Does anyone know of a website that carries parts for the fahrenheat lfp6152e. My on/off switch was hard to turn on and off, and now is broken. I hate to get rid of it, because of a small part. Any Help???? Thanks
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Greetings, I have the same problem. There is a one inch square diode with 5-prong connections held on the control end by a screw on the unit's back. That's where my burning smell and very hot area were located. Call Carrol Apl. 1-800-654-3545. They have the diode for $9 + $9.95 postage. Matt who works there knows the part. Problem must be widespread - China Mfr.= Garbage products and No US Jobs.
This is for the LFP6152E electric heater. I called tech support (800.642.HEAT), and explained the problem. I was told it was a diode that went bad, and they're sending me a repair kit. I guess I'll keep this number handy for the next few years.
You need a meter, it will be hard without this! If you have 220v in the wall, then think of it like this; each wire is 120v. Test to each other, you get 220v. The thermostat is a double pole, you said. So think of it like this, its an adjustable temperature controlled switch that lets electricity through at the temp. you set it at. If you have 120v from one wire connected to one end of the element, and the other 120v connected to the other end of the element, then it will work. DO NOT CONNECT THE 120V TOGETHER. IT MUST GO THROUGH THE ELEMENT FIRST. The thermostat should be between the power from the wall and the element, to control the temperature.