Question about Kodak EasyShare Z710 Digital Camera
Try NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.
Posted on Oct 26, 2012
SOURCE: Problem loading maps to ubs card
You may need to install the USB drivers from the CD that came with your unit in the box. Just load it up in windows. Manual will tell you how to do this, or you could Google the correct driver. If your i3 is recognised correctly, it will be shown in your task bar when you click on the USB icon...
Posted on Aug 08, 2007
SOURCE: kodak m883 will not charge.
If you just got this camera and the battery won't charge right out of the box you have a few options. You could have the battery replaced by Kodak, and the battery model # is
KLIC-7006. You are most likely within your return/ exchange period, and you could just bring the camera back to the retailer and exchange it for a new one. Unfortunately with the number of camera's the manufacturer makes they do sometimes produce a defective product. Your camera not charging could be due to a bad battery, or it could be due to a problem in the camera.
Go Ahead. Use Us.
Posted on May 09, 2008
Here are few steps that you can try
>> Is the camera detected at all by the computer? Do you see the USB Mass storage device connected icon similar to one below in the system tray?
If YES then do you see the new drive letter in my computer?
If NO then right click on "My computer"--> Properties --> Hardware Tab --> Device Manager
With your camera connected to the USB, do you see any exclamation (!) or red cross (X) on any of the devices? Especially below the USB Serial Bus controller? ... If yes then right click on the device and choose uninstall. Now, disconnect and reconnect the camera to the USB and see if it works now.
>> If the above steps do not work then ... Are there any other USB devices connected to your computer..like pendrive or external HDD? If yes then try swapping the ports with camera.
>> When did the camera work with your computer for the last time? Did you make any changes like hardware or software installations/uninstallations on your computer?
Please let me know the answers after you perform the above steps..
Hope this helps .. All the best :)
Please do rate the solution
Thanks and Regards,
Posted on Apr 09, 2009
Not really a solution but I had the same problem today with my new Zennox, both on my new computer running Windows 7 and the old one running XP. I ditched the connecting USB cable provided and used one of my own instead. It now works perfectly. Maybe there was a bad batch of USB cables.
Posted on Jul 21, 2010
Hi usually reading my TIP here fixes most commn USB issues
Failure after following the advice there is usually related to a broken or worn USB port or on occasion especially with printers you may have installed the same printer more than once.
If it is too many printers installed then just uninstal them one by one until they are ALL gone then shut down and restart and install just the ONE time only..
Posted on Sep 12, 2010
Tips for a great answer:
Sep 03, 2012 | Fuji FinePix S5200 / S5600 Digital Camera
May 06, 2012 | Kodak Easyshare C182 12MP Digital Camera
Mar 18, 2012 | Kodak Digital Cameras
Aug 14, 2011 | Kodak C195 Digital Camera
Aug 12, 2011 | Kodak EasyShare C143 Digital Camera
Aug 17, 2009 | Digital Cameras
May 27, 2009 | Panasonic Lumix DMC-TZ1 Digital Camera
Mar 09, 2009 | Kodak EasyShare C875 Digital Camera
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: