Question about Crosman (4032)

1 Answer

Missing slide bolt

I have a benjamin franklin model 342 that is missing the bolt. All other parts of gun are fine. Does anyone know where I can order a bolt for this gun or a place it can be sent to for repair?
Thanks for any information. This gun belonged to my son who is deceased and I want to repair it and give it to his son.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Send it to your local gun store and see if they can fix it....

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a crosman model 380, .22 cal pellgun that leaks when the co2 is inserted and punctured. I cant see any seal or O-ring at the puncture point. What is missing and how can I fix the problem. Matt


I have the same problem and have dealt with guns for 40 years !
I am glad to see that the other folks have some realistic and innovative ideas of how to remedy this problem.
I went to Lowe\'s on a "tip" and found some very small \'O\' Rings for $ 0.87 for two and I am experimenting with them. The first try I couldn\'t crank the screw down far enough to even puncture the CO2 Cartidge. Using a larger screwdriver I finally managed to puncture the cartidge, unfortunately it still leaked but waas a much smaller leak.

Still experimenting.

I am going on-line to locate the Model 380 Schematic diagram which is where I ran int this site.

Good luck all !

Aug 17, 2011 | Crosman (4032)

1 Answer

New gun - Storm XT Model c1k773932. Never used


where can we order the spring for this gub?

Nov 26, 2009 | Crosman (4032)

1 Answer

Model 9422M 22Mag gun was stolen aprox. a year ago police returned it today. large amount of rust and magizen tube missing.


You can try to clean the rust with toothpaste and a lot of rubbing with a soft rag. Have a gunsmith order a magazine tube for you and install it. This shouldn't be expensive. hope this helps you

Oct 30, 2009 | Winchester (026196062448) (20 - 60x70 mm)

1 Answer

I've got bunches of old crosman co2 pistols and rifles early 1960 to early 70s. Where to we go for repair in upstate ny


I don't know about the co2 guns, they usually replace them with a later model. The old pumps can still get repaired. I think crosman bought out benjamin/ sheridan, or was it the other way. anyway, they still make the repairs. I don't have their number in front of me, but you should be able to google them.

Aug 20, 2009 | Crosman (4032)

1 Answer

397 Ben/Sher .177 air rifle - installing repair kit problem


Crosman bought out benjamin / sheridan, and they still repair just all their pump guns. The ring sounds like a piece of a pellet, the barrels are silver soldered to the bottom tube, Not lead. Also, the repair kit should not have too many parts, you can only go so far with those guns before needing special equipment to get them apart. Get a hold of Crosman and tell them that benjamin sent you a bad part. They should fix it.
I had an old Benjamin Franklin in .22 cal, it was just a brass tube with a stock and barrel. I sent it to them, to be repaired, and I wanted the .22, because I had the 5mm and the 177. So I got it back, cost $29, New barrel, in .177, soldered on, new guts, new paint, trigger, bolt, the works.. Brand new gun. I told them I wanted the brass and I wanted the .22, They said oops, sorry. I didn't complain, nice old gun. Hope this helps.

Jul 29, 2009 | Crosman (4032)

6 Answers

Crosman Powermaster 760 pump bb gun won't hold an air charge


Take a look on amazon Amazon com Crosman Powermaster 760 pump and take a look for replacement. have a nice day

Feb 12, 2009 | Crosman (4032)

1 Answer

Pump arm brackets needed


http://www.pyramydair.com/blog/2005/09/fix-your-benjamin-or-sheridan.html

Nov 11, 2008 | Crosman (4032)

5 Answers

Model 342 Benjamin Franklin 22 caliber air gun


I recently purchased a rebuild kit for my 342. I bought the kit from airgundepot. It was the kit for the
392 and I modified it a little. On the new plunger, you have to drill a hole in the center of it the same
size as the pin's smallest diameter. You can use all of the parts in this kit except for the small o-ring. I think it sold for about 39 dollars or so. My rifle was manufactured in 1972 and it fires like new.

Jun 03, 2008 | Crosman (4032)

5 Answers

Fix crosman airgun


need bolt for crosman silhouette sport pistol looks like a crosman 2300T are they the same? if so where can buy bolt

May 27, 2008 | Crosman (4032)

Not finding what you are looking for?
Crosman (4032) Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crosman Spotting Scopes Experts

Brad Brown

Level 3 Expert

13536 Answers

raysaw

Level 2 Expert

223 Answers

jr3261

Level 1 Expert

42 Answers

Are you a Crosman Spotting Scope Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...