Question about SanDisk 2GB microSD Memory Card

1 Answer

Multi-use SanDisk 2GB SD Card

Received this for Christmas. Tested in camera - OK. After inserting into Toshiba Satellite P25 PC, lockup occurs. When removed, PC unlocks but cursor has a blinking hourglass next to it. If I perform a safe hardware removal the blinking hourglass goes away. Performing a diagnostic produces a PNP Device ID Error Code 47. Using my old Kodak SD card is never a problem. Is there a solution?

Posted by on

  • Vern Haynes
    Vern Haynes May 11, 2010

    Have you formatted the card? It sounds like it might be having difficulty installing your card..

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Windows cannot use this hardware device because it has been prepared for safe removal, but it has not been removed from the computer. (Code 47)Recommended resolutions

Here are some things that you can try to resolve this problem.

Reconnect the device

This error code occurs only if you used the Safe Removal application to prepare the device for removal, or pressed a physical eject button.

Reconnect the device to your computer

Disconnect this device from the computer, and then connect it again.

Restart your computer

Make sure that the device is connected correctly to your computer, and then restart your computer. Click Start, click Shut Down, and then select Restart in the Shut Down Windows dialog box to restart the computer.

Posted on Dec 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2gb SanDisk micro sd card won't work in my mobile and my pc. Its not detected so I wasn't able to format it. I tried inserting it to other pc but it didn't work. I even used external card readers but...


The memory card might already be damaged or corrupted. try inserting it in a linux computer, if it still dont recognize it, then it might be damaged forever.

Jan 21, 2011 | SanDisk 1GB microSD Memory Card

2 Answers

Where can I insert my mini sandisk memorycard into my toshiba laptop? I see no slots for it.


If you have no SD slot on your laptop, you will have to buy an external USB SD reader. They typically cost $5-$10, and are readily available online (e.g. http://www.buy.com/prod/micro-sd-sdhc-card-usb-reader-for-1gb-2gb-4gb-8gb/q/sellerid/23962916/loc/101/213271933.html) or in almost any store with a good selection of electronics.

Dec 06, 2010 | SanDisk 2GB microSD Memory Card

1 Answer

Formatted a 2GB sandisk card in my camera. Lost


If you have an sd slot in your computer you can plug the card into sd slot start/computer/right click removable hard drive disk for sd card format

Mar 01, 2010 | SanDisk 2GB microSD Memory Card

1 Answer

My SanDisk SD memory card for my camera is not working when I put it in my computer.


Sometimes you have to format the sandisk to your computer before using it in your camera or phone in order for the computer to be able to read the disk when it's inserted.

Nov 16, 2009 | SanDisk 2GB microSD Memory Card

2 Answers

How 2 delete music from micro sd mem card using computer ,delete on phone says nothing computer says ihave 625mg left on 2gb card


You might need to format the card. Mine does this all the time, it's extremely annoying, but formatting usually does the trick. Copy all information to your computer, then proceed with the format.

Oct 28, 2009 | SanDisk 2GB microSD Memory Card

1 Answer

Card not working anymore


check that you didn't lock the card by mistake- there is a small "sliding door"- make sure it is covering the hole.

Jul 21, 2009 | SanDisk 2GB microSD Memory Card

1 Answer

My computer does not recognize my SD 2GB SD Flash Card which I insert into my camera and take pictures. I have a slot on my computer for SD cards. Can I just put the card in the slot and access the...


yes you can directly use the SD card slot, make sure you unlock the write protection before inserting it into the slot if you wish to modify or copy the contents from or to the card.

Jun 24, 2009 | SanDisk 2GB microSD Memory Card

1 Answer

Memory card locked


On your SD card, there is a small tab near the top (similar to floppy a disks), just switch that the other way it should fix that lock error.

Jun 11, 2009 | SanDisk Ultra II 2GB Secure Digital Memory...

Not finding what you are looking for?
SanDisk 2GB microSD Memory Card Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Memory Cards & USB Flash Drives Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

k24674

Level 3 Expert

7987 Answers

laikexpert
laikexpert

Level 3 Expert

281 Answers

Are you a SanDisk Memory Card and USB Flash Drive Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...