Question about Logitech Webcam

1 Answer

Have installed driver for HP Webcam. I get picture from camera.

How do I make contact with someone on the internet who also has a webcam?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Down load Skype or one of the messengers and then follow the instruction below.

To download Skype go to this site, download and install.

Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP Webcam software fails / closes


1st You download Webcam Driver.
HP Webcam software fails / closes
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Jan 20, 2013 | HP Computers & Internet

2 Answers

I bought a webcam but I don`t know how to start to go to skype or take picture or connect to computer. Does not have a C D , just usb


Lillianrod1

If the Webcam does not include a CD, the drivers (the software that runs the webcam) should install itself automatically when you plug in the drive. If you are on windows, make sure you have Windows Update enabled so that it can search for the right drivers.

To start using it in Skype, simply open skype, go into the Preferences, and set the webcam as your camera video chatting. To take pictures, you will need software to control the webcam. http://www.yawcam.com/ is a free webcam software that will let you take pictures with your new webcam.

Mar 05, 2011 | Xerox Computers & Internet

2 Answers

When i invite someone to view my cam,they only see black no pictures,but it works on videocalling


The video software is streamlined, The webcam set-up still has to be made manually
Plug in your webcam and visit this site - Hit 'Allow' in the top window and check your cam in the left hand panel.
Do not proceed if the camera fails to work here, but concentrate on your webcam software / drivers

http://www.testmycam.com/

Having proved your cam is working ,you can configure it to Yahoo Messenger 10.

COMPATIBILITY WITH YAHOO MESSENGER

You MUST use Internet Explorer to visit this page, with your webcam plugged in, to check compatibility and automatically download the latest webcam control. Make sure your webcam broadcasts on this page before moving on

http://help.yahoo.com/l/us/yahoo/messenger/messenger10/webcam/mstacamtest.html

CONFIGURE SOFTWARE
Its good practice to disconnect and re-connect your webcam before you start - if you have been using it elsewhere the Yahoo software may have difficulty in locating it. Mine, I just unplug it from the USB and plug it back in, if yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.
Of all the chat programs, Yahoo is the most painful software to set up but if you follow these instructions you should be ok.

INTERNET CONNECTION
Webcam connected
Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

TESTING
> Messenger > My webcam - the warning panel will launch, click 'OK' and your webcam will start. You should be rewarded at this stage with your happy smiling face.

SET WEBCAM DEFAULT
With webcam still running > Messenger > Preferences > Webcam Broadcast > Camera Source - set your webcam as default using dropbox. > Camera Settings - adjust settings to suit. > Apply > OK
Take a note of any additional software, if you have multiple choice for Camera Source, you may wish to uninstall any redundant webcam software later to prevent conflicts

AUDIO
Open Video and Voice - run through your default equipment and make a test call - click OK

PERMISSION OPTIONS
> Messenger > Preferences > Webcam - make your default equipment selections and who you will allow to view you > Apply > OK

IN USE
When you are both on line and wish to show your webcam > Actions > 'Invite to view my webcam'.
Messenger 10:- > Actions > More Actions > invite to view my webcam. This will launch an invitation on your contacts screen

Aug 05, 2010 | Logitech QuickCam Communicate STX Personal...

2 Answers

I can not insttal my webcam how i do it? my webcam viewsonic 'vx2255wm


Hi there,
Here's the Webcam Installation (taken from user Guide)
  1. Insert the Webcam Wizard CD into your CD-ROM drive, and follow the screen instructions to install the program.
  2. Connect the monitor to one of the computer's USB 2.0 ports, using the USB 2.0 cable that is included with the monitor.
  3. The computer will detect the camera automatically and the webcam icon will appear in the My Computer window.
  4. Please refer to the Webcam User Guide on the Webcam Wizard CD for detailed instructions on using the webcam.
here i include the Webcam Driver:
http://www.viewsonic.com/support/downloads/drivers/_download/VX2255wmb_WebCam_Utils.zip
(simply click on the link to download the webcam driver)

hope it help
regards

Apr 17, 2010 | Computers & Internet

2 Answers

The web cam does not work at all on either the quick viiew software although we have downloaded the driver it is not found


Activating the webcam
The drivers for the webcam are pre-installed and an HP Webcam 1000 icon displays on the desktop. Double-click on the icon to activate the webcam. The blue light illuminated next to the webcam lens, just above the LCD screen, indicates the webcam is on.

