Question about HP Photosmart 3310 Printer
The error code 0x....... states IDS (Ink Delivery System) failure.Its an Hardware issue with the printer.
This problem could be resolved by resetting the printer.
POWER DRAIN:-Turn off the printer, Unplug the power cable from printer and from the wall outlet.Press and hold ON button for 30-60 seconds.
PARTIAL RESET:-Unplug the printer power cable while its ON, press and hold # and 3 button and connect the Power cord while holding.Wait until the ON light flashes, then release the buttons.
----(for below reset cartridges must be removed out)---------
SEMI_FULL RESET:-Remove the ink cartridges, Unplug the printer power cable while its ON, press and hold # and 6 button and connect the Power cord while holding.Wait until the ON light flashes,or wait for 20 seconds,hen release the button.If the printer goes off don't worry release the button and Push the ON button.
FULL NVM RESET:-Take the Ink Cartridges out, Unplug the printer power cable while its ON, press and hold OK and CANCEL button and connect the Power cord while holding the buttons.keep Holding the buttons until the printer goes off ,release the button and Push the ON button.
(Notes - resets will take a while)
Posted on Dec 29, 2008
Tips for a great answer:
Oct 14, 2014 | Canon Printers & Copiers
Sep 15, 2013 | Zebra ZXP Series 8 Thermal Card Printer
Jan 31, 2010 | HP Photosmart 3310 Printer
Apr 29, 2009 | Printers & Copiers
Apr 15, 2009 | Sharp AR-BC320 All-In-One Led Printer
Apr 10, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...
659 people viewed this question
Usually answered in minutes!