the firmware and configure the router:

We recommend that you update the firmware from a computer that is connected to the router with an ethernet cable.

Please download only the relevant firmware on the router from the link given below. The firmware file would be according to the router version:

http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8635uk4A&aid=14489&scid=0

and save it to the computer.

- To update the firmware, log on to the router`s web interface by typing in http://192.168.2.1 in the address bar of the browser. The computer should be
connected to the router with an ethernet cable.
Note: If you have changed your Router’s IP address, use that IP address.
- By default, the password is blank. Click the "Submit" button.
- Click on "Firmware Upgrade" under the option "Utilities".
- Click on “Browse” and select the bin file that you have downloaded.
- Click on “update” and follow the wizard.
- After updating the firmware, restore the router to factory defaults by clicking on "Restore Factory Defaults" under "Utilities".
- Reconfigure the router.

Please follow the steps given below for configuring the router:

- Disconnect the computer from your Modem provided by your "Internet Service Provider" (ISP) if it is connected to the computer.

- Reset the router to "Factory Defaults". The reset button is found at the back of the router. The reset procedure is,

- Unplug the power cable and then plug it back again. Wait for 5 seconds.
- Locate the reset button (inside a hole) at the back of the router.
- Hold down the reset button till the power-light turns solid, and then release it.

- Connect the router to either the telephone line or the filter.

- Connect the computer to port number 1 of the router.

- Make sure the corresponding lights are lit. The telephone light should be ON and solid.

- Make sure your computer has a valid IP address by following the steps given below.

1. Click on “Start” -> “Run” -> and type “CMD” and click “OK”.
2. Type “ipconfig” in the black window and check the IP address.
3. It should be in the range of 192.168.2.x, where “x” ranges from 2 to 254.

- If it is not a valid IP Address, please assign a static IP address, "Subnet Mask", “Default Gateway" and "DNS Addresses" in the computer by referring to the link below.

http://web.belkin.com/support/kb/kb.asp?a=2824

- Please reset the Internet Explorer browser settings by following the steps below.

- Open Internet Explorer. Click on “Tools” -> “Internet Options”.
- Under the General tab, click on “Delete Files” under “Temporary
Internet Files” and select "Delete all Offline content" box.
- Click on “Clear History”.
- Under the Connections tab, select “Never Dial a Connection” and
click on “LAN settings”. Uncheck all the options and click on “OK”.
- Under the Advanced tab, click on “Restore Defaults”.
- Click on “Apply” and then “OK”.

- Log on to router setup page by typing “192.168.2.1” in the address bar of the browser. By default the password is blank.

- On the left under “Internet WAN”, click on the option "Connection Type".

- Select “PPPOA”, (If it is ADSL)/ PPPOE (If it is DSL) and click on “next”.

- Type in the user-name and password and then re-type the password given to you by your ISP. Make sure you type in the full user-name.
For Example, the format for the User-name should be "yourusername@yourISP.com or .net"

- Also confirm the settings of “VPI/VCI”, “Encapsulation” values from your Internet Service Provider (ISP) and configure the same.

- Change the “MTU” to “1400”.

- Click on “Apply Changes” button at the bottom. Wait till it saves the data.

- Click on Home on the right top corner and then click on the "Connect" button. You should be able to go online.

B) Configuration of PS3:

Please contact Sony and assign static IP address and DNS on the PS3. The static IP address should be assigned in the range of the router. For example: 192.168.2.200. The IP address you assign should not be used by any other device on the network. Please confirm the ports to be opened for the PS3 from Sony.

1) Please follow the instructions given below to forward the port numbers for PS3 on the router:

- Please open the Internet Explorer and in the address bar type in "192.168.2.1" and "Enter". The computer should be connected to the router with an ethernet cable.
- Leave the password blank and click on "submit".
- Click on "Virtual server" under the "Firewall".
- Enter the port number under "Inbound port" & "Private port".
- Enter the Static IP address of the PS3 under the "Private IP address".
- Check the "Enable" box and click on "Apply changes".

2) Please follow the instructions given below to enable UpnP on the router:

- Log on to the router web interface at http://192.168.2.1
- By default, the password is blank.
- Click on System setting under "Utilities".
- Against the heading "UPNP Enabling", choose "Enable".
- Click on "Apply changes".

Note: The NAT feature on the router is enabled by default.

If the problem persists, please get back to us with the following information:

1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or Static).
2. Name of the Internet service provider (ISP).
3. Version number of the router. You would find the version number on the bottom of the device. It would be a number in a series of thousands with a prefix “ver.”. Please confirm if the router is F5D8635?
4. Using the router, if the connection is stable on all the wired and wireless computers?
5. If the PS3 works fine with other networks?
6. When does the error come up? If it comes up for both, CAT5 and CAT6 cables?

Dec 06, 2007 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?
Nintendo DS Console Logo

Related Topics:

479 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Bee Santiago

Level 2 Expert

268 Answers

Raj Patel

Level 3 Expert

891 Answers

phil

Level 2 Expert

567 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...