Question about PC Chips M963GV (V3.3A) Motherboard

2 Answers

My computer says your dirvers for dvd player are not there, could you help the type is for HL-DT-ST RW/DVD GCC-H21Nhttp://

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Hi homboboro, click on the LG link below to update your, LG HL-DT-ST RW/DVD GCC-H21N drive by downloading the,
GCC-H21N_103(EW).zip file into a folder. Create a folder on your desktop & give it a name. Once the file has been downloaded uncompress the .zip file & run the software.
http://ca.lgservice.com/index_b2c.jsp
Once LG's site has loaded, click on the floppy icon "Device Driver".
In the next window that opens click the dropdown menu & choose "Combo Drive" & click than click the "Search" button. You'll find the GCC-H21N_103(EW).zip file second in the list.

Good luck homboboro!
Follow the instructions.
Mike

Posted on Jan 03, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

You can them from the company who made the dvd player.Try going to device manger in your control panel.Find your player & right click then click update drivers.Majorgeeks might to.

Posted on Jan 01, 2009

  • bigguy1967 Jan 01, 2009

    Go to driver Detective its free download & scan.It tells you out of date drivers & not fond.If none are found ror sure.Best bet is the company or get driver det.Try Google & put free drivers for ???Make sure you put free.If you want them you can find for free someware.But Driver Detective is the **** you will need them more then you think its not a bad deal.I looked for drivers until I was blue in th face then got Driver Detective.Good luck

  • bigguy1967 Jan 01, 2009

    Divce manger should tell you the name.Get the name go to Googles & put free drivers for ?Most of the time only company ones are free.Everybody gives free downloads & scans.Cash for the drivers

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE D845GVSR MOTHERBOARD I HAVE INSTALLED ALL DRIVES BUT SITLL WHENI CONECT DVD/CD DRIVE IT IS ASKING FOR DIRVER . IT IS SHOWING YELLOW EXCLAMATION SIGN DEVICE MANAGER ON CD /DVD DRIVE(HL-DT-ST...


do you have a cd for the motherboard if you do put it in and install drivers try that first ok . if not go to the web site go to your board manufactor download drivers from them ok jim

Sep 20, 2011 | Intel D845GVSR Motherboard

1 Answer

I have LG DVD RAM HL-DT-ST DVD-RAM GSA-H55N version 5.1.2535.0 It do not read and write blank DVD also the dvd rom drive do not show any when i insert any dvd (blank or full )



Click start control panel,administrive tools,computer management,device manager scroll to cd/dvd rom drives right click properties then properties again then tick enable cd digital cd audio for this cd rom device or scroll to dvd regions select the no _ for your specific area
If this does not fix the problem you might try

your drivers may have been corrupted or you might have a virus run your antivrus program
you might have to physically unplug the leads for this lg-dvd then plug them back in this should activate the found new hardware wizard or
you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device
click start control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives right click you will see options to update driver,roll back driver,or
select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall
make sure that the cd-dvd burner is getting enough power test all leads that are attached to the dvd burner including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or

if this does not fix the problem it might be a registry problem
Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak
If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer

Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.


It could be a problem with the lens, you should try cleaning the lens, it's already gone bad there is no harm in trying If you take a little risk can solve . follow the instruction: Don't panic its very simply. 1. When running your pc , open the drawer.> 2. switch off the ac power 3. remove power cable & sata or pata cable 4. remove all the screw from the back side 5. press clip to open the font panel 6. reverse the cd/dvd rw 7. just remove the cover 8. clean the optical lance 9. use a little( not much )oil place on two steel shaft 10.cover all the equipment 11.now you can fit to your pc Ifit does the same problem please change the cd/dvd rw because the lance has defected. Hope it will help you.

hope this helps


Feb 04, 2011 | Motherboards

1 Answer

My dvd player hl-dt-st rw/dvd gcc4522b do not play dvd but can play cd


Control panel,administrive tools,computer management,device manager scroll to cd/dvd rom drives right click properties then properties again then tick enable cd digital cd audio for this cd rom device or scroll to dvd regions select no _ for your specific area
or
make sure that the dvd burner is getting enough power test all leads that are attached to the dvd burner including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or
your drivers may have been corrupted or you might have a virus run your antivrus program
you might have to physically unplug the leads for this cd/dvd burner then plug them back in or
you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device
control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver,roll back driver,or
select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall
hope this helps

Dec 28, 2010 | Motherboards

1 Answer

Please may anyone assist to get driveres for dvd/rom-rw cc-dt-st rw/dvd gcc-4418b


ther are no driers required for cd/dvd drivers/burners in any windows above win me, that is win2000, winxp, vista or win7, all of these recognise cd/dvd drivers automaticaly,

1. click on "my computer",
2 if you see your cd/dvd there, then click right mouse button on it, 3. click left mouse button on "eject",

if cd is ejected, nothing wrong with your cd/dvd.

if you do not see cd in "my computer" listing, you need to check if all cables are plug in properly on it, remove side from your computer and check connections.

if cd i snot reacting to "eject" command, you need new cd rom, they cost aobut $25 to $50, depending where you buy, and are very easy to change.

if you want to do that by yourself, and your computer is not notebook, then you need philips screwdriver and that is all...

1. switch off computer
2. remove power cord from computer
3. remove both sides from the computer (screws on the back are holding them or sometime they are self-lock, then you maybe need bit help from person who know how to deal with self-locks.
4. remove four screws from your cd-rom sides holding it.
5. push cd-rom slightly forward and remove power and data cable from the back, remembe what position they were up!
6, push cd-rom forward till you remove it from the case.
7. check pinouts (if any) on the back of the cd-rom and change new one to exactly same.
8. partially slide new cd-rom in so you can connect back data and power cable
9. slide new cd-rom fully and mount the screws
10. mount sides of the computer
11. insert power cord
12. start the computer and enjoy your movie...

if on other hand you need software to write cd/dvd then search in google or any other search engine for: "free cd/dvd burn software" you will have few millino entries... choose that which offer really free, not only free download and use it. download few and try all, keep that one which you find most useful and delete all rest...

if you find my advice useful, do not hesitate leave comment, or vote4 for me, or even both :-) thanx!

Aug 04, 2010 | Motherboards

1 Answer

I get problem code 39 on hl-dt-st-dvd-rw_gsa-h41n ata device


This fix is at Microsoft, just pick your OS.

http://support.microsoft.com/kb/314060

Mar 01, 2010 | Motherboards

1 Answer

USB driver 2


Can you be more precise? You don't need USB driver for this PC...

Jun 25, 2009 | Gigabyte Motherboards

1 Answer

Problem


Try removing the software for the printer again and disconnect the USB cable from the computer. Reinstall the software and after its finished reinstalling, reconnect the USB cable to computer. Many USB printers require you to install the software first without the printer connected to the computer.

Jun 17, 2009 | Motherboards

2 Answers

Motherboard driver


here all the utility to your motherboard, download in this site: http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2669

Jun 17, 2009 | Motherboards

1 Answer

I need a DVD/CD-ROM driver HL-DT-ST DVDRAM GSA-H42N


Poseo una pc con tarjeta madre PCchips, P29G, V:1.0, DDR2 533 Mbytes. La compre de remate, al formatear el disco duro no reproduce sonido.

Oct 25, 2008 | PC Chips M963GV (V3.3A) Motherboard

Not finding what you are looking for?
PC Chips M963GV (V3.3A) Motherboard Logo

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Chips Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you a PC Chips Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...