Question about Logitech QuickCam for Notebooks Deluxe

1 Answer

Mic problems I have the logitech quickcam delux for notebooks II cant hear anyone through the speakers of my laptop Im not sure that the mic is set up right or it just doesnt work. need help to find out which it is Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now see and talk to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My computer speakers stopped working after installing Logitech quickcam deluxe for notebooks. Please help.


Run an audio check

XP
Plug in your webcam or headset or mic you wish to use with your webcam
Control Panel (Classic View)
Open 'Sounds and Audio Devices' folder and click on the 'Volume' tab - make sure the speakers are not muted, open 'Speaker volume' and set the sliders toward the upper end.
Open 'Audio' tab - make your preferred mic the default device in the 'Sound recording window'
Open 'Volume' below the window to ensure the mic is not muted
Click 'Apply' and 'OK'
Restart your computer
Configure the webcam / mic to your chat program

VISTA
Plug in your webcam or headset or mic you wish to use with your webcam
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
Right click on the volume graph and select 'Show disabled devices' and 'Show disconnected devices'
To set your preferred mic as default - click the mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Aug 28, 2010 | Logitech QuickCam Deluxe for Notebooks

1 Answer

No sound


You may have a laptop with a built in mic or headphones with built in mic and webcam with built in mic
You need to set your webcam mic as default
Vista
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Configure to your chat program

May 23, 2010 | Logitech QuickCam Deluxe for Notebooks

2 Answers

Sound won't work


make sure the webcam mic is set as default - especially importsnt if you have laptop with a built in mic as well
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Configure to your chat program

May 02, 2010 | Logitech QuickCam Communicate STX Personal...

1 Answer

I can hear the person on the other end but they can't hear me. when i do the practice call it works fine. I've already checked my computer and volume settings and Logitech program settings and nothing...


You do not say what your computer set up is - You may have a laptop also with a built in mic
check these settings

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays
Restart computer
CONFIGURE TO CHAT PROGRAM

Jan 18, 2010 | Logitech QuickCam Messenger Web Camera

1 Answer

Dont know why i cant hear they can hear me ok used to be ok but not now any ideas of what i can do


Typical audio set up

Laptop x webcam/mic x Vista x Yahoo Messenger
If you have an earlier OS, you may have to access your hardware from the Control Panel.

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays
Restart computer
CONFIGURE TO YAHOO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Calling and Audio
Set mic and speakers to show Default equipment
Run call up assistant to test audio equipment > Apply > OK

Jan 11, 2010 | Logitech QuickCam Deluxe for Notebooks

1 Answer

I am trying to set up my Logitech QuickCam Deluxe for Notebooks but when I am using the Logitech Audio Tuning Wizard I dont get past the microphone test, are my settings wrong? what settings should I have...


Logitech Audio Tuning Wizard ????
I have this webcam - The settings I have made in 'Settings' ( 2 gearwheels) on the Logitech toolbar are:_
Default mic = 'microphone 2 - logitech notebook'
Volume adjustment - midway
Suppress background noise - box checked

In addition my audio settings for yahoo messenger:-
Laptop x webcam/mic x Vista x Yahoo Messenger
If you have an earlier OS, you may have to access your hardware from the Control Panel.

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays
Restart computer
CONFIGURE TO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Calling and Audio
Set mic and speakers to show Default equipment
Run call up assistant to test audio equipment > Apply > OK

Dec 23, 2009 | Logitech QuickCam Deluxe for Notebooks

1 Answer

No sound when connected on aim


Is your microphone integrated into your webcam? Make sure the correct device is selected. Go into Edit, Settings, Enhanced IM. Under Audio and Video, make sure the Microphone device selected is a functioning mic, such as Logitech Mic, or if using a headset, select the USB headset (if usb) or your sound card if using a mic plugged into your built in or add-on sound card.

Dec 01, 2008 | Logitech QuickCam Connect Webcam

1 Answer

Mic trouble


I have installed software, web Cam works fine.
Down loaded SKYPE ,but when speaking with another person ,I could see them and hear them OK, but they were unable to see me although sound communication was fine. Is this a web cam setting problem or Skype problem.

Oct 12, 2008 | Logitech QuickCam for Notebooks Deluxe

1 Answer

Logitech Quickcam Communicate Delux Auidio Problems with Skype


I had a similar problem, the solution was as simple as not playing your voice through the speakers. The problem sounds like one of feedback. There are companies that sell phones that hook up to your usb port and will not cause this type of problem. Another solution may be lowering the volume on your mic.

Aug 20, 2008 | Logitech Quickcam Chat Webcam

2 Answers

Sound


they may need to increase the mic volume in the sound settings, and even better if they are using a laptop it may well have mic boost in the settings. Tell them also to make sure they set the cam up in the relevant im programme they are using.

Feb 09, 2007 | Logitech QuickCam Pro 5000 Webcam

Not finding what you are looking for?
Logitech QuickCam for Notebooks Deluxe Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Webcams Experts

gaucherre

Level 2 Expert

180 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

378 Answers

Pieter Vleeshouwers

Level 3 Expert

1410 Answers

Are you a Logitech Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...