Question about Dopod D810 Smartphone

2 Answers

My dopod d180 is stuck on a screen which says "Press resend ..."

"Press end to restore factory default, press end to quit". Once I do this the screen comes up with "Restore...complete Press OK to boot" Once I push OK it comes up with the original Press send to restore ... screen again. Does anyone know how I can get back to the home page?
Cheers,
Marcus

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,239 Answers

Hi  first try a hard reset if it doesnt work Copy all files to your PC and reformat the card.   Then transfer any necessary files back to the SD card from your PC.  

Posted on Dec 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Try keeping the start button pressed for few seconds, after the unit shutdown, restart it.

Posted on Dec 28, 2008

  • Ginko
    Ginko Dec 28, 2008

    Try also doing an hard reset, by removing the battery. See on restart, if you are asked again the restore, and you cannot skip it. In that case there may be an additional problem, and the system may not have been restored propery.



  • Ginko
    Ginko Dec 28, 2008

    Try pressing end to exit the restore, try also the following reset:

    Hold side Camera and POWER buttons at the same time, and reset the unit with the stylus.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I restore a Dell laptop to the factory default settings?


Here are the main steps to restore your Dell laptop to its factory settings. Depending on the model you own, the procedure may vary slightly.

Before beginning, please note that by restoring your computer to its default factory configuration, all data on the C drive will be deleted. We highly recommend backing up any personal files before moving forward with the reset.
Hard Reset Dell Laptop Restart your computer by clicking Start > arrow next to the Lock button > Restart.

As the computer restarts, press the F8 key until the Advanced Boot Options menu appears on the screen.

Note: You must press F8 before the Windows logo appears on the screen. If you press F8 after the Windows logo appears, the Advanced Boot Options menu will not appear on the screen. If you do not see the Advanced Boot Options menu, restart the computer, and then repeat this step until you see the menu on the screen.

Press the Down arrow to select the Repair Your Computer option on the Advanced Boot Options menu, and then press Enter. Select your language settings and then click Next.

Log in as an administrative user, and click OK. Then click the Dell Factory Image Restore option.

In the Dell Factory Image Restore window, click on Next. Check the box that reads Yes, reformat the hard drive and restore system software to factory conditions, followed by Next.

The computer will now restore to its default factory settings. Once the restore operation is completed, click on Finish to restart your computer.

Feb 27, 2017 | Dell Computers & Internet

5 Answers

Tablets wont boot up just shows arnova on screen and shuts down


I had same problem looping startup just showing Aenova screen, i tried the pin thing ended up doing a factory reset IT WORKED WAHEY!!
How can I do a Factory Reset on my tablet? If your tablet freezes often or if you get error messages during the start up of your tablet, you can use the recovery mode to reset your tablet to its factory settings, removing all installed applications as well as any data or content.
Your tablet must be up to date with the latest firmware - downloadable from the downloads area of this website.

To access Recovery mode on the ARNOVA 10bG3
To access to the recovery mode:
1. Hold down the volume button + and press the ON/OFF button.
2. Once the boot logo ARNOVA is displayed, release the volume button +.
The ANDROID green robot is displayed.
3. Once the ANDROID green robot is displayed, press simultaneously the volume button + and the ON/OFF button.
The Android system recovery screen is displayed.
a. Use the volume buttons to navigate
b. Use the ON/OFF button to select an option

To restore the default parameters of your tablet:
1. In the Android system recovery, select Wipe data/factory reset;
2. Select Yes -delete all user data.
3. Select Reboot system now.
Your tablet reboots. Redefine your parameters through the wizard.
Your tablet is restored to its default settings.


To access Recovery mode on the ARNOVA 9G3
To access to the recovery mode:
1. Hold down the Home button and press the ON/OFF button.
2. Once the ARNOVA boot logo is displayed, release the Home button.
The ANDROID green robot is displayed.
3. Once the ANDROID green robot is displayed, press simultaneously the volume button + and the ON/OFF button.
The Android system recovery screen is displayed.
a. Use the volume buttons to navigate
b. Use the ON/OFF button to select an option

To restore the default parameters of your tablet:
1. In the Android system recovery, select Wipe data/factory reset;
2. Select Yes -delete all user data.
3. Select Reboot system now.
Your tablet reboots. Redefine your parameters through the wizard.
Your tablet is restored to its default settings.


