Question about RCA HD52W59 HDTV Projection Television

1 Answer

Hd52w59 - Me again....

I thought I e-mailed you last Sunday but I don't find anything. Okay, here is the deal my husband replaced the fuse for the 5th time and this time he soldered the flyback, last Friday. Worked all weekend went to put the cover back on Sunday afternoon. And it started doing it thing of kicking off and on with no picture. We tried resoldering the flyback again and we still can't get any power. Please help I just hate to ditch this TV. It has to be fixable. I'm not willing to give up.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,030 Answers

Sorry havent got back got some personal issue going on. So its cycling off. my fist instinct is to check the ribbion cables that go between boards. and most connectors. theres a cable that runs from the back green booard to the front center crt board in the front. this could be a problem. does the set make any noises?

Posted on Dec 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rca hd52w59 3d screen colors are seroperated no convergence


step by step instructions are avalable in the tips and tricks section of this website.

May 29, 2009 | RCA HD52W59 HDTV Projection Television

1 Answer

Rca hd52w59 3d screen colors are seroperated no convergence


If you replace just the fl231 it will blow again. You will need to replace the FL231,DL231 and CP230. You can get the parts at the following link with free instructions with pictures total cost is about 12.00 shipping is free. the parts are all listed under the RCA parts category.
http://servicemanuals.vstore.ca/

May 28, 2009 | RCA HD52W59 HDTV Projection Television

1 Answer

Flyback


You can substitute a 1 amp PICO (pronounced peeko) fuse and it will work just fine. You should be able to order them anywhere. Let me know if I can be of further assistance

Dec 10, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

Okay let me know what you think


the flyback transformer is the large black component simalar looking to a disrtibitor of a car it has a large red wire coming out of top and a black wire. On the bottom of the board it has about 10 pins arranged in a circle. this is flyback is located adjacent to the fuse.

Dec 07, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

RCA HD52W59 wave


OK those are the correct fuses one in middle does cause lost of convergence FL231,recheck second ribbon connector, make sure it is in correctly also ck cp 150 it will be a green and gold writing on capacitor 2200uf 16v ,see if it is bubbled on top if so replace it and 2 other caps 220uf 35v,what you are saying about it waving could be a big capacitor on small AC board where ac fuse and cord plugs into ck them .Let me know if you need more help . Resolder all connection pinns on flyback.

Dec 03, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

Trying to fix fuse on convergence problem


nice obsrervation! lead free solder this half circle is it directly under the big black componet with the red wire. i not familer with the notation cad. but the circle is charteristic of flyback. This is the common point that cause the fl231 fuse to blow.i would suggest removing the solder with a ****** or wick the clean and reappy solder when you replace fuse. always look around for bad connections like this. lead free is really become a problem with rca

Nov 23, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

Convergence


you need to have the conversion chips replaced , this is a pretty common repair and i would say it is definately worth the fix, some repair shops will come and fix it within a half hour to an hour depending on the difficulty in taking out the old part and or putting in the new

Oct 07, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

HD52W59 Convergence problem


DId you solder the flyback transformer connections..... This is the main reason these fuses fail. THe flyback is the big black component next to the fuse. poor solder connection cause oscillations.. this fuse is only .4 amps whish dosent stand up to that well.. resolder these pins on the flyback.... the first time i replaced this fuse i failed to solder played well for 2 days then came back blown again

Jun 10, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

Rca hd52w59 convergence?


Before you go and buy parts it might be worth your time to check the convergence power supply fuse. It's located in the back of the TV just to the right of a large black component with 2 red wires coming off of the top. This is the flyback transformer. Just to the right of the flyback you should see three fuseable links that look like chicklet's gum. The one that may have fried is the one in the middle, it's a 400mA 125V fuseable link. Hopefully thats all your problem is.

Apr 28, 2008 | RCA HD52W59 HDTV Projection Television

2 Answers

Convergence??


e-mail me at networks@q.com and get me the chassis number see in the back of your tv under model number maybe chassis number

Apr 17, 2008 | RCA HD52W59 HDTV Projection Television

Not finding what you are looking for?
RCA HD52W59 HDTV Projection Television Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...