Question about GE MiniCam Pro HO98656 Webcam

1 Answer

Installation issues I keep trying to connect the webcam to my computer and the "Found New Hardware" box opens up but it won't work b/c it gets stopped saying that I am missing one file or another. I can't figure out what's wrong with it at all.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Disconnect the camera from the computer and reinstall the software program. When the program asks you to connect the camera to the USB port, do so and finish the install. Cameras will not work using plug in.
Here is additional info to get setup to talk to family and friends.

Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would i do to connect my 106 ravage wed cam to the pc?


As with any hardware device, there needs to be a software driver to make the webcam work with your computer. That should have been included with the webcam (let me know if it was not, most manufacturers have device drivers available on their websites). Install the driver by putting the disk in the computer, opening the CD drive in My computer or computer (depending on your operating system. Following the prompts on the driver install. Shut down your computer, plug in your webcam in an open usb port and start up your computer. The computer will see the new hardware and look for a driver for it.

This should work to get your webcam installed. If you found this solution helpful, please remember to leave positive feedback. If you need more assistance, please let me know.

Thank You,

Brian

Feb 19, 2011 | I-O Data USB-CAM30MV Webcam

1 Answer

I can't re-instaling my webcam


Open start, Control Panel, click Add or remove programs.

Look for and remove webcam drivers.
Put driver cd in the cdrom drive.
Stop the computer.

Start the computer.
Look for box in the lower right hand side saying "found new hardware - webcamera"

It should then say drivers installed.

Hope that works






Jul 01, 2009 | HP Pavilion dv6000z Notebook

1 Answer

How to install


This is a hardware driver issue.

If your using a MS Windows based o/s on your computer.

Try this: open your internet browser so as to connect on line,then connect the web cam per the instructions and turn it on. This should automatically open the "Found new hardware" wizard, where you can/should chose to search the web for the appropriate software.

If that doesn't work try downloading a free program called "Driver Max" and see if that helps.

These suggestions might only get you the drivers needed, and not all the "bells and whistles" from the original CD, but at least it will work.

Feb 22, 2009 | A4tech PK5

1 Answer

I dont haveany installer for my web cam genius eye 312


This is a hardware driver issue.

If your using a MS Windows based o/s on your computer.

Try this: open your internet browser so as to connect on line,then connect the web cam per the instructions and turn it on. This should automatically open the "Found new hardware" wizard, where you can/should chose to search the web for the appropriate software.

If that doesn't work try downloading a free program called "Driver Max" and see if that helps.

These suggestions might only get you the drivers needed, and not all the "bells and whistles" from the original CD, but at least it will work.

Feb 22, 2009 | Genius VideoCAM Eye Web Camera

1 Answer

I lost my cd for my web cam ge please help me find a cd


This is a hardware driver issue.

If your using a MS Windows based o/s on your computer.

Try this: open your internet browser so as to connect on line,then connect the web cam per the instructions and turn it on. This should automatically open the "Found new hardware" wizard, where you can/should chose to search the web for the appropriate software.

If that doesn't work try downloading a free program called "Driver Max" and see if that helps.

These suggestions might only get you the drivers needed, and not all the "bells and whistles" from the original CD, but at least it will work.

Feb 21, 2009 | GE EasyCam Webcam

1 Answer

I dont have the install thing for my cam is a ge one


This is a hardware driver issue.

If your using a MS Windows based o/s on your computer.

Try this: open your internet browser so as to connect on line,then connect the web cam per the instructions and turn it on. This should automatically open the "Found new hardware" wizard, where you can/should chose to search the web for the appropriate software.

If that doesn't work try downloading a free program called "Driver Max" and see if that helps.

These suggestions might only get you the drivers needed, and not all the "bells and whistles" from the original CD, but at least it will work.

Feb 02, 2009 | GE EasyCam Webcam

1 Answer

How can i download the installer for my creative vibra personal webcamera


1. Do not connect the webcam to your computer before installing thedrivers. If you accidentally begin installation with the webcamconnected, the Found New Hardware Wizard dialog box appears. Click theCancel button.
2. Then download this updated driver pack. It is azip file you must unpack to a folder.

http://blog.benjarriola.com/Vibra.zip

3. Click the names of the drivers and applications you want to install on your computer.
4. Follow the instructions on the screen to complete the installation.You may be asked, after an application is installed, if you want torestart you computer. Do not restart your computer until all thedrivers and applications are installed.
5. Connect the webcam's USB cable to an available USB port on your computer and wait for Windows to detect the device.
6. When the Found New Hardware Wizard dialog box appears, selectInstall the software automatically (Recommended), and then click theNext button.
7. When a Microsoft warning dialog box appears, ignore the message and click the Continue Anyway button.
8.Installation will complete.
9. Check the image in the Video preview pane of the Vibra Webcam CameraConfiguration dialog box. If it flickers or displays a series of darkbands, click the Cancel Flicker button.
10. Click the Finish button, and reboot if necessary.
When you boot up, you can check the Device Manager (ControlPanel > System > Device Manager). Click the plus(+) sign next to theImaging Device icon. The entry "Vibra Webcam" should appear.

Done!
Hope this helps :)

Chris (ziraffa)

Dec 23, 2008 | Creative Labs Vibra Webcam

1 Answer

I could not install the driver for pd1100 webcam on my windows XP machine. It say it is not licences with microsoft. What can I do? How can I install it?


Hiya Sivamathy,

1. Do not connect the webcam to your computer before installing the drivers. If you accidentally begin installation with the webcam connected, the Found New Hardware Wizard dialog box appears. Click the Cancel button.
2. Insert the disk. If you are definitely having problems with the drivers on that disk, then download this updated driver pack. It is a zip file you must unpack to a folder.

http://blog.benjarriola.com/Vibra.zip

3. Click the names of the drivers and applications you want to install on your computer.
4. Follow the instructions on the screen to complete the installation. You may be asked, after an application is installed, if you want to restart you computer. Do not restart your computer until all the drivers and applications are installed.
5. Connect the webcam's USB cable to an available USB port on your computer and wait for Windows to detect the device.
6. When the Found New Hardware Wizard dialog box appears, select Install the software automatically (Recommended), and then click the Next button.
7. When a Microsoft warning dialog box appears, ignore the message and click the Continue Anyway button.
8.Installation will complete.
9. Check the image in the Video preview pane of the Vibra Webcam Camera Configuration dialog box. If it flickers or displays a series of dark bands, click the Cancel Flicker button.
10. Click the Finish botton, and reboot if necessary.
When you boot up, you can check the Device Manager (Control Panel>System>DeviceManager). Click the plus(+) sign next to the Imaging Device icon. The entry "Vibra Webcam" should appear.

Done!
Hope this helps :)

Chris (ziraffa)

Dec 21, 2008 | Creative Labs Vibra Webcam

1 Answer

My webcam is not working, it came out a box say hardware not found. and I download the drive its still not working. computer is vx2s


If your webcam has a USB interface, there may be issues with the port. Try all your USB ports. Some USB terminals do not fit well with the USB ports. You may also try installing your hardware in other computers if you have access and find out if it works.

Sep 08, 2008 | ASUS Computers & Internet

1 Answer

I dnt hv cd installer


1. Do not connect the webcam to your computer before installing the drivers. If you accidentally begin installation with the webcam connected, the Found New Hardware Wizard dialog box appears. Click the Cancel button.
2. Then download this updated driver pack. It is a zip file you must unpack to a folder.

http://blog.benjarriola.com/Vibra.zip

3. Click the names of the drivers and applications you want to install on your computer.
4. Follow the instructions on the screen to complete the installation. You may be asked, after an application is installed, if you want to restart you computer. Do not restart your computer until all the drivers and applications are installed.
5. Connect the webcam's USB cable to an available USB port on your computer and wait for Windows to detect the device.
6. When the Found New Hardware Wizard dialog box appears, select Install the software automatically (Recommended), and then click the Next button.
7. When a Microsoft warning dialog box appears, ignore the message and click the Continue Anyway button.
8.Installation will complete.
9. Check the image in the Video preview pane of the Vibra Webcam Camera Configuration dialog box. If it flickers or displays a series of dark bands, click the Cancel Flicker button.
10. Click the Finish botton, and reboot if necessary.
When you boot up, you can check the Device Manager (Control Panel > System > Device Manager). Click the plus(+) sign next to the Imaging Device icon. The entry "Vibra Webcam" should appear.

Done!
Hope this helps :)

Chris (ziraffa)

Dec 27, 2007 | Creative Labs Vibra Webcam

Not finding what you are looking for?
GE MiniCam Pro HO98656 Webcam Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Computers & Internet Experts

micky dee

Level 3 Expert

2642 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Ricky Ostrom
Ricky Ostrom

Level 2 Expert

270 Answers

Are you a GE Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...