Question about Panasonic Projection Televisions

1 Answer

Not sure how to connect surround system to tv

I have a panasonic 42" with sky on one of the scarts, a dvd recorder on the other scart and have just bought a panasonic surround system but i have no more scart on the tv how can i fit my surround system to my tv?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi
Look on the rear of the tv and there should be an audio out connection coloured red and white and this will be a phono connection ( 2 small holes one red and one white) using a phono lead connect this to the same connections on the surround system only this time this will be an audio in connection select the tv channel on the surround system and ensure the tv is on and off you go. Try this and see how you go.

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

RECENTY PURCHASED SECOND HAND TV WITHOUT REMOTE OR HANDBOOK CANNOT SEEM TO SET UP MY SKY BOX TO IT ANY SUGGESTIONS?


Does the S/H TV have AV1 & AV2 settings and a scart socket? If so just connect the a scart lead from Sky box to TV and select AV1.

If you have no scart socket on the TV you need to connect a coaxial (aerial) cable from the sky box to TV and tune in to a channel. It is possible to tune in your sky remote if you have the TV code.




Please remember to rate this solution.

Oct 22, 2008 | Projection Televisions

3 Answers

I have a Panasonic tv model TH 42PZ80B; a Panasinic Blu-Ray dvd model DMP-BD50; a sky box (not as yet HD) and a Sony video SLV-SE 830G. I have a Satellite dish and a normal TV aerial. In the loft I have a...


You need to try and isolate the piece of equipment which is causing the problem.

You've already tried the aerial lead direct to the TV and this is OK.

Disconnect all scart leads and try the RF on its own.

Try the Aerial lead to video, then video to TV.

Try aerial direct to Sky box, then to TV.

Try just connecting the RF out from the Sky box to the TV (no aerial input), can you tune into a good channel 68 picture from the Sky box.

Then Try the VCR to the Sky box (no aerial input), see if you can tune into the VCR and Sky channel.
Hope that helps.......

Jul 10, 2008 | Projection Televisions

1 Answer

I have an LG LCD TV (LG 37LG5000 37IN). I also have an older DVD Home Theatre System (SONY DAV-DZ100). It seems that the surround system works well with DVDs but I cannot get the sound to work with DIGITAL...


It works fine if you plug the surround system SCART lead into the AV2 input. I believe this is a 'smart' scart plug (same as SONY but it is not mentioned as in the literature). The AV1 is only good for inputs NOT outputs as well.

Oct 04, 2008 | Projection Televisions

1 Answer

My Panasonic DMR-EX77EB has problem with background on replay changing from normal colour to garish green, and there's no evident way of correcting problem. Any thoughts? Al Webb/Croughton, England...


I traced the apparent problem to a SCART cable between the DVD recorder and the TV set. I disconnected it, wiped down the points and reconnected it. The problem appears to have vanished straightway, and nearly 24 hours later the system is still working normally. It could be that others have had similar SCART problems and you may find my experience useful. Anyway, thanks for being there even if not needed, and I'll keep you in mind futurely if there are other problems.

Al Webb/Croughton, England

Jul 27, 2008 | Panasonic Projection Televisions

1 Answer

How do you connect the scart cables to a dvd


very simple method, On the back of the dvd you may find 2 scart connetions. Connet the scart lead to the one marked TV and the other end to the tv.
switch on you dvd and it should automatically change to the AV channel and thats it!!!!

Jul 14, 2008 | Projection Televisions

1 Answer

TH37PX70BA - Plasma TV. TV has been fine since we got it just after christmas but suddenly the picture has gone yellow, literally it was fine one second then yellow the next, any advice? Is this a known...


It was nothing to do with the TV it was the way the scarts from the Sky box and DVD player went in, swapped them round and all is fine...in fact the picture seems better!

May 18, 2008 | Panasonic Projection Televisions

1 Answer

Surround sound works with ht-x30 dvd player when playing a dvd but cannot get surround sound with tv only


Is the surround sound integral to the dvd player and not connected to the tv. if it is connected to the tv either by scart or phono leads. do you have to select another input from the surround sound. such as aux or tv

Mar 23, 2008 | Projection Televisions

1 Answer

Connecting TV-DVD recorder-Sky plus


scart from the sky to the dvd recorder. then a scart from each to the tv. Job done.

Jan 18, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...