Question about TruTech Clock Radio

1 Answer

Standby mode I need instructions to get to the standby mode. All settings require starting in the standby mode, but we are not told how to get there. Please reply to my email. Thank you, V. franklin

Posted by on

  • oled32 May 11, 2010

    You are evidently of no help. What you need to do is re-write your instruction booklet. 


    For every setting, the booklet says "must be in standby mode", but nowhere in the 


    booklet does it tell you how to get to the standby mode.


    Now, surely one must not purchase an assistance plan to fix a non-problem, just the


    omitting of what should most certainly be included in the instructions.


    Please have a pow-wow, see if any one in your employ knows how to get this radio


    into standby mode.


    Thanks,


    V. Franklin

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

There are three modes — standby mode, radio mode or CD mode. To enter CD mode, press the power button and then the CD button. To enter radio mode, press the power button and then the radio button. To enter standby mode, press the power button.
If you're in standby mode and press the time set button, the clock digits will blink. If they don't blink, you aren't in standby mode.

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Setting clock on Sylvania SCR4986


This is what i found:
Clock Setting
The clock can be only set while the unit is in standby mode
1. While the unit is in standby mode, press the TIME_SET button into clock setting. The LED
display will start flashing, press REV/DOWN or FF/UP to select 12h display or 24h display.
Confirm your setting by press TIME_SET again
2. While the unit is in standby mode, press and hold the TIME_SET button for 2-3 seconds, the
hours will start flashing, press REV/DOWN or FF/UP to set the current hour, press the
TIME_SET button to confirm the setting, then the minutes will start flashing, press
REV/DOWN or FF/UP to set the current minutes, press the TIME_SET again to confirm all
setting. The time is now set

Drew.

Jan 14, 2015 | Sylvania Clock Radios

1 Answer

Stuck on standby radio


Here's a pic of the instructions.15795681-9c25-4946-890f-9cbcf889a695.jpg

Dec 26, 2013 | Clock Radios

1 Answer

Why does my sandstrom S9DABI12 DAB radio power down after around 20 minutes operation. It is not the sleep setting.


The sticker on this one says:
"The latest Eco-friendly technology will switch the product to standby mode when the volume is close to mute or left idle for 20 minutes. The product can be reactivated by pressing the "Standby" button".

Not the greatest of ideas.

Sep 03, 2013 | Clock Radios

1 Answer

Lost instructions for LOGIK LCRIP12 Portable Clock Radio


1. In AUX mode press and hold the SNOOZE/SLEEP button an then press the SNOOZE/SLEEP button to select the 12 or 24 hour time format in the display. Press and hold the SNOOZE/SLEEP button or wait 5 seconds and the time format will default to your latest time format selection and the time format will be confirmed.

2. In standby mode press the TIME button. The hour digits will flash in the display.

3. Press the <--- ---> buttons to adjust the hour digits and then press the TIME button to adjust the minutes.

4. Repeat step 3 for the minute digits and then press TIME button to confirm the clock setting.

Hope this helps
Cole.
colecats28@gmail

Mar 31, 2013 | Clock Radios

1 Answer

How to set clock on the teac sr-l100 just bought at yard sale, no info book. thanks d


The "set time" button on my SR-L100 is located inside the CD compartment. To set the time the unit needs to be in the standby mode. Press and hold the set time button until the time blinks, then use the tuning/clock adj. dial to set it. Hope this helps!

To set the alarm on the TEAC SLR 100:
Be sure the radio is set to off or standby.
Hold down the BUTTON for the alarm you wish to set (#1 or #2) until the TIME ON THE DISPLAY begins flashing. Use the TUNER/CLOCKSET DIAL to change the display to the time you wish the alarm to go off. pRESS THE ALARM BUTTON BRIEFLY TO RETURN TO NORMAL OPERATION.


May 28, 2011 | Teac SRL50 Clock Radio

1 Answer

Matsui Radio Alarm CDCR200 set the clock time, lost instructions


Hold CLOCK SET button down, press HOURS and MINUTES until you get the right time, release CLOCK SET button. This radio alarm unhelpful calls the ON/OFF button "STANDBY"! To turn it on, press the STANDBY button so the standby light is on!

Feb 21, 2010 | Clock Radios

1 Answer

How do i set time for an Accurian 40-141 iPod Alarm Clock with Radio?


SETTING THE CLOCK TIME: 1. In standby mode, press and hold MODE to enter the clock time setting mode. 2. Press |<< TUNE/SKIP >>| to switch between 12-hour and 24-hour display. Press MODE to confirm the selection. The digits flash. 3. Press or hold |<< TUNE/SKIP >>| to set the hour and minute. Press MODE to confirm.

Dec 21, 2009 | Clock Radios

1 Answer

How do I get to standby mode?


There are three modes — standby mode, radio mode or CD mode. To enter CD mode, press the power button and then the CD button. To enter radio mode, press the power button and then the radio button. To enter standby mode, press the power button. 
If you're in standby mode and press the time set button, the clock digits will blink. If they don't blink, you aren't in standby mode.

Dec 28, 2008 | TruTech Clock Radio

1 Answer

Reset cd clock radio? (manual missing)


Make sure the clock is in standby mode, as opposed to playback mode. Press time set button — the clock digits will blink. If they don't, you're in playback mode. Press the hour button to adjust the hour. Press the minute button to adjust the minute. Press time set button to confirm the time.

Sep 30, 2008 | TruTech Clock Radio

3 Answers

TEAC SRL100 Set clock


The "set time" button on my SR-L100 is located inside the CD compartment. To set the time the unit needs to be in the standby mode. Press and hold the set time button until the time blinks, then use the tuning/clock adj. dial to set it. Hope this helps! Ted

May 26, 2008 | Teac SRL50 Clock Radio

Not finding what you are looking for?
TruTech  Clock Radio Logo

Related Topics:

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top TruTech Clock Radios Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

Gyula Lacz

Level 3 Expert

482 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Are you a TruTech Clock Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...