Question about Lexmark X5495 Printer

1 Answer

I live in Deutschland where the voltage is 220.Well I need to know if my Lexmark x5495 4 in 1 printer is dual voltage.It does not have a voltage switch.It says on the back that it is 30 volts,but I want to get all the facts before I plug it in & blow it up.Can someone help?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 679 Answers

More than likely it's not compatable if it says nothinh abut being compatible, one would think that it would be displayed someware on the machine as a selling point if it were a dual voltage model.

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

What spect of voltage conventer transfer to convent the Voltage 110 to the 220-240 V printer??

110 volt to 220 power converter 220 volt to 110 voltage ...
110-220 volt voltage converter power transformer 220 volt voltage converters 240 on 120 volt 60 cycles (60hz) and most of the worlds run on 220/240 volt ...

Oct 07, 2015 | Canon F151300 LBP 3100 Mono Laser Printer...

2 Answers

Which power cord do I use with T632? 110v or 220v?

try to look the description if it is for 220 or 110 and it is 100-220 its ok for both

Mar 24, 2014 | Lexmark T632 Laser Printer

1 Answer

Fuser error on lexmark c543, what is it and how do I fix it? Thanks

Fuser error indicates that the printer/MFP has detected a problem with the fuser unit.However, certain rare occurrences, such as a power fluctuation or a static discharge in the vicinity of the printer/MFP, can cause a false error messages to appear.
1) Make sure printer is plugged to wall
2) make sure printer has been in turned on in ambient temperature for 30 min. 3)Power off the printer/MFP, wait 30 seconds, and then power it on again. Did the error message return? 4)If possible, connect the printer/MFP's power cord directly into a grounded wall outlet. In rare instances, a surge protector, extension cord or uninterruptible power supply (UPS), can generate false error messages. Verify also if the printer works on a 110 or 220 volts source. Make sure that the power outlet matches its working voltage rating.
If you still get the error message, I suggest you contact Lexmark Technical Support.

Oct 31, 2011 | Lexmark C543DN Laser Printer

2 Answers

What is the power requirement of lexmark 4800 series? Can I plug the printer to a 220VAC power outlet?

Unfortunately no, Lexmark does have some models that are dual voltage but not this one.

Mar 27, 2011 | Lexmark Printers & Copiers

1 Answer


Problem can be caused by either the dual charge roller, located above the cartridge. Take out the carttridge and lower the front cover for 1/2, then you will see the dual charge roller. Partnumber 40x0127.
Or the High Voltage Power Supply (HVPS). This board is located unther the cover below the cartridge. Partnumber 40X4275

Dec 14, 2010 | Lexmark T640 Laser Printer

1 Answer

How to replace the power supply unit on the Lexmark T640

hi. I wold like to know the output voltage from the several pins in the low voltage area (the blue wires connection) in the power supplier of a Lexmark T640.

Sep 20, 2010 | Lexmark T640 Laser Printer

1 Answer

My lexmark x5495 acts like a fax is coming in. It wakes up, the auto answer lights up for a few second, makes some noise then shuts back down. If the pc is on it will play the 'new fax notification'...

Your phone line is live. It is dangerous. Somewhere there is a voltage leakage or the phone line goes very close for long distanse next to heavily loaded power line. The high voltage current induct also high voltage on the phone line. It is not a constant and have peaks, they are accepted from the fax as a call.

Jun 14, 2010 | Lexmark X5495 Printer

1 Answer

Will a Canon Pixma MP 160 printer work in europe running 220 volt

Have a look on the markings on the adaptor. There it will be mentioned ---input voltage ---- 115V or 220V
If both 115 and 220 are mentioned it will automatically handle voltage differences.

Please make sure to avoid burning.

Dec 18, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Purchased in Australia-can I use in USA? Is it dual voltage or can be converted?

Most printers will work quite happily on 110 or 240V but you will need an adapter for the US power point. Try Tandy of **** Smith. Note that the adapter doesn't change the voltage in anyway it just makes the plug fit. There will be a sticker or engraved fine print next to the power socket or on the bottom of your devices that will say what voltages it is compatible with. If you're unsure don't take the risk.Have a great trip!

Oct 10, 2008 | Lexmark JetPrinter Color Z33 InkJet

1 Answer

High Voltage Power

I would assume if your printer was hooked up to that high a voltage you would need to buy a replacement part for the power supply. Lexmark website states to replace it with a "Class 2" 20 volt dc at 500ma. Basically you just need to contact Lexmark and get the part and have a printer specialist install the new power supply. You could also try another power cable as well. Sometimes the cable is just fried and nothing is wrong with the printer.

Apr 30, 2008 | Lexmark JetPrinter Z22 Color InkJet

Not finding what you are looking for?
Lexmark X5495 Printer Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides