Question about Brother HL 1050 Laser Printer

1 Answer

Brother hl-1050 problem

I have a problem with my printer. all the lights didi came on and i thode it needs a service,so i serviced it but still the same probleme.need help pls.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 624 Answers
Re: brother hl-1050 problem

Splash, If you haven't already done so turn the printer off, then back on then let sit with power on for 10 min. If nothing changes all of the LEDs flashing indicate you'll have to take it in for repair. When the manual refers to service they mean a service technician will need to work on the printer. Good luck and please don't forget to rate this post.

Posted on Apr 26, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

All LED lights flashing on Brother HL-2140, how do you clear it?

Your printer needs servicing due to a fault on its electronics. This is due to a power surge or spikes cause by an abnormality in your power distribution system or your power transmission/distribution lines might have been struck by a lightning during a storm and its breakers have failed to cut the power.

As a precautionary measure, always plug electronic devices on surge protectors.

Send your printer to your nearest Brother Service Centers.

Jan 19, 2012 | Brother HL 2140 Laser Printer

1 Answer

Alarm light is on

Your Main PCB needs to be replaced, part number LJ8328001. The part averages $545.00 and is currently out of stock with Brother. I highly recommend you contact your local Brother Service Center.

Thank you for using FixYa! - Don't forget to rate our service!

Feb 07, 2010 | Brother HL 1270N Laser Printer

1 Answer

This printer is coloured?

this printer prints in black according to

here is the user manual

Nov 05, 2009 | Brother HL 1050 Laser Printer

2 Answers

Service manual for a Brother HL-6050DN Laser Printer

You can get the Service Manual for your printer by clicking on the Link below.

The price of $9.95. Thanks

Oct 19, 2009 | Brother HL-6050DN Laser Printer

1 Answer

All four lights flash continually on Brother 2070n printer

If there is an error that cannot be cleared by the user, the printer will show that a service call is needed by
lighting up all the LEDs as below.
c5ae79f.jpg If you see the service call indication, turn off the power switch, wait a few seconds, and then turn it
back on and try to print again.
If you cannot clear the error and see the same service call indication after turning the printer back on, call
your dealer or a Brother authorized service representative.

Aug 04, 2009 | Brother HL-2040 Laser Printer

1 Answer

Brother HL-1440 LASER PRINTER requires ''Service Call A''.

currently, the error you have is not a service errorl, ready and alarm blink means that you have either a paper jam, no paper, or a paper misfeed.

do you get this error only when you try to print?
according to the service manual the lights can not alternate in blinking.

May 30, 2009 | Brother HL 1440 Laser Printer

1 Answer

Brother HL-1440 LASER PRINTER requires ''Service Call A''.

No i think better you call you service dealer. Doing by yourself will be a big problem. For intial reference pls read your service manual.

May 25, 2009 | Brother HL 1440 Laser Printer

1 Answer

Brother HL-2070N

According to the brother site, that means that the printer needs servicing. I talked to a local service center and they recommended chucking the machine--any repair is likely to cost almost as much as a new printer.

It's pretty disappointing.

Feb 25, 2008 | Brother HL-2070N Laser Printer

1 Answer

Printer reset re Brother HL 1230

Resetting the printer should clear the flashing leds (flashing lights.)

How to Perform A Factory Reset:
1. Turn the printer off.

2. Hold in the circular button on the front panel of the printer.

3. Turn the printer back on.

4. When the DRUM light is lit by itself let go of the button. Hold in
the circular button on the front panel again. Once the Alarm light comes
on, let go of the button. This has performed a factory reset on the printer.

If the alarm continues, the printer may need service.

This issue is listed by Brother. Click here to view

Oct 22, 2007 | Brother HL 1230 Laser Printer

Not finding what you are looking for?
Brother HL 1050 Laser Printer Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Printers & Copiers Experts

Jim Yeh

Level 1 Expert

15 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

Are you a Brother Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides