I cannot get my ps3 to pick up an internet signal from my belkin router.I have input all the correct numbers etc, opened up the firewall, put the ip address of the ps3 into the DMZ for the router and the ps3 still times out even though it recognizes the network name.Signal strength is 80%I have re-set the security, from 128 bit to 64 and then even disabled it entirely.It's driving me nuts
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Are you saying you are trying to setup a wireless connection, even though you don't have internet? Impossible!
Normal setup - Connect the ISP modem to main uplink port on router. Then connect pc to any other port. Done!
Now connect PS3 as normal. Look for the Belkin network SSID and Key. There is a small piece of paper underneath the router with default ID and password key. It is also noted on Web Admin page. You can always use the reset to clear any custom settings.
Access point option is only for unsecured connection. Do not use.
You need to install the serial number in your computer off of the router, clcik on diagnose and when it comes up with enter pass phrase input your serial number ans you should be connected. Hope this helps and thanks for using fix-ya.
Type this address into your computers browser 192.168.2.1 from there you can access your routers settings.The wep key will be under security.Once you get the key you can input it on your ps3.If you do not have a wep key make one.Most gaming systems etc won't connect to a unprotected connection.
check the wireless settings of the router . Make sure that you are typing the correct network key if your network is secured. May be you will need to open the ports on the router. Click Here for more information
You need to disable the UPnP function on the Belkin router. Log into the router(192.168.2.1), and look under System Settings for the UPnP function and disable it. If you haven't changed the password on the router, the default password is blank, i.e., no password.
there are many possible reasons and solutions for this
-sometimes the weather can block the signal to a router or PS3
-the closer the router is to your PS3 the better the signal
-try not to have a wall interfering with the signal to the ps3
-a computer in your house may have a signal that is interfering with the signal to your ps3
-maybe comcast just sucks?
-try using a wired connection