Question about Philips CD4452S/05 Digital Telephone and Answering Machine

1 Answer

Phone wont ring

I have the base with three additional handsets, only two are hooked up, and none of them ring when I get a phone call. They light up to show and incoming call, but no ring.

Posted by on

  • Anonymous Jan 07, 2009

    Same problem.

  • optionsforme May 21, 2009

    Phone on Time Warner cable and won't ring. Ring is NOT muted and I set the ring volume fine. Still no ring.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 47 Answers

Per the manual, If there is a musical note in the display with a slash thru it, you have turned off the ringer. You have done this by pressing and holding the # button.
If you have the manual it's on the bottom of page 20 and continues on 21.
If not follow these steps.

Press Menu
Press CID/PBK (Personal set)
Press Menu (Handset Tone)
Press Menu (Ring Tone)
Press Menu and then CID/PBK to select the volume you want
Press Menu (Save Setting)

click this link to get the manual

http://www.p4c.philips.com/files/c/cd4452b_37/cd4452b_37_dfu_aen.pdf

Posted on Jan 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turning the ringer on my phone. uniden 6.0


Without the model number of your Uniden phone, I don't know which silencing feature you are dealing with.

Some Uniden handsets have a Silent Mode. To toggle this on and off, press and hold the # key (below 9) for 5+ seconds when the phone isn't in use. When the silent mode is enabled, the handset will ask for a length of time for the 'no-ring' option. If no key is pressed, then the Silent Mode will continue until the # key is held again.

Other Uniden phones have Do Not Disturb. The button to enable/disable this will be on the cordless phone base. The answering system will automatically turn on and none of the handsets will ring when this feature is enabled.

You can also set the ringer volume to zero. Depending on the phone, you can reset this by pressing the volume up/down buttons or going through the menu. Look for the Ringer Volume in the same section of the menu as the Ring Tone options.

If you need additional information, please add a comment with the model of your phone. I hope this helps.

Cindy Wells

Jun 13, 2016 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

I have the Dect 1683 with three handsets. We had a hurricane and the power went out and not all three handsets read "Searching" and I get no dial tone. When the phone rings it rings but you...


Hello
Just unplug the base unit from AC wall power socket for a while, say for about 5 minutes or so, replugh the base unit to power socket again. Place each handset on it and synchronise it with the base unit. As you put it on, you will hear a beep sound. Now the ahndset ahs been synchronised with base unit. Do this for the other two handsets. OK.

Aug 30, 2011 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

I have a GE 25942EJ3-C three phone set. I move


place the additional phones on to main base the charge/in use light will blink and reset phone.

Nov 19, 2009 | GE 25942GE2 Cordless Phone System

1 Answer

VTech 2420 handset will not promp me to key in the base ID


If the other three handsets work ok then you have a defective handset.

Mar 17, 2017 | Vtech VT 40-2420 Cordless Expansion...

1 Answer

We have BT Studio 1100 with three handsets. From working well, they all became dead. We have changed the batteries. The phone line is working, and there is electricity reaching all the cradles which...


I have the same phone but with two handsets. Incoming calls only ring on the base and I cannot answer or make calls as the handset is permanently flassing "base 1". I have tried disconnecting and reconnecting. Also tried to restart setup but this is showing unavailable although I can still access the phone menus.

Jul 01, 2008 | Lands Phones

1 Answer

Initializing


The hand-sets are not registered with the base-station. Reset system by: remove batteries, unplug base station, disconnect batteries in all hand sets. Wait 15 minutes. Reinstall batteries in hand sets. Reinstall batteries in base station, plug base station in. Place each hand set in the base station until it automatically registers (usually immediately, or within 1 minute or so).

If that doesn't fix the problem, if possible, return the system to where you bought it for exchange or refund. If that isn't an option, call Thompson help line. They are not particularly knowledgeable, but will authorize a return to the a repair center. The process is slow...

My experience: The two hand sets that came with my system worked perfectly, but none of the three additional handsets I purchased would register. The three additional handsets I purchased were the last three on the my retailer's shelf, so, retail exchange wasn't an option. I contacted Thompson and they authorized return for repair or replacement. The repair center received my handsets on October 29, 2008. Its now November 27, 2008 and I'm still waiting.

Mar 03, 2008 | GE 28128EE2 Phone

2 Answers

Phone rings, but once answered its not possible to hear a voice.


Similar issue - brand new phone - but incoming calls (skype or landline) would ring - and then nothing, and outgoing calls the handset would just reset.

The handset would just lose signal constantly (less than 2 meters from the base station).

The phone shipped with the latest software - but eventually I reinstalled it - no change, then de-registered the handset, powered everything down and re-registered the handset and that *seems* to have done it .....

So
1 - reflash / re-install latest software from philips website (even if the phone already has the same version)
2 - de-register handset (follow instructions)
3 - unplug base station and remove batteries from handset
4 - turn on base station, put batteries in handset
5 - re register handset (follow instructions in manual)

and that seems to do it.

Nov 18, 2007 | Philips VOIP8411B/37 IP Phone

1 Answer

Base set fine - additional handsets dont work


The additional handset and the base need to "pair" first. Put the handset in the base cradle till you see the red light blinking. That's when they are paired.

Nov 07, 2007 | GE 25951EE2 Phone

1 Answer

Main handset won't work; additional handsets do.


Check that you have the larger power adaptor connected to the base unit.

May 16, 2007 | Doro 530 Twin Cordless Phone

Not finding what you are looking for?
Philips CD4452S/05 Digital Telephone and Answering Machine Logo

581 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Lands Phones Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

4983 Answers

Are you a Philips Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...