Question about Hampton Bay 46056 Callaway II Ceiling Fan

Open Question

Hampton bay Callaway fan: Fan does not work, Light works ok.

On my Hampton Bay Callaway fan, model 390-050, the remote control works OK for the light, but the fan does not respond. I can hear the click of a solonoid switch when I try to change fan direction, but there is no motor sound, and the fan doesn't move. Is this a reciever issue? A motor issue? I have a second identical fan in the same room, and it works just fine.

Posted by on

6 Suggested Answers

  • 157 Answers

SOURCE: hampton bay fan, wall mount remote control

Hello burrow31. There maybe a switch located on the fan stating 'remote/manual'. Check your manual. Remove the battiers in your remote and short out the battery contact terminals. Reinstall the battiers, start the fan and after fan has reached set speed press & hold fan speed button for one second. Still no speed change contact the Mgfr. with model & serial #.

Posted on Oct 13, 2008

landsend
  • 1066 Answers

SOURCE: Broken glass cover for Hampton Bay Cruiser ceiling fan.

go to Home Depot, not only do they have replacements, but they can order for you what you need.  Hampton Bay is the Home Depot brand.

Posted on Mar 31, 2009

  • 75 Answers

SOURCE: Hampton Bay 60" Brookedale fan remote not working

The Remote (TRANSMITTER) control AND the RECEIVER must both be set to the same CODE in order for the REMOTE to operate the fan.
!!WARNING!! YOU ARE ABOUT TO ENTER HIGH VOLTAGE ELECTRICITY ZONE!!
The RECEIVER is located in the CANOPY, the part of the fan assembly next to the ceiling which is also called the Hanger Bracket.
At the bottom of the Canopy you will see what looks like a large flat washer. Rotate the washer counter-clock wise to release it.
Then rotate the Canopy counter-clock wise to release and lower it. You will see the RECEIVER, which will have a short antenna at one end, tucked in among the electrical wire and bracket. Simply pull the RECEIVER out and you will see the CODE switches. Remember to set both devices to the same CODE.
Good luck. :)

Posted on Apr 26, 2009

  • 26 Answers

SOURCE: Hampton Bay 52 In. Clarington. How do I reverse the fan?

Try these two: 1) look for a small switch up near the light area on the dark-colored area of the fan. If a switch is there, then simply flip the switch to the other position; 2) if you have a remote control for the fan, the reverse mode may appear on the remote control. Hope this helps.

Posted on May 19, 2009

  • 3 Answers

SOURCE: Lost Instructions for Hampton Bay remote control 838956

Go to www.kingoffans.com and follow the site. They are the makers of Hampton Bay.

Posted on May 24, 2009

  • 197 Answers

SOURCE: New Hampton Bay ceiling fans spin too slow

Slow spinning of the fan might be caused by a low voltage. Is there any way you can measure the voltage, and if the wires are properly connected, check for any loose wiring or rust in between connections. Maybe the breaker that supplies power to the fans has a loose connections inside, try putting a new breaker of same rated current. Check if those three fans are connected to the same breaker. Breaker can go bad from the inside not doing a proper connection and supplying a low voltage, this might be causing the slow spinning of the fan. Second the black box in the space with all the wires is called the capacitor.

Posted on Mar 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Remote does not work. Have relaced remote and receiver. Fan and light turn on and off at any time by themself!!


Change the frequency settings. Your neighbor's fan is probably on the same setting you have now. If you didn't have problems before you put in the new receiver, change to original settings.

Aug 24, 2015 | Hampton Bay 46056 Callaway II Ceiling Fan

1 Answer

I have a Hampton Bay Windward II ceiling fan. Fan works fine but fluorescent light doesn't. Have done some troubleshooting. Obviously 120V input is OK otherwise fan wouldn't work. Wires to the...


sounds like there is a lose or broken conection from were the feed to the balast slits from the main fan conection try rewireing from the live imput to the balast see if that solves it.

Jul 30, 2011 | Hampton Bay 46056 Callaway II Ceiling Fan

1 Answer

Light on my Hampton Bay Ceiling fan will not turn off with the remote control. Remote works perfect with the fan - everything OK there - light is stuck On and will not turn off. Not connected to a wall...


Hi Bill,

I had and have the same problem you do. Miserable experience working with Hampton Bay. Terrible customer service. I bought an overly expensive replacement receiver from them to fix the problem and received a broken down used receiver that didn't work. Now they're going to charge me my S&H to fix their own mistake again. I hate this company.

Dec 14, 2009 | Hammacher Schlemmer Fans

1 Answer

LIGHT AND FAN ARE NOT WORKING. HAMPTON BAY LIGHT IS NOT WORKING


Could be a loose wire up inside the fan. I would be very careful in its use. Might I suggest getting an electrician in to resolve this issue. You do not want to battle a fire over a fan light issue.

Aug 28, 2009 | Hunter Ceiling Fan Light Remote Control

1 Answer

Remote controlled ceiling fan


unplug the fan then remove the batteries from the remote then plug the fan back in and, reinstall the batteries; this resets the fan control

Apr 22, 2009 | Hampton Bay 24002 Ceiling Fan

3 Answers

Have a Hampton Bay ceiling fan that doesn't work.


I'm pretty sure that home depot does sell remotes for that brand, although you may have to buy a new receiver to go with it. Otherwise try a lighting store near where you live. They seem to be able to order things like that.

Jan 09, 2009 | Hampton Bay 52 In. White Redington...

2 Answers

Hampton Bay Classic Collection 52" remote ceiling light/fan


rechecked wiring, but blue with blue, white with white, etc., now lights work with remote,but fan only works with wall switch - so why doesn't fan work with remote,if lights work the remote & receiver must be ok?

May 30, 2008 | Hampton Bay 52 In. White Redington...

1 Answer

Remote


If the fan is not responding to the remote. Then it is the controller inside the fan. To order a replacement part contact "King of Fans" who owns the warrenty for Hampton Bay. The number is 800.749.3267 for about 43.00. Hope this helps.

Mar 02, 2008 | Hampton Bay 46056 Callaway II Ceiling Fan

1 Answer

Hampton Bay 46056 fan


I have three Hampton Bay Ceiling fans with remotes for eight years. I doesn't help when a neighbor buys the same make and model. So, I had to come up with a different code for mine. I had to change the code for the remote and match it with the code in the fan. To change the code in the fan, that depends on the type of fan you have, some you would need to look on top of the fan and use a skinny stick to change the code, other's you would need to take the light fixture down to get to the controller box to change the code. I have both types, this is how know. PS. if ever, which will happen, if the fan doesn't respond to the remote then you would need to replace the controller inside the fan. Here's the warrenty no. 800.749.3267 for replacement.

Dec 24, 2007 | Hampton Bay 46056 Callaway II Ceiling Fan

2 Answers

Fan works but no light


Your receiver is shot and must be replaced. This is a small black or grey box two inches by four located under the cieling mount cover.

good luck---------------tomtaso

Dec 14, 2007 | Hampton Bay 46056 Callaway II Ceiling Fan

Not finding what you are looking for?
Hampton Bay 46056 Callaway II Ceiling Fan Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hampton Bay Fans Experts

Steve

Level 3 Expert

3287 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Hampton Bay Fan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...