Kinivo bth220 wont link

try a converter box that allows multiple devices

Plug the phone into your computer and load up itunes on the computer click on your phone.

Click on the button that says Restore iPhone. It make take a little while to accomplish.

replace the battery and see if that does it.If it does not replace the charger. Retain the old battery in case the charger is faulty

The batteries won't charge. You might want to google around for replacement batteries.

First I'd try a factory reset. PRess the +, - and multifunction button for 6 seconds until the blue light flashes and it shuts off. When you turn them on next, it's in pairing mode and try again.

not likely

Are you using 2.4 Giga Hertz and do you also use wireless Lan with your computers? they might be interferring with each other. Also phone base may have optional channel settings , If it is the same frequency as th ewireless lan it won't work.

Go to kinivo.com,click support,click downloads,under audio info on how to pair with computer and user manuals.No mention of drivers but you can search on web for bluetooth drivers for the windows version you have.

Can you confirm if you are able to put the BTH220 headphones in pairing mode. Please try the following steps and see if works:

1. Make sure that the headphones are fully charged.
   
2. Switch off the headphones.
   
3. Put the headphones in pairing mode by pressing the MFB button (center) for 7-10 secs till you see the red and blue LED blinking alternatively. Please do not leave the button as soon as blue LED appears.
   
4. Follow the operating instruction of your Bluetooth device to start the pairing process.
   

Try placing the phone in a sealed ziplock bag of uncooked rice, without the battery, to try to draw out any remaining moisture in the phone. Try using again after a day or so.

gthis is a particularly finicky phone for data exchange - though I can fairly guarantee you can get files off the phone, uploading to it is another matter... You might need to find some additional software to access the filesystem of your phone as well. Either an early version of bitpim (7.x works) or qpst (I found qpst easier but its hard to find. If you need, I can send it) I had trouble getting my machine to see the phone at first, as it required some adjusting the hardware in the device manager. Is your cable futuredial or curitel?


Here is a link to a tutorial for dowloading pics:

http://tutorials.thephonemall.net/aud8910pic.htm


Also The best place I have found for this type of information is Howardforums -The official 8910 Info thread: http://www.howardforums.com/showthread.php?t=546903

Peruse these and if you are still stuck, let me know where in the process.