Question about InFocus LP 240 Multimedia Projector

2 Answers

Sound from an InFocus LP240 Projector

I've just been given an InFocus LP240 Projector and have managed to connect it to my playstation 2 but can't get any sound. The InFocus LP240 has a one socket at the back that says 'volume in.' Can anyone tell me what sort of speaker / connecter I need? Do I have to have an amp or will just a pair of speakers do? Thanks.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 167 Answers

May I mention that in no way are the speaker(s) in the projector even close to adequate to use for a video gaming. You can buy an inexpensive set of powered computer speakers wit a sub-woofer ($35-$75) that will be worth every penny! Don;t even waste your time messing around with the tiny useless "speakers" in the projector.

Take care!
PS. You can find a decent powered system at Best Buy, radio Shack or even Home Depot.

Posted on Dec 29, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,236 Answers

It's just a line level signal with a 1/8" stereo phono jack. there is an amp and speakers in the projector, but they're meant for presentations, so there's not much to them. but there is no audio out coming from the projector, so you'd need a separate amp and speakers coming from the ps2.

Posted on Jun 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Infocus LP240 fan shuts off


If you want you can check the voltage at the power conector on de main board. but the problem are the fans, replace the fans, and check the routing cable, its very important.

Jun 25, 2010 | InFocus LP 240 Multimedia Projector

2 Answers

Lp240 projector


power supply is bad and needs to be replaced. unfortunately, there are no parts for this model. infocus no longer sells them, and they were made by another company that no longer makes power supplies. therefore, no schematics either. sorry.

Dec 21, 2009 | InFocus LP 240 Multimedia Projector

1 Answer

Projector LP240 has no power


replace the power supply. the caps go bad on it after a while. you could get the part from and infocus service center and do it yourself or send it in to them and let them repair it. either way, try av solutions in ny. they're really good. www.avsolutionsny.com

Dec 11, 2009 | InFocus LP70+ Multimedia Projector

1 Answer

InFocus LP240 Projector won't turn on.


there is a fuse on the power supply next to the plug (on the inside), but this model of projector has power supply issues. the biggest being that infocus no longer has parts, schematics, or component cross references for the lp240. the circuit boards were made by another company that made had their own components and now no longer makes circuit boards (they make fans and bearings), and they have no schematics either. so, i'm sorry to say that the machine is doa. there are no replacement parts available and almost no way to fix the old ones.

May 19, 2009 | InFocus LP 600 Multimedia Projector

2 Answers

Infocus Lp240 Projector Will not power on NEW BULB. Red light Blinks on and off.


The owner's manual should have a troubleshooting chart that will indicate what the blinking lights mean. If the new bulb did not clear it, the problem may be the ballast (part that starts the bulb). Also, when you replaced the lamp, you should also reset the lamp timer. Some units will continue to indicate a lamp needing replacement until the counter is reset. The procedure for that should also be in the manual.

Keep us posted.

Dan

Dec 18, 2008 | InFocus LP290 1100 Lumen XGA LCD Projector...

1 Answer

Regarding Infocus projector connection to Sony TV


the projector does not have an rf connector, so you have to have a modulator that has rf in and composite video and audio out.

Jun 17, 2008 | Multimedia Projectors

1 Answer

Infocus LP240 projector will not power up


if you don't even get an led, it's the power supply. it may just be the fuse on it. take the top off and see if the fuse is blown. but make sure to replace it with the exact size and type.

Jun 16, 2007 | InFocus LP210 Multimedia Projector

Not finding what you are looking for?
InFocus LP 240 Multimedia Projector Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Multimedia Projectors Experts

Juan Carlos Pacheco

Level 1 Expert

36 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Are you an InFocus Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...