Question about Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)

1 Answer

Connection problems my computer is on vista and ive got a belkin usb receiver and if i plug it in i will get a connection for about 20 seconds then it goes and i carnt get the connection back unless i plug it in and out again but stilll then i loses connection after 20 seconds again

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 113 Answers

Hi! If you are using PC desktop computers and have a multiple USB connection, try connecting the usb at the back of the CPU cause front and rear connection has a different power speed. then restart. but if you are using a laptop install the belkin usb receiver driver first. Season Greetings to you!

Posted on Dec 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red light


Is your ISP connected to the Belkin? Try a Ethernet cable connected to the Belkin to verify that it is receiving a signal. Are the LED's blinking on the Belkin? Shut down the computer, unplug the Belkin wait 30 seconds or so, check ALL cables and connections , plug in the Belkin wait for selftest, reboot computer.

Dec 20, 2012 | Belkin Surf N300 Wireless N Router

2 Answers

My belkin router n3000 stopped working out of the blue , internet connection shows up but no internet


Try recycling the router by unplugging it then after 20 seconds plug it back in. See if you can stay connected. If not, unplug the modem and the router, then plug the modem in and let it cycle up for about a minute or two, then plug the router in and let it cycle up.

If you turn your computer and router off at night, then when you turn them back on, if the router boots up before the modem, it will have connection problems. A power outage in the house causes the same thing if the router cycles up before the modem.

Jun 08, 2012 | Belkin Wireless Surf Router (F7D2301)

2 Answers

Belkin F4U017 7 port USB hub Connected to a Windows Vista 64bit computer Windows updates are automatic When plugged into the computer, Device manager reports the hub as a "Bluetooth Radios: Broadcom...


I just had the same problem and was able to figure our a permanent fix.Judging by the date of you post, I'm guessing you've already remedied this problem one way or another. But just in case you haven't or someone else is having the same problem, I'll go ahead and post what to do. First, make sure you leave the USB hub plugged in right now so that Device Manager lists what it thinks is the Bluetooth device. Go into Control Manager > Hardware & Sound > Device Manager. Right click on Bluetooth device that is showing up in error. From the dropdown box, select Properties. Click the Driver Tab. Click Uninstall. Check "Delete the driver software for this device." Click OK. Unplug your USB hub for a few seconds, then plug it back in. Windows should now recognize it as a "Generic USB hub." You should be good to go. Just remember not to install that update again or try to update the driver for the Generic USB hub. If you do, you'll end up with the same problem. I hope this helps someone out there.

Sep 24, 2010 | Belkin (F5U237) 7-Port USB Hub

1 Answer

Belkin wireless G router and MicroNet Realtek RTL8187B USB


I got the answers (for free) from Belkin's excellent technical support.

Many thanks.

Jun 18, 2009 | Belkin (F5D7230-4) Router (587009)

1 Answer

Belkin 802.11a/b/g usb adapter


It sounds like the plug on the USB wireless dongle is bad or the usb ports in your computer are having problems. My Toshiba notebook does the same thing with the two usb ports near the front of the computer but works fine from the two on the back. When you have a flash drive plugged into the USB do you frequently get the new hardware found message as if you had unplugged and replugged the drive? If you have a powered external USB hub try plugging that in first then when that is stable plugging the USB wireless dongle into the hub rather than the computer. If it is stable then the problem is on the power pin in the USB port of your computer. Good Luck

May 10, 2009 | Belkin Pre-N 802.11g/b Wireless Adapter

1 Answer

Belkin (F5D7050) 802.11a/ Wireless Adapter


I just noticed that it is a 802.11a/ . "a" wireless products do not work correctly and you need an "a" router to connect to. The "g" protocol is the most common and reliable.
If it is a new adapter, I would return it and get a 802.11 g adapter, not a USB.. they cost about $20.

Sep 28, 2008 | Computers & Internet

1 Answer

I had a home network set up between 2 Dell Dimensions computers Computer 1.) which as the broadband modem and Netgear Router on it "this computer is a windows xp". Computer 2.) with the Belkin...


Assuming you can't get it to run from the desktop icon, as long as the driver is installed which it should be, you don't need Belkin software to run your connection.

the easiest way in Vista is to go to control panel>network and sharing centre and see if network discovery is ticked green.

If not on top left of window is connect to a network, then see if your wireless connection is listed, if so click connect, if not at the bottom of the window, click set up a connection or network and follow the wizard.



Sep 10, 2008 | Belkin Computers & Internet

1 Answer

Belkin suddenly not working


have you reinstalled the Belkin drivers for the dongle to work?

Aug 20, 2008 | Belkin (F5D7050) 802.11a/g/b Wireless...

1 Answer

Lose wireless internet when printer is on.


the only thing that connects the printer to the internet fault is the fact that the printer and your belkin are both usb connected. If you are using a laptop then it could be a usb power problem and the motherboard is disconnecting the belkin adapter for some reason, the only one i can think of is a power problem. The same can apply to a desktop pc if there is a usb problem Firsly i assume you are using the belkin software to connect the usb adapter to the router, so on your taskbar on the right there is normally the little aerial type icon for the belkin adapter and a little pc screen showing the connection also, if you right click on one of theses icons you should get a line reading 'enable windows WZC', if you do get the option enable it and try using the windows connection software instead of the belkin as it may stop the disconnecting. Also ensure that when you installed the software to your printer your firewall and antivirus was dissabled as certain elements to the driver may not have been installed. Lasly, try using different usb ports if you have spare ones, with both the printer and the adapter as sometimes the chip on the board may be instructing the usb ports incorrectly as to which is required first, as windows asks for certain things eg input/output ports to be used first,in other words the IRQ (interupt request) may be causing the problem.

Jun 23, 2007 | Belkin F8T003 Bluetooth (F8T003V) Wireless...

4 Answers

Driver for Canon EOS 400D


This camera does not require a driver on windows XP. The most common cause of USB related communication issues is the USB cord itself. Second most common cause is the USB port on the camera as they are easily damaged. You can fix the problem by buying a USB card reader instead of plugging the camera directly into your PC. If you use the camera's USB port it will eventually fail, they simply can not last through years of plugging and unplugging and the bumping around associated with use of the on board USB port. With the card reader you simply remove the memory card from the camera, plug it into the reader and then proceed to get your pictures. It is simple, reliable, and all around the best solution to this and all problems related to communicating with your camera over USB.

Jun 16, 2007 | Canon EOS 400D / Rebel XTi Digital Camera...

Not finding what you are looking for?
Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...