Question about Lands Phones

6 Answers

Cant get search 1 of phone to let it work

No incoming or outgoing calls

Posted by on

  • mooreofkeith Dec 28, 2008

    hi,
    cant get search 1 of phone to let it work.
    no incoming or outgoing calls.

    (Binatone MD750 Triple Cordless Phone)

×

6 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

To start test the phone line using a different phone and phone cable, use any old phone you know is working. If there is no line, call the phone company.

If the line is ok test a replacement phone cable.

Ensure also that the p[hone cable is well inserted on socket, do this on both sides.

If line and cables are fine, then that means that the phone is probably defective.

Posted on Dec 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,800 Answers

Check wires and connectios

alsi check the rj35 cable or jack!!

Posted on Dec 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

Try this reset

  • Remove the battery.
  • Reinsert the battery after 30 minutes.
This will reset your phone.
The other possibility is that the Base Station has to be at least one metre away from other electrical equipment. If there is one Base Station and an extra charging unit rather than two Base Stations both handsets have to be registered to Base Station One.
If this doesnot work restore to factory settings and start again.
For restore to factory settings you need to follow the instruction from manual .
Hope this helps .

Posted on Dec 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 679 Answers

Do both phones connect to a phone line or just one. If it's transmitting to the second extension it presents an entire different se of solotions, please check the the jack, with another phone, a corded phone is best in these troubleshooting type of problems. Connet a working phone to the jack and let's see if it' the jack or the phone.

Posted on Dec 28, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 100 Answers

Wire getting cut somewhere please check out that first.and also give me more details about your device.

Posted on Dec 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lands Phones Master
  • 13,433 Answers

Hi
please provide more details about your problem, what is the brand and model of the phone and the error message or problem in detail.
Thanks

Posted on Dec 28, 2008

  • Ekse Dec 28, 2008

    Hi,


    sorry I'm still confused.


    can you provide more details about the issue, what have you done so far? have you just plugged the phones in? do you have the user manual there? 

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My phone is lock and i get income calls but cant make outgoing i just signed up for metro pc i left t moble.


first check your call barring status, there might be restrictions affecting your not being to make outgoing calls

Sep 12, 2011 | Samsung Cell Phones

2 Answers

How to configure panasonic exchange Model KX-TEM 824 to work with telemanager call tracking software using telephone KX-T7730


It's pretty straightforward. The DB-9 connector on the cabinet is turned on by default for incoming and outgoing calls, so all you have to do is connect your serial port to the Panasonic serial port at 9600,n,8,1 (default). In the Maintenance console, tab 1.7 adjusts the output. How you set up the software is part of the manufacturer's instructions. The Telemanager software on my search engine was designed for the NANP only.

Carl

Mar 01, 2011 | Panasonic KX-T7730 Corded Phone

1 Answer

What is default call barring codes for outgoing calls..for x2-00


hi i cant get send of receive messages or calls its saying that i need a 4 digit call barring code for outgoing and incoming calls.

Jan 23, 2011 | Nokia Lands Phones

1 Answer

I cant send any text but i can receive them.incoming and outgoing calls work fine. is there a reset button? (samsung rouge)


i cannot send text messages on my Nokia n97c. also the rear speaker is very quiet and is hard to hear when making a call. i am only useing 1 sim in the phone, and the network is at&t.

Jan 03, 2010 | Cell Phones

1 Answer

Nokia n73


Hi,
Please make sure your outgoing and incoming calls are not barred.
go to settings
go to call settings
go to call barring
and check the status of your outgoing and incoming calls.
There is also a line 1 and line 2 facility. Make sure you are using Line 1

Hope the above is helpful.

Thanks,
Kanu

Aug 04, 2009 | Nokia N73 Cellular Phone

1 Answer

How to erase incoming and outgoing calls in


go to resent calls and delete the incoming and outgoing calls

Jul 17, 2009 | Panasonic KX-TGA101S Cordless Handset

1 Answer

Philips VOIP8411B/37 IP Phone - Cannot make outgoing Skype calls


the internet connection's outgoing is too slow. ALl internet connections have an outgoing and an incoming speed. Make sure you are not uploading anything to the internet or get a faster internet service provider

Apr 29, 2009 | Philips VOIP8411B/37 IP Phone

1 Answer

Call forwarding for NorStar m7310


You have to know how to get into programming, and it depends on the type of telephone lines you have... if you have regular analog lines, on a out bound call transfer there is going to be line degragation. Meaning that the outgoing call is not going to be of the best quality.

Secondly, you have to see how many telephone lines you have, if you have 3 analog trunks, with a call forwarding to a cell phone, you will be using up 2 lines... 1 incoming and 1 outgoing to your cell. This leaves 1 trunk for incoming or outgoing callers.

Jan 22, 2009 | NorStar M7310 Phone

2 Answers

Call barring


Use the network services menu for this...

Use this menu to access network services. Please
contact your service provider to check their availability and subscribe to them, if you wish.

This network service allows you to restrict your calls.
1. Select a call barring option:
All outgoing: prohibit outgoing calls.
International: prohibit international calls.
International except home: only allow calls
to numbers within the current country when
you are abroad, and to your home country.
All incoming: prohibit incoming calls.
Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
Cancel all: cancel all call barring settings,
allowing to be sent and received normally.
Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
This network service allows you to restrict your calls.
1. Select a call barring option:
All outgoing: prohibit outgoing calls.
International: prohibit international calls.
International except home: only allow calls
to numbers within the current country when
you are abroad, and to your home country.
All incoming: prohibit incoming calls.
Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
Cancel all: cancel all call barring settings,
allowing to be sent and received normally.
Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.

if you have any queries about your mobile..you can have a look at this user manual which can be downloaded from

http://safemanuals.com/user-guide-instructions-owner-manual/SAMSUNG/SGH-D600-_E

hope this helps :)

Dec 16, 2008 | Samsung SGH-D600 Cellular Phone

1 Answer

Cant call


These devices are made to work in both modes you may have to reset, remove the battery while the cell is on and count to 30, then replace battery and power back on this should work! If it does'nt call your provider and check Sim card.

Sep 11, 2008 | Motorola Mobility RAZR V3m Cellular Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

101609 Answers

Cindy Wells

Level 3 Expert

4888 Answers

yadayada
yadayada

Level 3 Expert

67930 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...