To access Recovery mode on the ARNOVA 8cG3/8bG3
To access to the recovery mode:
1. Hold down the volume button - and press the ON/OFF button.
2. Once the boot logo ARNOVA is displayed, release the volume button -.
The ANDROID green robot is displayed.
3. Once the ANDROID green robot is displayed, press simultaneously the volume button + and the ON/OFF button.
The Android system recovery screen is displayed.
a. Use the volume buttons to navigate
b. Use the ON/OFF button to select an option

To restore the default parameters of your tablet:
1. In the Android system recovery, select Wipe data/factory reset;
2. Select Yes -delete all user data.
3. Select Reboot system now.
Your tablet reboots. Redefine your parameters through the wizard.
Your tablet is restored to its default settings.

Sep 16, 2012 | Tablets & eReaders

1 Answer

I need help on restoring my compaq armada e500


Hi Welcome to FixYa!
You could try these steps on restoring your laptop into its factory defaults.
1)Turn off your computer if it is on. Wait for the system to shut down completely. Once it is off, press the "Power" button to turn it back on. Press the "F10" button at the top of the keyboard repeatedly as soon as you see the screen turn on. This will let you enter the setup menu.
2)Use the arrow keys to move between the various menu tabs at the top of the screen. Press the "Right" button until the "File" tab is highlighted, then press the "Enter" button to enter this menu. Here you can make changes to the settings of your computer, or in this instance, restore factory default settings.
3)Use the "Up" and "Down" arrow buttons to move to the "Restore Defaults" option, then press enter. You will see a screen asking "Are You Sure You Wish to Restore System Defaults?" Press the "Y" button to continue. The system will begin restoring your default settings. Do not press a button until a screen says "System Defaults Restored."
4)Use the arrow keys to move down to the "Save Changes and Exit" option and press "Enter." The system will save your changes and automatically reboot your computer. You do not need to press "F10" this time as the computer will start Windows normally. You will see the factory settings have been restored once the system loads.
Hope this could help!


  • Jul 07, 2011 | Compaq Armada E500 Notebook

    1 Answer

    My dopod 818 pro gets hanged on start up at htc innovation logo....please help


    do a hard reset, beware all data will be lost and you need to calibrate screen again.
    press two soft keys above call and end button press power button and insert stylus in reset hole,
    phone will display some thing press green send button to restore or format.
    you are done

    Dec 22, 2010 | Dopod 818 Pro Smartphone

    1 Answer

    When starting my new tomtom accidentally installed


    hello. i recommend that you do a factory reset as follows: With the device turned off, press and hold the TALK/SEND, END and POWER buttons until you see a message on the screen. Release the TALK/SEND, END and POWER buttons. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset. Once the restore screen appears press Volume Up to restore the device to its factory settings or any other button to cancel. Once complete press Volume Up to reboot.

    Nov 12, 2009 | GPS

    1 Answer

    Transfered memory to a storage card.


    you could try a hard reset (It will delete everything like files/contacts etc thought)
    Hard Reset
    press and hold the left and right soft keys together and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press SEND to restore factory default, press END to exit', if you press SEND Your device will be set back to factory default settings.than Press "OK" to boot...

    Mar 19, 2009 | Dopod D810 Smartphone

    1 Answer

    I need to reset my password for my Sprint HTC Touch MP6900


    Hard Reset
    Press and hold the TALK and END buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
    Release the stylus, but continue pressing the TALK and END buttons until you see the following message on the screen:This operation will delete all your personal data, and reset all settings to manufacturer default. Press Action to restore manufacturer default, or press other keys to cancel.
    Release the TALK and END buttons, and then press ENTER on your device.
    Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.

    Another way of clearing the device storage and reset all setings back to factory default settings is to use the Clear Storage feature. You will lose all your data and files on the device storage when you use Clear Storage, so make sure to do a backup first.

    Tap Start > Settings > System tab > Clear Storage.
    Enter “1234” then tap Yes.


    Nov 20, 2008 | HTC Touch Cell Phone (Unlocked) - Soft...

