Question about Oregon Scientific WRS101 Weather Radio

Open Question

User manual i know there isn't much to the user manual for this monitor, i received this as a gift and i misplaced the maual i beleive it had some frequencies in it to program the monitor. i've had it a while so just like thing get lost. if you can send me this info or through the web i would appreciate it. thanks oliver blackstar

Posted by on

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Freesat remote control manual 02sd

Good morning, afternoon, evening or night; whatever time of day you are viewing this. Thank you for choosing FixYa to solve your request. You want the owner's manual for Freesat 02SD Remote Control? I don't know if this is really gonna help you out, but here's the owner's manual for the Bush BFSAT01SD Freesat Receiver. In this manual, you will see a diagram of the remote and what each button is for.

I know this isn't for the exact model you requested, but this is the closest model to that. Sorry for any inconvenience this may cause, but I hope this will work out for you in the end. Thank you for visiting this website and choosing us as your one-stop solution spot for assistance with electronic product problems and requests. Visit us again soon and have a good day, evening or night; whatever time of day you are viewing this.

May 16, 2011 | Personal Radios

1 Answer

Sony ICF ICF 77 Receiver has intermittent Low Frequency distortion burst when tune exactly to the center of an FM frequency, say 102.5 mHz. When radio is tuned .5 mHz. + or - of the main channel frequency...

Usual problem of these receivers is faulty capacitors. Recommend replacement of all surface mount capacitors and alignment. Contact me .... poikaa(at)yahoo(dot)com

Jan 13, 2011 | Sony ICF-SW77 AM/FM/SW Radio

1 Answer

How to set memory

Here is a specific example. To store
BBC's evening frequency to North America, 5975 kilohertz, into
memory 32, do the following:
1. Press 5975
2. Immediately press the FREQU./METER button
3. Press 3 2
4. Immediately press the STORE button. If the display
flashes, it means that a frequency is already stored into
this memory. To overwrite it, immediately press STORE
again. If you do not want to overwrite it, start over and
use a different memory.
In case you need further settings here is the link for the user manual.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
direct FixYa link:

Sep 18, 2010 | Grundig YB 400PE AM/FM/SW Radio

1 Answer

I need to know what my code is for platte county mo.

Click this link- Your county name is listed twice, which means you have two frequency channels. Try both frequency channels on your radio and the one with that receives the best reception is the one that you should listen to on your radio.

Jul 04, 2010 | Midland WR-100 Weather/RDS Radio

1 Answer

Makita radio wont tune to 87.6fm

This is a typical setup configuration for US countries; the distance between 2 radiostations is 0.2MHz. If you live outside US it is usefull trying to tune at 87.6MHz because there is no station at that frequency. In case you live outside US try to locate a setting at the tune mode section refered as European countries or Asia countries. At these settings the frequency step is smaller. I'll try to locate a user manual in case you don't have one, in order to give you more detailed steps.

In case of a problem or clarification, don't hesitate to post me a reply.
If you are satisfied, rate my solution with the "thumbs" or add a testimonial.

Thanks and regards
Please kindly rate this solution
direct FixYa link:

Jun 02, 2010 | Makita BMR100 Radio

1 Answer

Need a manual for YB 400PE

If you are looking for the User Manual, it can be found at:
Also, if you do a Google Search for YB400PE Manual, you will find many choices.
Best regards ... Hope this helps.

Mar 08, 2009 | Grundig YB 400PE AM/FM/SW Radio

2 Answers

User Guide Or Maual For S350 Grundig

Jul 04, 2008 | Grundig S350 AM/FM/SW Radio

2 Answers

Lost the owner's manual

click here
you can download the manual on that link ok

Mar 30, 2008 | Sony ICF-M410V AM/FM/Weather/TV Radio

2 Answers

Shortwave programmes

Before you call a doctor or an exorcist, verify that you're using your shortwave receiver under normal condition. There are several factors which affects reception of whortwave programs and signals.

1. Check for the time and frequencies. Depending on your country and location, all Shortwave time zones are based on World Time in UTC or GMT ("Universal Time Coordinates" or Greenwich Mean Time") In my country (Philippines, Asia) for example, we are 8 hours advanced from World Time. You can check your time zones and regions using a world map.

