Question about Aiwa AV-DV75

2 Answers

AV-DV75 volume control not working

When I turn on the receiver the volume instantly goes to max volume. I can turn the volume knob and the numbers will slightly decreace then go right back up to max volume. I would guess this to be the volume potentiometer? Does anyone have a part number for this item and konw where I can purchase it? (I do not have the remote for this item, so it is not the culprit.)

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,070 Answers
Re: AV-DV75 volume control not working

Hi Deebo check the following website good luck open the set and you will find the part number printed on the body of the component. NB.but i am in the belief that it IS your IC that is damaged.

Posted on Apr 26, 2007

Re: AV-DV75 volume control not working

I have seen a lot of people with this problem on this receiver... it is really bad quality i guess :(
Sorry can't help.

Posted on Jan 14, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

3 Answers

Yamaha RX-V1000 volume control erratic, remote doesn't work. All was well then the volume control knob became erratic (volume would change erratically as knob was turned in either direction, remain...

sounds like you need to take it in to have it looked at. no simple fix unless you are an appliance technician. hard to walk a beginner through. i suggest calling an stereo repair guy.

Fix Ya
FixYa Support

Please accept solution and rate 4 thumbs up! Thanks for your feedback!

Aug 21, 2011 | Yamaha RX-V1000 Receiver

1 Answer

I have AIWA AV DV75. It turns on but no sounds. Would you tell me the solution if you have an idea?

Register and download the manual for free at

Page 22

We can't make assumptions that all is connected and selected properly.

Feb 19, 2011 | Aiwa AV-DV75

1 Answer

Will not turn on

Page 23...

There may be a short circuit in the speaker terminals.

Disconnect all speakers and try it. If it works troubleshoot each speaker one at a time. Shorted wires are indicated.
© Disconnect the AC cord, then correct the speaker connections.

May 04, 2009 | Aiwa AV-DV75

1 Answer

Aiwa receiver AV-DV75 powers up then down instantly

mi se sfiza aiwa sistmi buferi ali nemam moznis da kumim.....

Jan 02, 2009 | Aiwa AV-DV75

1 Answer

Aiwa AV-DV75

There may be a short circuit in the speaker terminals.

Disconnect all speakers and try it. If it works troubleshoot each speaker one at a time. Shorted wires are indicated.

Jan 02, 2009 | Aiwa AV-DV75

1 Answer

Volume problem with VSX-D409

Had the same problem. I had to replace the volume contol. It was inside the receiver behind the knob. It has a part# on it. Mine was part# AWX7386 (control assembly) from If you can figure out how to open the case than you can change this piece. Good luck

Dec 23, 2008 | Pioneer VSX-D409

1 Answer

Speakers stopped working.

More than likely you have blown outputs, as the sound you hear when you touch the leads to the terminals is the DC offset of the power supply being routed through your speakers...accordianman

Jun 09, 2008 | Aiwa AV-DV75

1 Answer

Broken receiver

I bought my AV-DV75 from Best Buy about 10 years ago and it still works. However it did stop working a while back. I don't know why. I alsmost threw it away. But I unplugged it for a couple of days, then plugged it back up and it came back on. It is still working. Maybe that will work for you.

my center speaker quit working recently. If you decide to sell your AIWA speakers will you please email me?

Aug 14, 2007 | Aiwa AV-DV75

1 Answer

AV-DV75 center speaker works surround speakers do not

If all others had been fine before this problem arose, and you are sure that you haven't changed anything in your amplifier's channel selection menus, the problem might be deeper to solve! Try these out; 1-If the amplifier has a test menu to check out all channels plugged in, activate it. You must be able to get sound, which is like rustle, from each speaker. 2- Check your plugs, cables etc. be sure that there isn't any short circuit 3- Grab your amplifier's remote control and find the "channel selection menu" that allows you to increase and decrease volume levels for each speaker independently.

Apr 15, 2007 | Aiwa AV-DV75

Not finding what you are looking for?
Aiwa AV-DV75 Logo

782 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aiwa Audio & Video Receivers Experts

The Knight
The Knight

Level 3 Expert

66537 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers


Level 1 Expert

41 Answers

Are you an Aiwa Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides