a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Repairman (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Using blow molding process to produce the watering pot and watering can is portable & convenient & reliable along with good quality and reasonable price. This is common tools for daily care of garden and family bonsai. Take care the plants in bonsai pot, trimming branches and irrigating by watering pot in your leisure time, make your spare time more wonderful.
At the same time, the watering pot has also been favored by the horticulture/gardening companies, since plants absorb dioxide and release oxide to make our working area more fresh and healthly.
The white residue could be water spots from hard water. They are most notably left on clear plastic glasses, clear glasses, and silverware. If your silverware is authentic sterling silver you shouldn't be washing it in the dishwasher anyways as this ruins it.------
The best advice for the hard water is to use jet dry there should be a dispenser for this on your dishwasher. The other solution is to use those oxi clean tablets or the cascade 2 in 1 gel packs. normally,this is caused by hard water. try using a dying agent like jet dry, it will stop the white spots. good luck.-------- This
will help. Thanks please keep
updated.please do rate the solution positively .thank you for using fixya
Please take note; once a phone drops into water or any liquid, first thing you need do is to remove the battery, get a phone screw driver, loose the phone and dry the phone board with bulb or any heat.
The essence is to dry the water totally from the board, because if it dries itself, the phone board will get rust and phone might not work properly again.
Back to your phone, I think the liquid as entered your screen and its not dry yet, that's why its white.
Put off the phone, remove the battery and leave the liquid to dry on the screen or put is near a very light heat and the liquid will gradually dry off.
You have a poor solder connection in the frame output stage. If you have a soldering iron, remove the back cover & look for an IC that will be attached to a metal plate that acts as a heatsink. Carefully re-solder the pin connections on this IC ensuring you dont leave any of the pins shorted together. If you spot any other connections around about this area also looking dry, then resolder them as well.
Hard water maybe?Or your heating element in the bottom may need some cleaning. take pour some vinegar on it and see if the lime bubbles. if so get something like lime away or CLR and pour it on the element let it set for 5 to 10 min then run it through a cycle for rinsing it all out. If the problem goes away for a while then comes back within 90 days I believe you need a water softener.
there is a new product out that filters the water going into your dishwasher. it works great and my dishes look fantastic. they use to look dirty with a white film on them. after the first load when i hooked up the dishwasher filter my dishes looked brand new. it is affordable and works everytime. you can get it at www.dishwasherfilter.com.