Question about JVC TM-A13SUW TV

2 Answers

JVC AV-26BM4 HI Have a problem with this model, power indicator is lit intially from plugging in, will not power up when power button pushed, any ideas as to where to look for the culprit, I suspician its in the power switching & relay ckt, not sure what exactly, I have no schematic, any help would be appreciated.

Posted by on

  • Mark Moore May 12, 2007

    Ok, will try these things and let you know.

    Thanks!

    Mark

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

JVC AV-26BM4,
set comes with white line on screen?
mhickeyjr@aol.com

Posted on Jun 01, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 49 Answers

Replaced the capacitors(electrolytic) in the primary area of ps.visually check for dried up. also replace the starting resistors in primary ps common values are 100k to 820k .hope this help u....

Posted on May 09, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix my Jvc the screen won't power on. When I reset it the lights on the buttons light up...but shut off right away. It has power because the red light on the bottom left corner stays lit.


JVC LT-46AM73 LCD TV Won't Turn On - YouTube

? 3:28
https://www.youtube.com/watch?v=y5j3RGUe4gM
Feb 25, 2015 - Uploaded by Awesome Things
JVC LT-46AM73 LCD TV won't turn on after power outage. ...LCD & LED TV Repair - No Image & Blank Black ScreenFlashlight Test - How to ...

JVC wont turn on - JVC - Streaming Video & TVs

www.tomsguide.com/answers/id-1677424/jvc-wont-turn.html
May 15, 2013 - JVC lcd tv will act like its turning on then the green light after 2 seconds ... wont turn on Forum; SolvedAcer Laptop V4DA2, screen won't turn on.

My Jvc Av-32F476 Tv Won't Power On, The Green On Timer Light Stays ...

www.diyforums.net/my-jvc-av-32f476-tv-wont-power-on-the-green-on-...
Dec 8, 2013 - My jvc av-32F476 tv won't power on, the green on timer light stays on and m. ... On the remote control, look for the buttons PICTURE MODE and DISPLAY, with ... My Jvc Lt24dd52j Won't Turn On The Blue Light Is Flashing But ...
Nov 1, 2014
I Have A JVC LT-42TG30J, Randomly The Tv Has Decided It ...
Aug 29, 2012
I Have No Picture On My 47 Inch On My Jvc Big Screen Just A ...
May 23, 2012
My Dynex 42" Wont Turn On Power Led Is Lit Up But It Won't C ...
May 24, 2011
More results from www.diyforums.net

Jan 18, 2016 | JVC Televison & Video

1 Answer

Trying to program Insignia remote to JVC TV


Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Codes for JVC TV are: 0060 0026 0197 0069 0247 0923 0012 0065 0067 0141

Aug 19, 2012 | Insignia New Original KK-Y284B Remote...

1 Answer

Universal dt008 REMOTE CODE AND INSTRUCTIONS


Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Codes for JVC TV are: 0060 0026 0197 0069 0247 0923 0012 0065 0067 0141

Aug 19, 2012 | JVC AV-27D302 27" TV

1 Answer

How to tune a JVC AV-28R57SK using a universal remote


Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
    Codes to check are.
    0060 0026 0197 0069 0247 0923 0012 0065 0067 0141

May 12, 2012 | JVC Televison & Video

1 Answer

Have model # AV-20220 front red power timer light flashing but tv will not come on when power button is pressed.


this sometimes indicates a dead or defective secondary power supply,have a certified tech for servicing

Jul 18, 2011 | JVC AV-20220 TV

1 Answer

I need remote control


Hello

You just buy one Philips Universal Remote Control. Model number [ Philips CL 034]. JVC has been listed in its codes. I hereby send codes also.

0607 0204 0321 0508 0326
0993 0802 0108 0308 0715

Direct Code Entry

1. Press and hold the CODE SEARCH

button until the red indicator stays

on, then release the CODE SEARCH

button.

2. Press and release the desired Mode

button (TV, VCR, etc.). The red

indicator blinks, then stays lit.

3. Enter the 4 digit code from the code

tables. Note: after a valid code entry,

the red indicator turns off. For an

invalid code, the red indicator

flashes.

4. With your device on, press

CHANNEL UP. If the device

responds, no further programming is

required. Note: If some buttons do

not operate your device, try one of
the other codes for your brand.
OK

Dec 08, 2010 | JVC AV-32020 32" TV

1 Answer

I need to get code for tv


Hello

Three Digit universal remote codes for JVC are:-

013/ 054/ 055/ 060/ 065/ 067/ 089

Four Digit universal remote code for JVC are:-

0060 0026 0197 0069 0247 0923 0012 0065 0067 0141

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Nov 30, 2010 | JVC AV-27530 27" TV

3 Answers

Jvc television want come on


Reset is done by unplugging the ac cord for a time,then plug
back in...............Please verify model number off sticker on the
                            rear of your tv...let me know.....T.

Oct 22, 2007 | JVC AV-56WP30 56" Rear Projection...

1 Answer

JVC 27" TV


have you considered a bad fly back? good luck

Apr 28, 2007 | JVC AV-32260 32" TV

1 Answer

JVC AV-56WP30 Two Years Old. Up And Croaked


Hi What you are discribing is a condition call power supply overcurrent shutdown the TV is going into a protection mode to prevent further circuit damage you really to call in a tech with JVC projection TV repair skills to fix this problem for you good luck windman

Oct 25, 2005 | JVC AV-56WP30 56" Rear Projection...

Not finding what you are looking for?
JVC TM-A13SUW TV Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75767 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...