When I turn on my DMC-FZ7, all I get is a white display. Normally when you turn on the camera, you can hear the lens moving in position. Mine only displays a white screen and that's it. After a few minutes, the display is automatically turned off. I guess this is the power management.
The camera does not respond to any button. Any ideas?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It's probably something to do with a lag or jam on your shutterspeed. so when you hit the button, and move you get a little blur. If its not this you might need to have your lens cleaned inside and out due to the camera zooms and catches the blurs on the lens after zooming so far in. I would recommend taking it to your local camera shop for adjustments and cleaning.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said first, you can use any photo cataloging program such as iPhoto which is already on your Mac.
You need to boot in safe mode. Usually, this means to press F8 key repeatedly after turning on your computer. Once in safe mode, go into add/remove programs and remove the offending software. Then, reboot normally and you should be good to go.
Go into menu, setup function, turn OFF "conversion lens" or anything like that. NOTE: a conversion lens is a lens that screws onto front of lens of your camera and the flash would get blocked by it, so there is a function in the menu that turns the flash off when a conversion lens is attached to the camera. If this works, STOP PLAYING AROUND WITH THE MENU TILL YOU READ THE MANUAL. LOL.