    1 Answer

    Hi im wondering if theres something i can press to restore 2 factory defaults on my packardbell mit-drag-d as it can be done on my acre laptop


    Here is the standard Acer Recovery Instructions

    1. Power on the machine
    2. At the white ACER BIOS screen, hold the “Alt” key and press the “F10” key simultaneously to start Acer eRecovery
    3. Once eRecovery has loaded, click “Restore to Factory Default Settings”
    4. Click “OK” to continue
    5. From here, the eRecovery process will update all the data on the C: drive and restore a fully functional factory image (approximately 10 minutes).
    6. Once eRecovery has run, press “OK” to reboot unit

    Oct 06, 2008 | Computers & Internet

    1 Answer

    Printing issue


    In order to proceed with the solution to your problem, we'll need to save the current settings on your Crown printer and then restore the printer to its original factory settings as shipped. Your current settings will be saved, and can be restored after we finish this troubleshooting session. You will need to access the printers front panel in order to perform the following settings.
    Procedure to save your current printer settings
    Procedure to restore printers original factory settings
    Procedure to restore your saved printer settings


    Procedure to save your current printer settings
    1. Make sure the Online light is lit and that the display reads Idle.
    2. Press the Online/Offline button to take your printer offline.
    3. Press the Menu button once. The display should read Operator Control.
    4. Press the Right Arrow button once. The display should read Administration.
    5. Press the Select button once. The display should read Communications.
    6. Press the Left Arrow button until you see Miscellaneous in the display.
    7. Press the Select button once. The display should read Save Defaults.
    8. Press the Select button again. The display should read No.
    9. Press the Left Arrow button once. The display should read Yes.
    10. Press the Select button.
    11. A few seconds should pass until the display reads Yes Is Selected.
    12. Press the Online button twice to take the printer online while the display reads Idle. Your current printer settings are now saved and you are ready to proceed with returning the printer to its original factory settings.

    Procedure to restore printers original factory settings
    1. Make sure the Online light is lit and that the display reads Idle.
    2. Press the Online/Offline button to take your printer offline.
    3. Press the Menu button once. The display should read Operator Control.
    4. Press the Right Arrow button once. The display should read Administration.
    5. Press the Select button once. The display should read Communications.
    6. Press the Left Arrow button until you read Miscellaneous in the display.
    7. Press the Select button once. The display should read Save Defaults.
    8. Press the Right Arrow button. The display should read Restore Defaults.
    9. Press the Select button once. The display should read Factory Defaults.
    10. Press the Select button again. The display should read No.
    11. Press the Left Arrow button once. The display should read Yes.
    12. Press the Select button. Yes Is Selected will appear in the display.
    13. A few seconds will pass and the printers display should read Disk And Flash Sys Loader.
    14. Your printer will reboot with the original factory settings and return to Idle.

    Try a test print. Does the problem still exist?

    Procedure to restore your saved printer settings
    1. Make sure the Online light is lit and that the display reads Idle.
    2. Press the Online/Offline button to take your printer offline.
    3. Press the Menu button once. The display should read Operator Control.
    4. Press the Right Arrow button once. The display should read Administration.
    5. Press the Select button once. The display should read Communications.
    6. Press the Left Arrow button until you read Miscellaneous in the display.
    7. Press the Select button once. The display should read Save Defaults.
    8. Press the Right Arrow button. The display should read Restore Defaults.
    9. Press the Select button once. The display should read Factory Defaults.
    10. Press the Right Arrow button. The display should read Custom Defaults.
    11. Press the Select button. The display should read NO.
    12. Press the Left Arrow button once. The display should read Yes.
    13. Press the Select button. Yes Is Selected will appear in the display.
    14. A few seconds will pass and the printers display should read Disk And Flash Sys Loader. Your printer settings are now restored to their original saved settings

    Try a test print, does the problem still exist?

    Sep 24, 2008 | Minolta magicolor 3100 Laser Printer

    1 Answer

    Hardreset


    1..Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the
    same time, use the stylus to press the RESET button at the bottom
    center part of your device.

    2..Release the stylus, but continue pressing the two soft key buttons.
    Release them only when you see the following message on your
    device screen:
    “Press SEND to restore factory default, press END to quit.“

    3..Press green telephone icon on your device

    Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before
    a hard reset is performed.

    Nov 05, 2007 | HTC P3600 Pocket PC

    Not finding what you are looking for?
    Dopod D810 Smartphone Logo

    Related Topics:

    61 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dopod Computers & Internet Experts

    Brad Brown

    Level 3 Expert

    15000 Answers

    castletech
    castletech

    Level 3 Expert

    364 Answers

    Gary Paulson

    Level 2 Expert

    37 Answers

    Are you a Dopod Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...