If double-clicking on the icon does not activate the webcam, do the following activities:

Click Start, then right-click on My Computer, and then select Properties.

On the My Computer properties window, click on the Hardware tab, and then click Device Manager.
Click on the plus ( +) sign next to Imaging Devices and locate the webcam item in the device list.
If the webcam is not listed, do the following activities to install the driver using the webcam driver recovery.
Click Start, click All Programs, click PC Help & Tools, and then click HP Application Recovery.
Select Driver installation and click Next.
Select the HP Webcam 1000 driver from the list, and click Install.
If the webcam is listed under Imaging Devices but there is a red X on the icon, the webcam is disabled. See figure below.
Figure 1: Disabled Webcam Icon

To enable the webcam, right-click the HP WebCam 1000 icon and click Enable. The webcam icon should display on the Desktop.
Alternate locations for the webcam icon
If the webcam is installed but the icon is not displayed on the desktop, look for the webcam icon in one of these alternate locations.
Click Start, and click My Computer. The webcam icon should be displayed with the other devices. See figure below.
Click Start, and click Control Panel , and then click Scanners and Cameras. The webcam icon should be displayed with the other devices.
The HP Webcam 1000 does not install a listing under any of the All Programs menu.
Using the Webcam Diagnostic Test
To ensure the webcam is operating, do the following activities:
Right-click on the WebCam icon, and then select Properties.
Click on Test Camera under Diagnostics on the General tab.
The test should only take a few moments, but allow the test to complete operations by itself.
The result of the test, either “passed” or “failed”, will be displayed.
Figure 2: Webcam 1000 Properties Window

Mar 11, 2010 | HP Pavilion dv6000z Notebook

2 Answers

How to activate my Webcam


On the My Computer properties window, click on the Hardware tab, and then click Device Manager.
Click on the plus ( +) sign next to Imaging Devices and locate the webcam item in the device list.
If the webcam is not listed, do the following activities to install the driver using the webcam driver recovery.
Click Start, click All Programs, click PC Help & Tools, and then click HP Application Recovery.
Select Driver installation and click Next.
Select the HP Webcam 1000 driver from the list, and click Install.
If the webcam is listed under Imaging Devices but there is a red X on the icon, the webcam is disabled

To enable the webcam, right-click the HP WebCam 1000 icon and click Enable. The webcam icon should display on the Desktop.
Alternate locations for the webcam icon
If the webcam is installed but the icon is not displayed on the desktop, look for the webcam icon in one of these alternate locations.
Click Start, and click My Computer. The webcam icon should be displayed with the other devices. See figure below.
Click Start, and click Control Panel , and then click Scanners and Cameras. The webcam icon should be displayed with the other devices.
The HP Webcam 1000 does not install a listing under any of the All Programs menu.
Using the Webcam Diagnostic Test
To ensure the webcam is operating, do the following activities:
Right-click on the WebCam icon, and then select Properties.
Click on Test Camera under Diagnostics on the General tab.
The test should only take a few moments, but allow the test to complete operations by itself.
The result of the test, either “passed” or “failed”, will be displayed.

Feb 21, 2010 | HP Pavilion dv6000z Notebook

1 Answer

For installation of tricom webcam


Normally most drivers are sold but if you are lucky you can find free drivers.So google tricom webcam driver(specify model) if you find any down load and copy to you storage device/desk top and finally burn a CD. If possible see if you can find someone within your area who has a similar unit and borrow a CD and make a copy.In future learn to make back CD drivers for your own good.

Jul 27, 2009 | HP USB Web Camera

1 Answer

My daughter in Australia has recently updated her Logitech webcam and, since then, she no longer receives a picture from my Logitech camera. My camera operates without problems when I contact other users....


no there is no link in that....i think her internet protol connection is not proper tell her to check her internet settings and tell her to once again re install her webcam

Jul 12, 2009 | Logitech Webcam

2 Answers

I lost my cd of tricom webcam plz help


dear sir/madam
please give me the site which i can download my tricom web cam driver

Nov 02, 2008 | HP USB Web Camera

Not finding what you are looking for?
Logitech Webcam Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2642 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18377 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...