2. Check for propagation and band conditions/ openings. During daytime higher frequencies such as 9 -21 Mhz are active, while nightime frequencies are the lower bands such as 3 - 9 Mhz. Daytime and nigthime divider frequency is about 10 Mhz, that means you might receive signals under most conditions during daytime and night time. Check some technical books on amateur radio operations or magazines for radio reception. It might be worthwile to study books or materials on receiving international broadcasts stations before you can receive good or adequate shortwave signals. This might become your hobby too, "DXing" or receiving distant stations from across the world. Try it, but it might be an addicting hobby once you're drawn to it!

3. Check if any shortwave station broadcast in any specific time of day at any frequency. Shortwave broadcasts are scheduled based on band openings mentioned above. If for example I'm a Shortwave broadcaster from Asia, and would like to broadcast my signal through the Americas, I would use band openings with respect with time zones. If it is night time in the Philippines, and daytime in the Canada, I would use the higher frequencies to propagate my signal. So I would specify the time for example "8:00 pm Philippine local time, 12 hours UTC, and 7 am in Canada"--- Asia: 8 hours advanced to UTC, Canada--- 5 hours behind to UTC). So shortwave broadcast schedules varies. Broadcast schedules are available on the net, just search for the Shortwave station you want to hear such as Radio, Japan, Radio Australia, BBC, DW (Deutche Welle) Radio in Germany, China Radio International... There's too many shortwave stations waiting to be discovered out there! Check some books and magazines too such as Popular Communications, Monitoring Times, Passport to World Band Radios, World Radio and TV Handbook, etc. You may want to check if any station would be broadcasting in your dialects as most of these mainstream and regular broadcasters are multilingual.

2. Check your location. If you are using your radio indoors, shortwave signals might not entering your homes or offices due concrete walls and metal railings or fence. There are many factors which blocks radio waves especially in the HF or lowetr bands. Try receiving AM (Mediumwave) first. If it cannot receive any AM station, then you would not receive any Shortwave signal at all, even if you extend fully the telescopic whip. If you cannot receive AM or Shortwave signal indoors, try using your receiver outdoors.

2. Check for local interference. Your receiver might be receiving interference from noise generating gadgets such as PC monitors, TV sets, faulty wall adapters or switching power supplies, motor operated appliances such as washing machines or vacuum cleaners, flourescent lamps, etc. Try turning off or unplugging each of these mentioned gadgets to see if they are the cause. Faulty house wiring or powerline noise might also cause some interference noise which could drown shortwave signals, verify this with your local electrical technicians.

3. Check your radio's settings. Depending on the radio that you use, there might be settings such as attenuator or RF gain, be sure that attenuator are set to zero or turned to off, and RF gain to high. Attenuator must be turned to minimum or OFF position, unless you are receiving too much signas from nearby radio stations. Setting attenuator to mid or high position will attenuate most weak signal, and only those strong local stations will pass through. Setting too much attenuation will prevent you from receiving any station at all. Same with RF Gain, always set it to highest gain setting unless you are receiving too much signals which might overloads your shortwave radio.

4. If these troubleshooting efforts above doesn't works and you still cannot receive any station, then your radio's front end parts might had burn out due to signal overloads. Burn parts might include one or several transistors or diodes. Let your local service technicians check your radio and solve the problem for you. If your radio is still under warranty, send it back to the store or dealer, and let a qualified technician do the repair.

SoundMagik Home Studio
Site Creator, Teen Models 2007

Visit my website at

My YouTube Channel,

My imeem social media channel,

My Talents and Modeling site at

I've also signed up an account at Total Popstar, uploading some promotional videos. You can watch and rate my videos (you can find my videos on the right side of the screen), just click the link here:

Thank you very much. I hope I'll really be of help here at FIXYA.COM!!!

Jan 26, 2008 | Sony ICF-SW30 Radio

Not finding what you are looking for?
Oregon Scientific WRS101 Weather Radio Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oregon Scientific Personal Radios Experts


Level 3 Expert

94032 Answers

The Knight
The Knight

Level 3 Expert

66499 Answers


Level 3 Expert

3018 Answers

Are you an Oregon Scientific Personal Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides